Lucknow Development Authority Tender

... More
The LDA has issued a formal invitation for competitive bids for the Lucknow Development Authority project, for Anant Nagar Awasiya Yojana (mohan Road) Ke Antargat Sector-5 Me Prastawit 9m Chauri Sadak Par Sadak, Trench, Hume Pipe, Sewerage Evam Drain Ka Nirman Karya. (part-c1) in Lucknow, Uttar Pradesh, with an estimated contract value of Rs. 5,21,69,822. The bid opening date for this tender is 24-05-2025 and the last date for bid submission is 12-06-2025. Interested bidders for Lucknow Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Lucknow Development Authority - LDA Tender

Works
Civil And Construction
Drainage Work
Eprocure
Opening Date24 May 2025
Closing Soon12 Jun 2025
Tender Amount₹ 5,21,69,822 
Notes
Download

AI Insights

Bid Capacity
... View More
The formula for bid capacity is {[AxNx2]-B} Where, A= Maximum turnover in construction works executed in any one year during the last five years N= Number of years prescribed for completion of work for which bid has been invited. B= Value of existing commitments and on going works to be completed during the period of completion of work for which bid has been invited.
Technical Capacity
... View More
The required prior work experience for the bidder varies depending on the nature of work, including experience in similar works such as bituminous road work, building construction, sewer and water supply, survey work, and maintenance work. The bidder should have satisfactorily completed similar works in the last 7 years, with specific requirements including: - Three similar completed works each costing not less than 40% of the estimated cost, - Two similar completed works each costing not less than 60% of the estimated cost, - One similar completed work each costing not less than 80% of the estimated cost. The bidder should have average annual turnover worth minimum 40% of the estimated cost during the last five consecutive years. The bidder should demonstrate that they have access to, or have available, liquid assets and/or credit facilities of not less than 10% of the value of the contract/contracts applied for. The bidder should also submit an undertaking that they will be able to invest a minimum cash up to 25% of contract value of work during implementation of work. The bidding capacity of the contractor should be equal to or more than the estimated cost of the work put to tender, calculated using the formula: Bidding Capacity = {[AxNxM]-B}, where A is the maximum value of civil engineering works executed in any one year during the last five years, N is the number of years prescribed for completion of the works, and M is 2.0. The value of existing commitments and on-going works (B) should be calculated and provided in the qualification information section. The bidder should also provide information on the total value of civil engineering construction work performed in the last five years, with a certificate from a Chartered Accountant. The bidder should have completed similar works with a value of at least 40% of the estimated cost, and should have a positive profit after tax in at least three years out of the last five consecutive years. The bidder should also provide details of similar works completed, including the project name, employer, contract number, value of contract, and date of completion. The amount of liquid assets and/or credit facilities required is not less than 10% of the value of the contract/contracts applied for, and the bidder should be able to invest a minimum cash up to 25% of contract value of work during implementation of work. The percentage of similar works completed is not explicitly mentioned, but the bidder should have average annual turnover worth minimum 40% of the estimated cost during the last five consecutive years. The required prior work experience for the bidder includes experience in specific areas such as: 1. Bituminous Road work, Resurfaceing work: Experience in Bituminous Road Work Only. 2. Building Construction/ Multistory Building Construction: Experience in building / Multistory building construction only. 3A. Sewer and water supply/ OHT Construction: Experience in any such similar work (Registered Contractor of Jal Nigam will also be eligible for participation). 3B. Sewer Cleaning: Experience in such work only. 4. Survey work- Topographical survey, level, contouring etc.: Experience in such survey work only. 5A. C.C. Road work, RCC Drain, RCC Retaining Wall. RCC Divider, Culvert: Experience in any such similar work. 5B. Sinage, Sign Board, Flex board, Hording etc.: Experience in such similar work only. 5C. Brick Drain, Foothpath, Interlocking Tiles, Boundary wall, Masonary work, Building Repair work: Experience in any such work only. 5D. Miscillinious Work - Divider and Grill Painting, Earth Filling, leveling, Garbage Desposal, Road and Drain Cleaning, Jungle Cleaning etc.: Experience of same type of work. 6. Maintenance Work: (a) Maintenance of Horiculture Work: Experience of Horticulture work Only. (b) Maintenance of Appartments/ Buildings/ Colony: Experience of Appartments/Buildings only, such as House keeping, Supply of Labour etc. The values and percentages mentioned include: - 40% of the estimated cost for average annual turnover - 10% of the value of the contract/contracts applied for for liquid assets and/or credit facilities - 25% of contract value of work during implementation of work for minimum cash investment - 40% of the estimated cost for similar works completed - 60% of the estimated cost for similar works completed - 80% of the estimated cost for similar works completed - 2.0 for the value of M in the bidding capacity formula - 3 years out of the last 5 consecutive years for positive profit after tax.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
ANANT NAGAR AWASIYA YOJANA (MOHAN ROAD) KE ANTARGAT SECTOR-5 ME PRASTAWIT 9M CHAURI SADAK PAR SADAK, TRENCH, HUME PIPE, SEWERAGE EVAM DRAIN KA NIRMAN KARYA. (PART-C1)
ANANT NAGAR AWASIYA YOJANA (MOHAN ROAD) KE ANTARGAT SECTOR-5 ME PRASTAWIT 9M CHAURI SADAK PAR SADAK, TRENCH, HUME PIPE, SEWERAGE EVAM DRAIN KA NIRMAN KARYA. (PART-C1)
Report Missing Document

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Construction of granular sub-base by providing close graded Material,mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

1041.41

4185

-

... More
Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub - base / base course on well prepared surface and compacting with vibratory roller to achive the desired density

1041.41

4210

-

... More
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom

4165.65

13

-

... More
Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.

208.28

10360

-

... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern

2777.1

826

-

... More
Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe under footpath, including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for shape of bell mouth, including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete.

62

2409

-

... More
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.

277.71

441

-

... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

124.97

7992

-

... More
TRENCH WORK 9.0 Mtr (Both Side)

-

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All Kinds of soil

1827.66

140

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

115.75

5670

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

4995.6

665

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

548.3

732

-

... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete using pigmented of approved colours as per engineer-in-charge Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum

548.29

7508

-

... More
Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

34863.02

71

-

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

2851.16

136

-

... More
TRENCH WORK 9.0 Mtr (Single Side)

-

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All Kinds of soil

474.72

140

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

30.07

5670

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

1297.57

665

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

142.42

732

-

... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete using pigmented of approved colours as per engineer-in-charge Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum

142.41

7508

-

... More
Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

8943.35

71

-

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

814.61

136

-

... More
HUME PIPE 9.0 Mtr

-

-

-

... More
Excavation for depth upto 1.5m below ground level for laying sewers, manholes, gully pits,chambers,sumps etc. in ordinary soil (earth sand,loam and clay) including dressing,leveling,refilling of trenches in 20 cm. layers watering sand ramming the same including removal of surplus earth of other dismantled materials upto a distance of 50m. from the centre of trences.

1248.75

209

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:5:10 (1 Cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) 1000 mm. dia.

43.29

5149

-

... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 450 mm dia R.C.C. pipe

666

1280

-

... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of NP-2 pipes including bed concrete as per standard design : 450 mm diameter NP-2 pipe (Both Sides)

666

1539

-

-

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kind of soil

2002.62

140

-

... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

176

5381

-

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

705.75

7145

-

... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.

55401.38

71

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

380

309

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

4750

665

-

... More
12 mm cement plaster 1:4 (1 cement : 4 coarse sand)

3215

282

-

... More
SEWERAGE

-

-

-

... More
Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge.

50

2717

-

... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

1730

278

-

... More
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. Depth not exceeding 1.5m.

1360

110

-

... More
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. Depth exceeding 1.5m. but not exceeding 3.0m.

137.5

122

-

... More
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. Depth exceeding 3.0m. but not exceeding 4.5m.

5

149

-

... More
Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be left permanently in position. (Face area of timber permanently left to be measured @ 5% of item no. 3).

7.13

1336

-

... More
Providing and laying DWC (SN8) pipes conforms the IS 16098 (Part 2): 3013 Structured-Wall plastics piping systems for Non- Pressure drainage and sewerage –Specification including jointing with seal ring complete as per instruction of Engineer-in-charge. 150 mm. dia. DWC (SN8) Pipes

730

348

-

... More
Providing and laying DWC (SN8) pipes conforms the IS 16098 (Part 2): 3013 Structured-Wall plastics piping systems for Non- Pressure drainage and sewerage –Specification including jointing with seal ring complete as per instruction of Engineer-in-charge. 250 mm. dia. DWC (SN8) Pipes

1000

803

-

... More
Supply of all materials, labour and T&P and constructing circular manholes of following sizes as per type desing and drawing. 900mm dia, 0.0-1.5m depths

45

20253

-

... More
Supply of all materials, labour and T&P and constructing circular manholes of following sizes as per type desing and drawing. 1200mm dia, 0.0-3.00m depths

25

58925

-

... More
Addition or substraction due to variation in shaft for following sizes of manholes. 900mm dia, 0.0-1.5m depths

9

10702

-

... More
Addition or substraction due to variation in shaft for following sizes of manholes. 1200mm dia, 0.0-3.005m depths

7.5

21716

-

... More
Providing and laying in bedding below pipe cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size derived from natural sources) 100 mm thick

45

5381

-

... More
Providing and laying cement concrete 1:5:10 ( 1 Cement : 5 Coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of pipes including bed concrete as per standard design. 250 mm diameter pipe

1000

803

-

... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

73

8580

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.