Lucknow Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Lucknow Development Authority - LDA Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date26 Mar 2025
Closing Soon9 Apr 2025
Tender Amount₹ 14,99,43,998
Technical
Technical
Class Of Bidder
... View More
Category A
Bid Capacity
... View More
BiddingCapacity(Rs.) = AxNx2 - B
Technical Capacity
... View More
The bidder should have experience in similar works completed during the last seven years. The bidder should have completed works of similar nature during the last seven years. The bidder should have prior work experience of at least 5 years in civil engineering construction. The value of similar works completed is not explicitly mentioned, but it should be at least equal to the estimated cost of the work. However, the bidder should have satisfactorily completed similar works in the last 7 years, with the following requirements: * Three similar completed works each costing not less than Rs………Crores (40% of estimated cost)
* OR Two similar completed works each costing not less than Rs…..........Crores (60% of estimated cost)
* OR One similar completed work each costing not less than Rs…............ Crores (80% of estimated cost) The bidder should also have average annual turnover worth minimum 40% of the estimated cost during the last five consecutive years.
Costs
EMD
₹ 29,98,900Document Cost
₹ 4,366Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_LDAUP_1022478_1Tender No
149/ENIVIDA/CE/2025-01Tender Authority
Lucknow Development Authority ViewPurchaser Address
-Website
http://http://www.ldalucknow.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Indira Gandhi Pratishthanme isthit Mercury, Mars, evam Jupiter Auditorium ke antergat antrik Facelifting ka karya
Indira Gandhi Pratishthanme isthit Mercury, Mars, evam Jupiter Auditorium ke antergat antrik Facelifting ka karya
BOQ Items
... More
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 60 metres lead. DSR(15.31)
1729.8
165
286818.14
... More
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm DSR(15.39.2)
1294.27
61
79494.06
... More
Dismantling of Carpet layed in floors & stairs of Auditorium etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. MR
1607.98
50
80399
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR(15.60)
200
208
41702
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once for every month for duration of scaffolding (Maximum 3 Months). DSR(14.72)
4433.28
267
1184572.42
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% DSR(2.34.1)
200
185
37088
... More
Treatment of existing Masonry using chemical imulsion @ 1 litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand) to the full depth of hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. DSR(2.35.4.1)
1234.6
33
41939.36
... More
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. DSR(2.35.5)
485.6
220
107293.32
... More
Providing & Fixing of Suspended Gyptone Sixto 63 Ceiling includes 20x28x30x0.5mm Gypserra™ Perimeter Channel{Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is fixed along the perimeter of existingwall with the help of HILTI HPS - 1 (6x40) impact anchor at 600mm centres. 25x10x0.5mm Gypserra™Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing itto 27x37x25x1.6mm Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM (IS277)}. SoffitCleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull outload- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. 15x45x15x0.9mmGypserra™Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } isfixed to the Gypserra™Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As perEN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbonsteel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.}. 80x26x0.5mm Gypserra™CeilingSection {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Gypserra™Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help ofGyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42),46-48HRC,Finish-Zincplating 4-6 micron} and in direction perpendicular to the Intermediate channel at 600mm c/c. Single layer12.5mm Gyproc Gyptone Sixto 63 board (meets requirement of specification mentioned under DAR no.12.45.4 in Delhi Schedule of rates (DSR)), of size 1200x2400mm having four tapered edges, 15%perforation area of board & hole size of 12mm hexagon shape , having 8 perforation sets per board andeach set of size (474x474)mm, 64mm border and 128mm center band, backed with acoustic tissue , havingNRC values 0.6, is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel ENISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres. For higher NRC value, Resinbonded glass wool of 24kg/M3 and 50mm thick can be placed on top of the board,(refer Gyptone Sixto 63-PDS for NRC values). Finally all tapered edges of the boards are to be jointed and finished so as to have aflush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTMC475), Gyproc® Joint Paper tape. Serrated steel section has effective thickness of 2T (2xdepth), better loadcarrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as comparedto plain steel section. MR
966.6
3290
3180114
... More
Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 27mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64MM diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting. 12.50mm thick tapered edge gypsum board. DSR(12.45.1)7
737.81
1071
790209.27
... More
Providing & Fixing of Armstrong Armstrong Fibre Glass Acoustical Suspended Ceiling System with 15mm thick Optra Microlook 90 Edge Tiles with Armstrong Suprafine 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95(Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, Light Reflectance ≥88% as per ASTM E-1477, Colour Black ,Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 15mm Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour BLACK having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 8.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill, as per the approved design as approved by the Architect/ Engineer -in-Charge MR MR
1449.09
3245
4702297.05
... More
Providing & Fixing of Armstrong Suspended Ceiling System with Armstrong H4988 BP4988S DUNE Bev. Teg. 600x600x15mm (Microlook) EDGE TILES WITH ARMSTRONG Silhouette Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm ,and 600x1200x15mm suitable for Green Building application, with Recycled content of 66% GW.The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and a load carrying capacity of 10 Kgs/M2.The Tile & Grid system used together, all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge
617.75
2240
1383760
... More
Providing and Fixing Armstrong or equivalent SoundScapes - Acoustical clouds which are 30 mm thick, flat glass fiber panels with Humidity Resistance RH 90% & Recycled Content of minimum 30%, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90% or in the color specified by the Architect / Engineer incharge (White/ Shell/ Tangerine/ Cranberry/ Moss/ Kiwi/ Reef/ Lagoon/ RAL co-ordinated*) . The size and sound absorption details are as below:
Sr. No. Shape Nominal Size Sound Absorption – Metric Sabin
1. Square 1200x1200mm 2.48
2. Convex 1200x1200mm 2.28
3. Concave 1200x1200mm 1.94
4. Circle 1200x1200mm 2.12
5. Hexagon 1200x1200mm 1.61
6. Trapezoid 1200x1200mm 2.15
7. Left Parallelogram 1200x1200mm 2.15
8. Right Parallelogram 1200x1200mm 2.15
The back of each panel to have embedded square frame bracket system of 610x610mm in which provisions are already made for integration of installation system for suspension of individual or grouped panels. INSTALLATION: The panels to be suspended individually using the SoundScapes Deck hanging kit. Each kit to consist of gripper structure anchors with an outer diameter of 16mm and height 23mm, aircraft cables of 1.5mm dia 2.44 LM in length and bottom end cable adjusters of 8.9mm outer diameter. Each panel to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster which are screwed in the 4 corners of the frame bracket system. The height & level of the panels can be adjusted using the bottom end cable adjusters. APPROVED MAKE - Armstrong/ Saint Gobain/ SAS MR
10
24495
244950
... More
Providing & Fixing of Forbo Flotex color/linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per Sqm , Fire Test EN-13501, Appearence Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing ,anti allergic cetrtified by British allergy foundation, anti static, stain resistant, thickness 4.3 mm and approximate weight of 4.5 k.g./sqm of roll form with acoustic sound impact 17dB. Flotex to be installed over cement based smooth level hard flooring( Made in United Kingdom). The carpet should be laid complete including SS edge profile at door. MR
1607.98
7150
11497057
... More
Providing and fixing of Engineered Wood flooring 15MM Thick range Solitary collection of Use 23/32 (Heavy Domestic/Domestic) with a Surface Abrasion Resistance of class AC3 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density 850 Kg/M3) of plank having Uni fit locking arrangement (lock strength 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge)Make-Mikasa/Luxe/Armstrong. all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge. Make-Armstrong,Mikasa,Luxe Equivalent MR
305.97
10123
3097334.31
... More
Providing and Fixing Channeled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density particle board substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminium splines using clips. as per the approved design as approved by the Architect/ Engineer -in-Charge. MR
531.36
7200
3825792
... More
Providing and supplying Acoustical Wall Paneling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire -resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size as required providing a minimum sound absorption level to be affixed to wall using Wall panel impalers and construction adhesives as per the instructions laid down by the installer as per the approved design as approved by the Architect/ Engineer -in-Charge. MR
107.45
9000
967050
... More
Providing & Making & Fixing of Commercial Wall Panneling made with Aluminium Section of 2"x1" @ 2'CC frame work cladded with 12MM Ply (Archidply/Equivalent), as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
1160.02
4318
5008966.36
... More
Providing & Making & Fixing of Commercial Wall Partition made with Aluminium Section of 1.75"x1.75" @ 2'CC frame work cladded with 9MM Ply (Archidply/Equivalent), as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
37.8
6565
248157
... More
Providing & Making & Fixing of Floor Panneling with 16MM Water Proof Board By Repairing & Refixing The Existing Commercial Under Lay Wooden Framework complete as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. MR
236.34
3750
886275
... More
Providing & Making & Fixing of Veneered Wall Paneling with 4MM Veneer complete Melamine Polish, as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
437.6
7415
3244804
... More
Providing & Making & Fixing of Laminated Wall Paneling with 5.5MM MDF & 1MM Laminate complete Gove Polish, as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
90.96
2419
220032.24
... More
Providing & Making & Fixing of Double Skin 19MM Door (Archidply/Equivalent) Veneered Both Side & Melamine Polished complete with Floor Spring, Top & Bottom Pivot, Lock Body & Handle all complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
35.39
37500
1327125
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR(13.80)
5272.43
123
649932.45
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR(13.48.1)
5272.43
153
806734.51
... More
Dismantalling & then Refixing of Old Auditorium Chair by fabric Reupholstering , all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge MR
1200
3500
4200000
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR(10.28)
77.78
610
47458.24
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR(11.41.2)
42.89
1227
52632.46
... More
Grouting the joints of flooring tiles having joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. DSR(11.48.2) DSR(15.12.2)
42.89
244
10471.16
... More
Providing & Fixing of 12MM Toughened Glass Door with all hardware as per design with edge polish m/c top & bottom pivot and bottom lock with handle all complete as per drawing, specification and direction as approved by Engineer -in-Charge. MR
18.44
19366
357109.04
... More
Providing & Fixing 12MM Toughned Glass Partition Modi float glass fixed edge to edge as per design and drawing and polished where required along with neccesary hardware all complete as per drawing, specification and direction of engineer incharge. MR
6.46
6500
41990
... More
Providing & Making & Fixing of Storage Cabinet made of 19mm board, having shelves & shutters & teak wood beading & finished surface of 1mm thick Laminate including all hardware like tower bolts, hinges, lock & handle as per approved drawing & direction of Engineer incharge. MR MR
1.44
22327
32150.88
... More
Providing & Making & Fixing of 12MM MDF Melamine Polished Skirting as per approved drawing & direction of Engineer incharge. MR MR
207.09
500
103545
... More
Providing & Fixing of Lazer Cutted Acrylic Letters Pasted on Acrylic Sheet of JUPITER AUDITORIUM LOGO & Name with Racce, Designing, Transportation, Installation & Labour complete as per desigh. MR MR
2
25000
50000
... More
Providing & Fixing of 6MM Thick High Pressure Exterior compact Laminate made out of thermosetting resign treated Kraft as core material and design paper as a finish surface. Compact laminates should be resistance to water immersion through permissible increase on thickness and mass 0.60% and board should have density 1.35kg/cm3 . Compact should be flame retardant fulfilled the criteria of under BS-476/97 and EN438-6 with classification of BS1D0 standard property with Anti-bacterial & Anti-termite (under JIS Z2801:2000 certification), Chemical resistance, Scratch resistant ,flame resistance, weather & climatic shock resistance(The manufacturer should provide10 years warranty certification on any manufacturing and moisture related defects.), and fulfilled the criteria of Green Guard Gold certification and manufactured under EN438-2&3:2005 standard complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. MR
93.95
7500
704625
... More
ELECTRICAL WORK
-
-
-
... More
Wireman for Dismentalling Old Electrical Circuit & Electrical Fittings & Fixtures DSR(1001)
50
806
40300
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit ,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. One light point with 5 Amp. switch. Group C DSR(1.10.3)
48
1157
55558.08
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. DSR(1.31)
54
376
20322.9
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. DSR(1.32)
54
462
24966.9
... More
Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required. 2x1.5 sq mm +1x1.5 sqmm earth wire. DSR(1.14.1)
3196.48
183
587640.88
... More
Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required. 2x2.5 sq mm +1x2.5 sqmm earth wire. DSR(1.14.2)
1140.1
216
247378.9
... More
Providing Drawing Connecting And Testing Of Enhanced Categoey 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specifide 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable) DSR(1.53.1)
344.1
44
15474.18
... More
Supply and fixing of ISI marked (IS : 9537 part-2 with latest ammendments) ,PVC Conduit (the class of pipe in concealed / exposed system in wall, ceiling or on floor including cutting of brick work, laying of conduit and fixing and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threading of conduit and providing necessary sockets, bends, tees, junction boxes of required sizes and chuck nuts as directed at site by the engineer-in-charge with supply of all material labour and T & P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as required. 20MM DSR(1.21.1)
344.1
100
34750.66
... More
Supply and fixing of ISI marked (IS : 9537 part-2 with latest ammendments) ,PVC Conduit (the class of pipe in concealed / exposed system in wall, ceiling or on floor including cutting of brick work, laying of conduit and fixing and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threading of conduit and providing necessary sockets, bends, tees, junction boxes of required sizes and chuck nuts as directed at site by the engineer-in-charge with supply of all material labour and T & P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as required. 25MM. DSR(1.21.2)
215
114
24598.15
... More
Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet M.R
10
1371
13710
... More
Supplying & fixing ceiling rose on the existing junction/ wooden box including connection etc. as required. DSR(1.33)
36
68
2471.04
... More
Blank plate for modular plate type switch boards wherever required. DSR(1.26)
10
31
315.6
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole DSR(2.10.1)
67
201
13532.66
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A DSR(2.13.2
1
815
815.83
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100A DSR(2.13.3)
1
968
968.1
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 4 way (4 + 12), Double door DSR(2.5.1)
1
5926
5926.97
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 8 way (4 + 24), Double door DSR(2.5.2)
1
8020
8020.19
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 12 way (4 + 36), Double door DSR(2.5.3)
2
10125
20250.48
... More
Supply & Fixing of LED Profile Light Complete as per drawing & specification as approved by the Architect/ Engineer -in-Charge M.R
440.85
1151
507418.35
... More
Supply & Fixing of LED Profile Light Driver Complete as per drawing & specification as approved by the Architect/ Engineer -in-Charge M.R
88
3795
333960
... More
Supply & Fixing of LED Step Mounting Profile Light all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips. M.R
209.98
6639
1394057.22
... More
Supply & Fixing of LED Step Mounting Profile Light Driver all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips. M.R
42
3795
159390
... More
Supply & Fixing of 12.3Watt LED Spot Light Having 24Degree Fitting & Phase Cut Dimmable Drivers (Current Selection CC) IP 20 all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM). M.R
574
4806
2758644
... More
Supply and fixing of 250mm Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent M.R
2
2193
4386
... More
Supply & Fixing of 36Watt to 46 Watt indoor Recess mounting LED square fitting for Armstrong ceiling having powder coated die cast aluminium housing body with extended heat sink and diffuser of special polycarbonate meterial and driver set complete in all respect. M.R
50
4880
244000
... More
Supply & Fixing of DG/S2.64.1.1 DALI Gateway, Basic, 2-fold, MDRC slaves. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI slave (2x64), with groups (2x16), together in broadcast or per scenes (2x16). Extensive fault and error messages are available Self-contained emergency converter (2x64) acc. EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered. Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change. all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM) M.R
4
224908
899632
... More
Supply & Fixing of SV/S30.640.3.1 Power Supply, 640 mA, MDRC KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke. The voltage output is short-circuit and overload protected. The two-color LED indicates device output status. Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke). With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz. Make-LEDADVANCE (OSRAM) M.R
2
114434
228868
... More
S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release. M.R
2
10615
21230
... More
S&F of 160 Amp 4 pole MCCB (25 KA) Thermal Magnetic release. M.R
2
12660
25320
... More
S&F of 50 Amp to 63 Amp. SPMCB (10KA). M.R
1
530
530
... More
S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve. M.R
2
740
1480
... More
S&F of 40 Amp. DP MCB (10 KA) C Curve. M.R
1
1180
1180
... More
S&F of 63 Amp. DP MCB (10 KA). M.R
1
1180
1180
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. M.R
12
1350
16200
... More
Providing & Fixing of Olivia smart dc wall fan with 18 blades patented design, mute technique, remote controlled, double ring spiral wind, smart control and energy efficient complete in all respect, as directed at site by Engineer in charge. M.R
32
18117
579744
... More
Supply & Fixing of 36Watt LED Spot Light Having 24Degree Fitting & Phase Cut Dimmable Drivers (Current Selection CC) IP 20 all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM). M.R
52
14927
776204
... More
Supply & Fixing of Acti 9 distribution board 4 Tier 56 Modules Double Door without MCB complete in all respect, as directed at site by Engineer in charge. M.R
1
11906
11906
... More
Supply & Fixing of 25A DP 100MA Optipro RCCB-INDOASIAN, complete in all respect, as directed at site by Engineer in charge. M.R
1
3420
3420
... More
STAGE LIGHTING SYSTEM WORK
-
-
-
... More
Supply, Installation, Testing & Commissioning of Hi Resolution Professional grade RGB 105 watt All weather Led Par Standard Output 15* -30* with a diffuser. Dimming 0-100%. Power consumption less than 100 watt. IP 65. Passive Cooling w/o Fan Make: Osram./A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
44
25013
1100572
... More
Supply, Installation, Testing & Commissioning of Hi resolution Warm White All weather 105watt Led Par . Standard Output 15*-30*. Dimming 0-100%. Power Consumption less than 100w Make: Osram /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
30
28405
852150
... More
Supply, Installation, Testing & Commissioning of Kreios LED Profile WW 80 watt Precise Focus; Very High Light Output; ComPact design; Flicker Free Adjustable Dimming Frequency( Via pulse Width Modultaion)Strobe & Pulse effects;7390 lumen;3000K Color Temp Make Osram /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
8
110975
887800
... More
Supply, Installation, Testing & Commissioning of Kreios LED Fresnel Light 200 watt Precise Focus ; Very High Ligt Output Compact Design ; Flicker Free adjustable Dimming Frequency Make: OSRAM/ A-PRO, all complete as per drawing and specification and direction of engineer incharge. M.R
4
110975
443900
... More
Supply, Installation, Testing & Commissioning of Moving Head Sharpy Light 330 watt ; 20 channel Multi colour Multi Gobo Make: BSM Star /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
8
74980
599840
... More
Supply, Installation, Testing & Commissioning of Smoke Generator 1500 watt Dmx Controlled . Make: BSM Star, all complete as per drawing and specification and direction of engineer incharge. M.R
1
33350
33350
... More
Supply, Installation, Testing & Commissioning of Scene Selector Programming Conmtrller Console For the above Lighting Make: BSM Star Mini Pearl, all complete as per drawing and specification and direction of engineer incharge. M.R
1
85388
85388
... More
Supply, Installation, Testing & Commissioning of 1 in 8 out Power Splitter Make: BSMStar/ NS, all complete as per drawing and specification and direction of engineer incharge. M.R
2
21563
43126
... More
Supply, Installation, Testing & Commissioning of Signal Cables/ Power Cables & Interconnects Make: Reputed, all complete as per drawing and specification and direction of engineer incharge. M.R
1
287500
287500
... More
Supply, Installation, Testing & Commissioning of Custom Clamps & accessories Make: Customized, all complete as per drawing and specification and direction of engineer incharge. M.R
1
85388
85388
... More
Supply, Installation, Testing & Commissioning of Customised Bar with hanging accessories, all complete as per drawing and specification and direction of engineer incharge. M.R
4
47438
189752
... More
Supply, Installation, Testing & Commissioning of Customised Frame For Stage Fittings, all complete as per drawing and specification and direction of engineer incharge. M.R
4
6670
26680
... More
Supply, Installation, Testing & Commissioning of Electrical Points 86 points, all complete as per drawing and specification and direction of engineer incharge. M.R
98
2875
281750
... More
Supply, Installation, Testing & Commissioning of Smoke Liquid BSM Star, all complete as per drawing and specification and direction of engineer incharge. M.R
50
950
47500
... More
Supply, Installation, Testing & Commissioning of LED Blinder Lihght DMX Controlled 200 watt, Make-A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
4
60375
241500
... More
Supply, Installation, Testing & Commissioning of Customised Mororized Hanging Lighting Bar Made of MS Frame Work & GI Hangers, all complete as per drawing and specification and direction of engineer incharge. M.R
2
212750
425500
... More
STAGE PA SYSTEM WORK
-
-
-
... More
Supply, Installation, Testing & Commissioning of 12" Two Way Line array Speaker ; 800 watt rms; 3200 watt peak Power @ 8ohms. Make: Harman M.R
11
232900
2561900
... More
Supply, Installation, Testing & Commissioning of Dual 18" Subwoofer 1600 watt rms; 6400 watt Peak Power each @ 4 ohms Make: Harman M.R
2
671700
1343400
... More
Supply, Installation, Testing & Commissioning of 12" Two way Stage Monitor 800 watt program Power each Make: Harman M.R
6
86500
519000
... More
Supply, Installation, Testing & Commissioning of Dual 8" Two way Wall mount Speaker 750watt program power each @ 8 ohms. Make: Harman M.R
4
159100
636400
... More
Supply, Installation, Testing & Commissioning of 8" Two way Wall Mountable Speaker 500 watt program Power each @ 8 ohms . Make: Harman M.R
8
120600
964800
... More
Supply, Installation, Testing & Commissioning of Dual Channel Power Amplifier 2x 2100 watt rms; 4 ohms Bridge Mode . Class D Digital Amplifier. Make: Harman-Crown M.R
3
283900
851700
... More
Supply, Installation, Testing & Commissioning of Dual Channel Power Amplifier 2x1200 watt rms; 4 ohms Bridge Mode . Class D Digital Amplifier. Make: Harman-Crown M.R
3
144700
434100
... More
Supply, Installation, Testing & Commissioning of Digital Sound Processor with 3 in 6 out. Make: Harman-DBX M.R
2
109200
218400
... More
Supply, Installation, Testing & Commissioning of 32 Channel Audio Mixer with 32 Mic Input; 6 Aux ; +48Volt Phantom Power Make: Harman-SoundCraft /A&H M.R
1
359500
359500
... More
Supply, Installation, Testing & Commissioning of Wireless Mic Dual Channel Receiver. Extended 20 Hz to 20 kHz frequency range, 32 available channels per frequency band. Make Shure M.R
3
104000
312000
... More
Supply, Installation, Testing & Commissioning of UHF Wireless Handheld mic . Make: Shure M.R
2
40600
81200
... More
Supply, Installation, Testing & Commissioning of UHF Wireless Lapel mic kit with body pack . Make: Shure M.R
2
54900
109800
... More
Supply, Installation, Testing & Commissioning of UHF Wireless headband mic kit with body pack . Make: Shure M.R
2
54900
109800
... More
Supply, Installation, Testing & Commissioning of UHF Wireless Signal Distribution system . Make: Shure M.R
1
74400
74400
... More
Supply, Installation, Testing & Commissioning of UHF Wireless Signal Distribution Antennae with coaxial cable set . Make: Shure M.R
2
56100
112200
... More
Supply, Installation, Testing & Commissioning of Dynamic Cardoid Instrumental Use Microphone For Instruments Make: Shure M.R
4
11600
46400
... More
Supply, Installation, Testing & Commissioning of Dynamic Cardoid Mic For Vocal & Indstrumental use . Make: Shure M.R
1
7400
7400
... More
Supply, Installation, Testing & Commissioning of Dynamic Cardoid Vocal & Speech Microphone with On-Off Switch Make: Shure M.R
2
13400
26800
... More
Supply, Installation, Testing & Commissioning of Good Quality Extra Sensitive Cardoid Pattern Gooseneck Microphone 50 Cm with Cardoid Capsule . Make: Shure M.R
4
24200
96800
... More
Supply, Installation, Testing & Commissioning of Surface Mount Speaker. Make Harman JBL M.R
4
29000
116000
... More
Supply, Installation, Testing & Commissioning of Dual Channel Amplifier. Make Harman JBL/Crown M.R
1
74400
74400
... More
Supply, Installation, Testing & Commissioning of 42U Equipment rack with all standard accessories. Make Dlink/Comrack M.R
1
86800
86800
... More
Supply, Installation, Testing & Commissioning of Heavy Duty Array Frame For Suspending the array Speakers. With accessories Make: Custom M.R
3
49500
148500
... More
Supply, Installation, Testing & Commissioning of L.S Cables/Signal Cables /Patch Box/Interconnects. Reputed M.R
1
385000
385000
... More
STAGE CURTAIN SYSTEM WORK
-
-
-
... More
Supply, Installation, Testing & Commissioning of Main curtain motorised curtain control system with horizontal sliding arrangement complete with fixing, Rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pulleys 3-mm steel wire rope, 1HP motor(Compton, Godrej, ) 2nos. Air breaker contactors (L&T) 2nos., micro switches for auto stop, 3nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed ,stiched in double gathering (Velvet cloth as per sample approval) size 17 M X 9 M approx. Make : Chauhan Technocraft, Customized., all complete as per drawing and specification and direction of engineer incharge. M.R
1
303600
303600
... More
Supply, Installation, Testing & Commissioning of Back curtain motorized system with horizontal sliding arrangement complete with fixing, Rails, brackets, sliding arrangement & motorized operation complete with runners, master runners, pulleys 3-mm steel wire rope, one hp motor (crompton,Godrej) 2 nos. air breaker contactors (L & T) 2 nos. micro switches for auto stop, 3 nos push button for forward, reverse and stop position The curtain should be draped to half area when in closed ,stitched in one & half gathering with black glazed cotton cloth Size- 17M X 9M. Make Chauhan Technocraft, Customized., all complete as per drawing and specification and direction of engineer incharge. M.R
1
280830
280830
... More
Supply, Installation, Testing & Commissioning of Pivote type rotating side wing made by 50 mm x 25 mm x 16 SWG tubular pipe frame work frame size 600 mm x 600 mm c/c fixed over a 6 mm commercial ply and 12 mm PU foam both side, the frame to be one coat of red oxide and two coat of black enamel paint and final fixed over a black glazed cotton steched fabric size approx 1200 mm x 7500 mm . Make : Chauhan Technocraft, Customized, all complete as per drawing and specification and direction of engineer incharge. M.R
10
35995
359950
... More
Supply, Installation, Testing & Commissioning of Main decorative frill made by as same as main curtain fabric and stitched with double gathering including decorative lace and gotas and fixed over a 32 mm dia m/s pipe fix to existing grid with required suspenders. Size approx. 17 mtrs. x 1.2 mtrs. Chauhan Technocraft, all complete as per drawing and specification and direction of engineer incharge. M.R
1
32775
32775
... More
Supply, Installation, Testing & Commissioning of Avarage decorative frill made by black glazed cotton fabric stitched with double gatharing with all required accessories, and fixed over a 32 mm dia m/s pipe suspended on exisitng grid with require suspenders, all complete as per drawing and specification and direction of engineer incharge. M.R
6
29440
176640
... More
Supply, Installation, Testing & Commissioning of Light bar made by 48 dia B class m/s pipe and 80 mm x 40 mm tubular pipe stucture suitable for light hunging and electrical cable laying and socket cuting privode fabricated light bar fixing over a exisitng grid with required suspenders and clamps including one coat of red oxide and to coat of black enamel paint. Chauhan Technocraft, all complete as per drawing and specification and direction of engineer incharge. M.R
4
36225
144900
... More
Supply, Installation, Testing & Commissioning of Light ladder made by 50 mm x 25 mm tubular pipe suitable for side light fixing, all complete as per drawing and specification and direction of engineer incharge. M.R
4
10925
43700
... More
AIR-CONDITIONING DUCTING SYSTEM WORK
-
-
-
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 0.63 mm (24 SWG) galvanized sheet steel M.R
100
1189
118950
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 0.80 mm (22 SWG) galvanized sheet steel M.R
100
1365
136500
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 1.00 mm (20 SWG) galvanized sheet steel M.R
100
1755
175500
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 1.25 mm (18 SWG) galvanized sheet steel M.R
100
2080
208000
... More
Supplying & Fixing of powder coated aluminium section
supply air diffusers/ grill with fixed air distribution grid, with MS Valume control damper for supply air M.R
25
15950
398750
... More
Supplying & Fixing of powder coated aluminium section
supply air diffusers/ grill with fixed air distribution grid, without MS Valume control damper for Returm air M.R
25
12100
302500
... More
Supply & Fixing of Eye ball jet diffuser of following dia, 300 mm M.R
10
4160
41600
... More
Supply & Fixing of Eye ball jet diffuser of following dia, 400 mm M.R
25
5850
146250
... More
Supply & Fixing of Insulated Flexible duct for Round insulated duct M.R
50
780
39000
... More
Supply & Fixing of MS fire dampers with fusible links M.R
5
15400
77000
... More
Supply & Fixing of Alluminium fresh air dampers with louvers and bird screen M.R
5
4950
24750
... More
Supply & Fixing of Fire retardent Canvass Connection M.R
5
7150
35750
... More
Supplying & Fixing of External thermal insulation on ducts with Closed Cell Elastomeric Nitrile Rubber Foam (Class - O, Fire retardent) of density 40-60 Kg/m³, 13 mm thick M.R
1225
1150
1408750
... More
Supplying & Fixing accaustic lining with 25mm thick resin bonded fiber glass of density 32 kg/cum on the inner side of ducting including flexing RP tissue paper
finished with 30 G perforted aluminium sheet. M.R
200
1050
210000
... More
Duct dismentaling and Re-installation after removing old insulation of existing duct. M.R
200
1000
200000
... More
MERCURY AUDITORIUM
-
-
-
... More
INTERIOR WORK
-
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area beyond 3 sqm. DSR(15.12.2)
5
397
1985.75
... More
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 60 metres lead. DSR(15.31)
722.3
165
119764.56
... More
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm DSR(15.39.2)
630.72
61
38738.82
... More
Dismantling of Carpet layed in floors & stairs of Auditorium etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. MR
691.49
50
34574.5
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR(15.60)
200
208
41702
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once for every month for duration of scaffolding (Maximum 3 Months). DSR(14.72)
1496.05
267
399744.56
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% DSR(2.34.1)
200
185
37088
... More
Treatment of existing Masonry using chemical imulsion @ 1 litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand) to the full depth of hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. DSR(2.35.4.1)
456.37
33
15502.89
... More
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. DSR(2.35.5)
374.8
220
82812.06
... More
Providing & Fixing of Suspended Gyptone Sixto 63 Ceiling includes 20x28x30x0.5mm Gypserra™ Perimeter Channel{Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is fixed along the perimeter of existingwall with the help of HILTI HPS - 1 (6x40) impact anchor at 600mm centres. 25x10x0.5mm Gypserra™Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing itto 27x37x25x1.6mm Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM (IS277)}. SoffitCleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull outload- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. 15x45x15x0.9mmGypserra™Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } isfixed to the Gypserra™Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As perEN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbonsteel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.}. 80x26x0.5mm Gypserra™CeilingSection {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Gypserra™Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help ofGyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42),46-48HRC,Finish-Zincplating 4-6 micron} and in direction perpendicular to the Intermediate channel at 600mm c/c. Single layer12.5mm Gyproc Gyptone Sixto 63 board (meets requirement of specification mentioned under DAR no.12.45.4 in Delhi Schedule of rates (DSR)), of size 1200x2400mm having four tapered edges, 15%perforation area of board & hole size of 12mm hexagon shape , having 8 perforation sets per board andeach set of size (474x474)mm, 64mm border and 128mm center band, backed with acoustic tissue , havingNRC values 0.6, is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel ENISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres. For higher NRC value, Resinbonded glass wool of 24kg/M3 and 50mm thick can be placed on top of the board,(refer Gyptone Sixto 63-PDS for NRC values). Finally all tapered edges of the boards are to be jointed and finished so as to have aflush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTMC475), Gyproc® Joint Paper tape. Serrated steel section has effective thickness of 2T (2xdepth), better loadcarrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as comparedto plain steel section. MR
530.85
3765
1998650.25
... More
Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 27mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64MM diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting. 12.50mm thick tapered edge gypsum board. DSR(12.45.1)
246
1071
263470.92
... More
Providing & Fixing of Armstrong Armstrong Fibre Glass Acoustical Suspended Ceiling System with 15mm thick Optra Microlook 90 Edge Tiles with Armstrong Suprafine 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95(Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, Light Reflectance ≥88% as per ASTM E-1477, Colour Black ,Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 15mm Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour BLACK having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 8.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill, as per the approved design as approved by the Architect/ Engineer -in-Charge MR MR
20
3245
64900
... More
Providing & Fixing of Armstrong Suspended Ceiling System with Armstrong H4988 BP4988S DUNE Bev. Teg. 600x600x15mm (Microlook) EDGE TILES WITH ARMSTRONG Silhouette Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm ,and 600x1200x15mm suitable for Green Building application, with Recycled content of 66% GW.The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and a load carrying capacity of 10 Kgs/M2.The Tile & Grid system used together, all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge MR
129
2240
288960
... More
Providing and Fixing SoundScapes Blade - Acoustical blade which are 40 mm thick, flat glass fiber panels with Humidity Resistance RH 90%, with factory fitted embedded metal insert with ¼” – 20 threading for fixing cable adjuster for hanging application. Soundscapes blades shall have sizes of 200x1200mm with both side laminated scrim finished with uniform water based paint on all surface (including edges). Acoustical performance of 0.65 NRC(for 400mm high x 40mm thick baffles with 400mm on centre distance and overall depth of construction 1000mm) as per ASTM C-423 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) in standard White color with Light reflectance 87% or in the color specified by the Architect (Shell / Tangerine / Cranberry / Moss / Kiwi / Reef / Lagoon), Fire Performance Class B2 – s1, d0 as per EN 13501-1 .The SoundScapes blade shall be made of Glass fibre panel with density of 110-120 Kg/ m3. The panel shall be hung using deck hanging kit comprising of griper structure anchor & cap of dia 20mm, spring loaded bottom end cable adjuster of dia. 9mm and 2.4m long aircraft cable of 1/16” dia. Hanger Wire Attachment to Structure: Attach the gripper structure anchor to the structure with an appropriate fastener (1/4"-20 Threading) that will carry the full weight of the blades. Insert the end of the cable into the gripper anchor cap. Screw the gripper anchor cap completely into the gripper structure anchor. Insert Suspension Cables: The panel is to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster. The height & level of the panels can be adjusted using the bottom end cable adjusters. Suspension of Blade: Locate the two factory fitted female inserts on the blades. Suspend the Blades by screwing the bottom end of the cable adjuster into the female inserts. Installation should be carried out as per recommended procedure. Make-Armstrong/Equivalent MR
10
12500
125000
... More
Providing & Fixing of Forbo Flotex color/linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per Sqm , Fire Test EN-13501, Appearence Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing ,anti allergic cetrtified by British allergy foundation, anti static, stain resistant, thickness 4.3 mm and approximate weight of 4.5 k.g./sqm of roll form with acoustic sound impact 17dB. Flotex to be installed over cement based smooth level hard flooring( Made in United Kingdom). The carpet should be laid complete including SS edge profile at door. MR
216.97
7150
1551335.5
... More
Providing and fixing of Engineered Wood flooring 15MM Thick range Solitary collection of Use 23/32 (Heavy Domestic/Domestic) with a Surface Abrasion Resistance of class AC3 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density 850 Kg/M3) of plank having Uni fit locking arrangement (lock strength 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge)Make-Mikasa/Luxe/Armstrong. all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge. Make-Armstrong,Mikasa,Luxe Equivalent MR
120.2
10123
1216784.6
... More
Providing and Fixing Channeled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density particle board substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminium splines using clips. as per the approved design as approved by the Architect/ Engineer -in-Charge. Make-Armstrong/Equivalent MR
462.07
7200
3326904
... More
Providing and supplying Acoustical Wall Paneling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire -resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size as required providing a minimum sound absorption level to be affixed to wall using Wall panel impalers and construction adhesives as per the instructions laid down by the installer as per the approved design as approved by the Architect/ Engineer -in-Charge. MR
486.28
9000
4376520
... More
Providing & Making & Fixing of Commercial Wall Panneling made with Aluminium Section of 2"x1" @ 2'CC frame work cladded with 12MM Ply/HDHMR (Archidply/Equivalent), as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
788.41
4318
3404354.38
... More
Providing & Making & Fixing of Commercial Wall Partition made with Aluminium Section of 1.75"x1.75" @ 2'CC frame work cladded with 8/9MM Ply/HDHMR (Archidply/Equivalent), as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
37.8
6565
248157
... More
Providing & Making & Fixing of Floor Panneling with 16MM Water Proof Board By Repairing & Refixing The Existing Commercial Under Lay Wooden Framework complete as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. MR
120.2
3750
450750
... More
Providing & Making & Fixing of Veneered Wall Paneling with 4MM Veneer complete Melamine Polish, as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
68.73
7415
509632.95
... More
Providing & Making & Fixing of Laminated Wall Paneling with 5.5MM MDF & 1MM Laminate complete Gove Polish, as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
90.96
2419
220032.24
... More
Providing & Making & Fixing of Double Skin 19MM Door (Archidply/Equivalent) Veneered Both Side & Melamine Polished complete with Floor Spring, Top & Bottom Pivot, Lock Body & Handle all complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
18
37500
675000
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR(13.80)
3669.78
123
452373.78
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR(13.48.1)
3669.78
153
561513.04
... More
Dismantalling & then Refixing of Old Auditorium Chair by fabric Reupholstering , all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge MR
450
3500
1575000
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR(10.28)
24.78
610
15119.76
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR(11.41.2)
61
1227
74856.15
... More
Grouting the joints of flooring tiles having joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. DSR(11.48.2) DSR(15.12.2)
61
244
14892.54
... More
Providing & Making & Fixing of 12MM MDF Melamine Polished Skirting as per approved drawing & direction of Engineer incharge. MR MR
95.35
500
47675
... More
Providing & Fixing of Lazer Cutted Acrylic Letters Pasted on Acrylic Sheet of MERCURY AUDITORIUM LOGO & Name with Racce, Designing, Transportation, Installation & Labour complete as per desigh. MR MR
2
25000
50000
... More
Providing & Fixing of 6MM Thick High Pressure Exterior compact Laminate made out of thermosetting resign treated Kraft as core material and design paper as a finish surface. Compact laminates should be resistance to water immersion through permissible increase on thickness and mass 0.60% and board should have density 1.35kg/cm3 . Compact should be flame retardant fulfilled the criteria of under BS-476/97 and EN438-6 with classification of BS1D0 standard property with Anti-bacterial & Anti-termite (under JIS Z2801:2000 certification), Chemical resistance, Scratch resistant ,flame resistance, weather & climatic shock resistance(The manufacturer should provide10 years warranty certification on any manufacturing and moisture related defects.), and fulfilled the criteria of Green Guard Gold certification and manufactured under EN438-2&3:2005 standard complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. MR
87.61
7500
657075
... More
ELECTRICAL WORK
-
-
-
... More
Wireman for Dismentalling Old Electrical Circuit & Electrical Fittings & Fixtures DSR(1001)
20
806
16120
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit ,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. One light point with 5 Amp. switch. Group C DSR(1.10.3) * 0.789
20
1157
23149.2
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. DSR(1.31) * 0.789
25
376
9408.75
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. DSR(1.32) * 0.789
25
462
11558.75
... More
Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required. 2x1.5 sq mm +1x1.5 sqmm earth wire. DSR(1.14.1) * 0.789
1645.1
183
302435.18
... More
Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required. 2x2.5 sq mm +1x2.5 sqmm earth wire. DSR(1.14.2) * 0.789
364.5
216
79089.21
... More
Providing Drawing Connecting And Testing Of Enhanced Categoey 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specifide 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable) DSR(1.53.1) * 0.789
100
44
4497
... More
Supply and fixing of ISI marked (IS : 9537 part-2 with latest ammendments) ,PVC Conduit (the class of pipe in concealed / exposed system in wall, ceiling or on floor including cutting of brick work, laying of conduit and fixing and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threading of conduit and providing necessary sockets, bends, tees, junction boxes of required sizes and chuck nuts as directed at site by the engineer-in-charge with supply of all material labour and T & P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as required. 20MM DSR(1.21.1) * 0.789
100
100
10099
... More
Supply and fixing of ISI marked (IS : 9537 part-2 with latest ammendments) ,PVC Conduit (the class of pipe in concealed / exposed system in wall, ceiling or on floor including cutting of brick work, laying of conduit and fixing and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threading of conduit and providing necessary sockets, bends, tees, junction boxes of required sizes and chuck nuts as directed at site by the engineer-in-charge with supply of all material labour and T & P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as required. 25MM. DSR(1.21.2) * 0.789
50
114
5720.5
... More
Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet M.R
4
1371
5484
... More
Supplying & fixing ceiling rose on the existing junction/ wooden box including connection etc. as required. DSR(1.33) * 0.789
18
68
1235.52
... More
Blank plate for modular plate type switch boards wherever required. DSR(1.26) * 0.789
10
31
315.6
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole DSR(2.10.1) * 0.789
67
201
13532.66
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A DSR(2.13.2) * 0.789
1
815
815.83
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100A DSR(2.13.3) * 0.789
1
968
968.1
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 4 way (4 + 12), Double door DSR(2.5.1) * 0.789
1
5926
5926.97
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 8 way (4 + 24), Double door DSR(2.5.2) * 0.789
1
8020
8020.19
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 12 way (4 + 36), Double door DSR(2.5.3) * 0.789
2
10125
20250.48
... More
Supply & Fixing of LED Profile Light Complete as per drawing & specification as approved by the Architect/ Engineer -in-Charge M.R
147.5
1151
169772.5
... More
Supply & Fixing of LED Profile Light Driver Complete as per drawing & specification as approved by the Architect/ Engineer -in-Charge M.R
30
3795
113850
... More
Supply & Fixing of LED Step Mounting Profile Light all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips. M.R
94.26
6639
625792.14
... More
Supply & Fixing of LED Step Mounting Profile Light Driver all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips. M.R
19
3795
72105
... More
Supply & Fixing of 12.3Watt LED Spot Light Having 24Degree Fitting & Phase Cut Dimmable Drivers (Current Selection CC) IP 20 all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM). M.R
180
4806
865080
... More
Supply and fixing of 250mm Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent M.R
2
2193
4386
... More
Supply & Fixing of 36Watt to 46 Watt indoor Recess mounting LED square fitting for Armstrong ceiling having powder coated die cast aluminium housing body with extended heat sink and diffuser of special polycarbonate meterial and driver set complete in all respect. M.R
20
4880
97600
... More
Supply & Fixing of DG/S2.64.1.1 DALI Gateway, Basic, 2-fold, MDRC slaves. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI slave (2x64), with groups (2x16), together in broadcast or per scenes (2x16). Extensive fault and error messages are available Self-contained emergency converter (2x64) acc. EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered. Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change. all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM) M.R
1
224908
224908
... More
Supply & Fixing of SV/S30.640.3.1 Power Supply, 640 mA, MDRC KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke. The voltage output is short-circuit and overload protected. The two-color LED indicates device output status. Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke). With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz. Make-LEDADVANCE (OSRAM) M.R
1
114434
114434
... More
S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release. M.R
2
10615
21230
... More
S&F of 160 Amp 4 pole MCCB (25 KA) Thermal Magnetic release. M.R
1
12660
12660
... More
S&F of 50 Amp to 63 Amp. SPMCB (10KA). M.R
1
530
530
... More
S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve. M.R
2
740
1480
... More
S&F of 40 Amp. DP MCB (10 KA) C Curve. M.R
1
1180
1180
... More
S&F of 63 Amp. DP MCB (10 KA). M.R
1
1180
1180
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. M.R
4
1350
5400
... More
Providing & Fixing of Olivia smart dc wall fan with 18 blades patented design, mute technique, remote controlled, double ring spiral wind, smart control and energy efficient complete in all respect, as directed at site by Engineer in charge. M.R
18
18117
326106
... More
Supply & Fixing of 36Watt LED Spot Light Having 24Degree Fitting & Phase Cut Dimmable Drivers (Current Selection CC) IP 20 all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM). M.R
20
14927
298540
... More
Supply & Fixing of Acti 9 distribution board 4 Tier 56 Modules Double Door without MCB complete in all respect, as directed at site by Engineer in charge. M.R
1
11906
11906
... More
Supply & Fixing of 25A DP 100MA Optipro RCCB-INDOASIAN, complete in all respect, as directed at site by Engineer in charge. M.R
1
3420
3420
... More
STAGE LIGHTING SYSTEM WORK
-
-
-
... More
Supply, Installation, Testing & Commissioning of Hi Resolution Professional grade RGB 105 watt All weather Led Par Standard Output 15* -30* with a diffuser. Dimming 0-100%. Power consumption less than 100 watt. IP 65. Passive Cooling w/o Fan Make: Osram./A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
8
25013
200104
... More
Supply, Installation, Testing & Commissioning of Hi resolution Warm White All weather 105watt Led Par . Standard Output 15*-30*. Dimming 0-100%. Power Consumption less than 100w Make: Osram /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
8
28405
227240
... More
Supply, Installation, Testing & Commissioning of Kreios LED Profile WW 80 watt Precise Focus; Very High Light Output; ComPact design; Flicker Free Adjustable Dimming Frequency( Via pulse Width Modultaion)Strobe & Pulse effects;7390 lumen;3000K Color Temp Make Osram /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
2
110975
221950
... More
Supply, Installation, Testing & Commissioning of Kreios LED Fresnel Light 200 watt Precise Focus ; Very High Ligt Output Compact Design ; Flicker Free adjustable Dimming Frequency Make: OSRAM/ A-PRO, all complete as per drawing and specification and direction of engineer incharge. M.R
2
110975
221950
... More
Supply, Installation, Testing & Commissioning of Moving Head Sharpy Light 330 watt ; 20 channel Multi colour Multi Gobo Make: BSM Star /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
2
74980
149960
... More
Supply, Installation, Testing & Commissioning of Smoke Generator 1500 watt Dmx Controlled . Make: BSM Star, all complete as per drawing and specification and direction of engineer incharge. M.R
1
33350
33350
... More
Supply, Installation, Testing & Commissioning of Scene Selector Programming Conmtrller Console For the above Lighting Make: BSM Star Mini Pearl, all complete as per drawing and specification and direction of engineer incharge. M.R
1
85388
85388
... More
Supply, Installation, Testing & Commissioning of 1 in 8 out Power Splitter Make: BSMStar/ NS, all complete as per drawing and specification and direction of engineer incharge. M.R
1
21563
21563
... More
Supply, Installation, Testing & Commissioning of Signal Cables/ Power Cables & Interconnects Make: Reputed, all complete as per drawing and specification and direction of engineer incharge. M.R
1
287500
287500
... More
Supply, Installation, Testing & Commissioning of Custom Clamps & accessories Make: Customized, all complete as per drawing and specification and direction of engineer incharge. M.R
1
85388
85388
... More
Supply, Installation, Testing & Commissioning of Customised Bar with hanging accessories, all complete as per drawing and specification and direction of engineer incharge. M.R
1
47438
47438
... More
Supply, Installation, Testing & Commissioning of Customised Frame For Stage Fittings, all complete as per drawing and specification and direction of engineer incharge. M.R
1
6670
6670
... More
Supply, Installation, Testing & Commissioning of Electrical Points 86 points, all complete as per drawing and specification and direction of engineer incharge. M.R
29
2875
83375
... More
Supply, Installation, Testing & Commissioning of Smoke Liquid BSM Star, all complete as per drawing and specification and direction of engineer incharge. M.R
50
575
28750
... More
Supply, Installation, Testing & Commissioning of LED Blinder Lihght DMX Controlled 200 watt, Make-A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
4
60375
241500
... More
Supply, Installation, Testing & Commissioning of Customised Mororized Hanging Lighting Bar Made of MS Frame Work & GI Hangers, all complete as per drawing and specification and direction of engineer incharge. M.R
1
212750
212750
... More
AIR-CONDITIONING DUCTING SYSTEM WORK
-
-
-
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 0.63 mm (24 SWG) galvanized sheet steel M.R
30
1189
35685
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 0.80 mm (22 SWG) galvanized sheet steel M.R
30
1365
40950
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 1.00 mm (20 SWG) galvanized sheet steel M.R
30
1755
52650
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 1.25 mm (18 SWG) galvanized sheet steel M.R
30
2080
62400
... More
Supplying & Fixing of powder coated aluminium section
supply air diffusers/ grill with fixed air distribution grid, with MS Valume control damper for supply air M.R
8
15950
127600
... More
Supplying & Fixing of powder coated aluminium section
supply air diffusers/ grill with fixed air distribution grid, without MS Valume control damper for Returm air M.R
8
12100
96800
... More
Supply & Fixing of Eye ball jet diffuser of following dia, 300 mm M.R
4
4160
16640
... More
Supply & Fixing of Eye ball jet diffuser of following dia, 400 mm M.R
10
5850
58500
... More
Supply & Fixing of Insulated Flexible duct for Round insulated duct M.R
15
780
11700
... More
Supply & Fixing of MS fire dampers with fusible links M.R
2
15400
30800
... More
Supply & Fixing of Alluminium fresh air dampers with louvers and bird screen M.R
2
4950
9900
... More
Supply & Fixing of Fire retardent Canvass Connection M.R
2
7150
14300
... More
Supplying & Fixing of External thermal insulation on ducts with Closed Cell Elastomeric Nitrile Rubber Foam (Class - O, Fire retardent) of density 40-60 Kg/m³, 13 mm thick M.R
400
1150
460000
... More
Supplying & Fixing accaustic lining with 25mm thick resin bonded fiber glass of density 32 kg/cum on the inner side of ducting including flexing RP tissue paper
finished with 30 G perforted aluminium sheet. M.R
60
1050
63000
... More
MARS AUDITORIUM
-
-
-
... More
INTERIOR WORK
-
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area beyond 3 sqm. DSR(15.12.2)
9
397
3574.35
... More
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 60 metres lead. DSR(15.31)
1075.84
165
178385.03
... More
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm DSR(15.39.2)
1222.34
61
75076.12
... More
Dismantling of Carpet layed in floors & stairs of Auditorium etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. MR
1109.15
50
55457.5
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR(15.60)
200
208
41702
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once for every month for duration of scaffolding (Maximum 3 Months). DSR(14.72)
2250
267
601200
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% DSR(2.34.1)
200
185
37088
... More
Treatment of existing Masonry using chemical imulsion @ 1 litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand) to the full depth of hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. DSR(2.35.4.1)
580.92
33
19733.85
... More
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. DSR(2.35.5) 7
418.32
220
92427.8
... More
Providing & Fixing of Suspended Gyptone Sixto 63 Ceiling includes 20x28x30x0.5mm Gypserra™ Perimeter Channel{Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is fixed along the perimeter of existingwall with the help of HILTI HPS - 1 (6x40) impact anchor at 600mm centres. 25x10x0.5mm Gypserra™Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing itto 27x37x25x1.6mm Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM (IS277)}. SoffitCleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull outload- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. 15x45x15x0.9mmGypserra™Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } isfixed to the Gypserra™Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As perEN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbonsteel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.}. 80x26x0.5mm Gypserra™CeilingSection {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Gypserra™Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help ofGyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42),46-48HRC,Finish-Zincplating 4-6 micron} and in direction perpendicular to the Intermediate channel at 600mm c/c. Single layer12.5mm Gyproc Gyptone Sixto 63 board (meets requirement of specification mentioned under DAR no.12.45.4 in Delhi Schedule of rates (DSR)), of size 1200x2400mm having four tapered edges, 15%perforation area of board & hole size of 12mm hexagon shape , having 8 perforation sets per board andeach set of size (474x474)mm, 64mm border and 128mm center band, backed with acoustic tissue , havingNRC values 0.6, is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel ENISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres. For higher NRC value, Resinbonded glass wool of 24kg/M3 and 50mm thick can be placed on top of the board,(refer Gyptone Sixto 63-PDS for NRC values). Finally all tapered edges of the boards are to be jointed and finished so as to have aflush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTMC475), Gyproc® Joint Paper tape. Serrated steel section has effective thickness of 2T (2xdepth), better loadcarrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as comparedto plain steel section. MR
345.99
3765
1302652.35
... More
Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 27mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64MM diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting. 12.50mm thick tapered edge gypsum board. DSR(12.45.1)
72.43
1071
77573.98
... More
Providing & Fixing of Armstrong Armstrong Fibre Glass Acoustical Suspended Ceiling System with 15mm thick Optra Microlook 90 Edge Tiles with Armstrong Suprafine 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95(Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, Light Reflectance ≥88% as per ASTM E-1477, Colour Black ,Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 15mm Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour BLACK having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 8.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill, as per the approved design as approved by the Architect/ Engineer -in-Charge MR MR
333.43
3245
1081980.35
... More
Providing & Fixing of Armstrong Suspended Ceiling System with Armstrong H4988 BP4988S DUNE Bev. Teg. 600x600x15mm (Microlook) EDGE TILES WITH ARMSTRONG Silhouette Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm ,and 600x1200x15mm suitable for Green Building application, with Recycled content of 66% GW.The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and a load carrying capacity of 10 Kgs/M2.The Tile & Grid system used together, all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge MR
67.5
2240
151200
... More
Providing and Fixing Armstrong or equivalent SoundScapes - Acoustical clouds which are 30 mm thick, flat glass fiber panels with Humidity Resistance RH 90% & Recycled Content of minimum 30%, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90% or in the color specified by the Architect / Engineer incharge (White/ Shell/ Tangerine/ Cranberry/ Moss/ Kiwi/ Reef/ Lagoon/ RAL co-ordinated*) . The size and sound absorption details are as below:
Sr. No. Shape Nominal Size Sound Absorption – Metric Sabin
1. Square 1200x1200mm 2.48
2. Convex 1200x1200mm 2.28
3. Concave 1200x1200mm 1.94
4. Circle 1200x1200mm 2.12
5. Hexagon 1200x1200mm 1.61
6. Trapezoid 1200x1200mm 2.15
7. Left Parallelogram 1200x1200mm 2.15
8. Right Parallelogram 1200x1200mm 2.15
The back of each panel to have embedded square frame bracket system of 610x610mm in which provisions are already made for integration of installation system for suspension of individual or grouped panels. INSTALLATION: The panels to be suspended individually using the SoundScapes Deck hanging kit. Each kit to consist of gripper structure anchors with an outer diameter of 16mm and height 23mm, aircraft cables of 1.5mm dia 2.44 LM in length and bottom end cable adjusters of 8.9mm outer diameter. Each panel to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster which are screwed in the 4 corners of the frame bracket system. The height & level of the panels can be adjusted using the bottom end cable adjusters. APPROVED MAKE - Armstrong/ Saint Gobain/ SAS MR
10
24495
244950
... More
Providing & Fixing of Forbo Flotex color/linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per Sqm , Fire Test EN-13501, Appearence Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing ,anti allergic cetrtified by British allergy foundation, anti static, stain resistant, thickness 4.3 mm and approximate weight of 4.5 k.g./sqm of roll form with acoustic sound impact 17dB. Flotex to be installed over cement based smooth level hard flooring( Made in United Kingdom). The carpet should be laid complete including SS edge profile at door. MR
1000.83
7150
7155934.5
... More
Providing and fixing of Engineered Wood flooring 15MM Thick range Solitary collection of Use 23/32 (Heavy Domestic/Domestic) with a Surface Abrasion Resistance of class AC3 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density 850 Kg/M3) of plank having Uni fit locking arrangement (lock strength 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge)Make-Mikasa/Luxe/Armstrong. all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge. Make-Armstrong,Mikasa,Luxe Equivalent MR
164.74
10123
1667663.02
... More
Providing and Fixing Channeled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density particle board substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminium splines using clips. as per the approved design as approved by the Architect/ Engineer -in-Charge. Make-Armstrong/Equivalent MR
192.27
7200
1384344
... More
Providing and supplying Acoustical Wall Paneling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire -resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size as required providing a minimum sound absorption level to be affixed to wall using Wall panel impalers and construction adhesives as per the instructions laid down by the installer as per the approved design as approved by the Architect/ Engineer -in-Charge. MR
739.44
9000
6654960
... More
Providing & Making & Fixing of Commercial Wall Panneling made with Aluminium Section of 2"x1" @ 2'CC frame work cladded with 12MM Ply/HDHMR (Archidply/Equivalent), as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
1216.24
4318
5251724.32
... More
Providing & Making & Fixing of Commercial Wall Partition made with Aluminium Section of 1.75"x1.75" @ 2'CC frame work cladded with 8/9MM Ply/HDHMR (Archidply/Equivalent), as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
37.8
6565
248157
... More
Providing & Making & Fixing of Floor Panneling with 16MM Water Proof Board By Repairing & Refixing The Existing Commercial Under Lay Wooden Framework complete as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. MR
164.74
3750
617775
... More
Providing & Making & Fixing of Veneered Wall Paneling with 4MM Veneer complete Melamine Polish, as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
68.73
7415
509632.95
... More
Providing & Making & Fixing of Laminated Wall Paneling with 5.5MM MDF & 1MM Laminate complete Gove Polish, as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
46.71
2419
112991.49
... More
Providing & Making & Fixing of Double Skin 19MM Door (Archidply/Equivalent) Veneered Both Side & Melamine Polished complete with Floor Spring, Top & Bottom Pivot, Lock Body & Handle all complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction of engineer incharge. MR
30.96
37500
1161000
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR(13.80)
4694.96
123
578747.72
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR(13.48.1)
4694.96
153
718375.83
... More
Dismantalling & then Refixing of Old Auditorium Chair by fabric Reupholstering , all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge MR
600
3500
2100000
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR(10.28)
77.78
610
47458.24
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR(11.41.2)
61
1227
74856.15
... More
Grouting the joints of flooring tiles having joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. DSR(11.48.2) DSR(15.12.2)
61
244
14892.54
... More
Providing & Making & Fixing of 12MM MDF Melamine Polished Skirting as per approved drawing & direction of Engineer incharge. MR MR
170.16
500
85080
... More
Providing & Fixing of Lazer Cutted Acrylic Letters Pasted on Acrylic Sheet of JUPITER AUDITORIUM LOGO & Name with Racce, Designing, Transportation, Installation & Labour complete as per desigh. MR MR
2
25000
50000
... More
Providing & Fixing of 6MM Thick High Pressure Exterior compact Laminate made out of thermosetting resign treated Kraft as core material and design paper as a finish surface. Compact laminates should be resistance to water immersion through permissible increase on thickness and mass 0.60% and board should have density 1.35kg/cm3 . Compact should be flame retardant fulfilled the criteria of under BS-476/97 and EN438-6 with classification of BS1D0 standard property with Anti-bacterial & Anti-termite (under JIS Z2801:2000 certification), Chemical resistance, Scratch resistant ,flame resistance, weather & climatic shock resistance(The manufacturer should provide10 years warranty certification on any manufacturing and moisture related defects.), and fulfilled the criteria of Green Guard Gold certification and manufactured under EN438-2&3:2005 standard complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. MR
88.49
7500
663675
... More
ELECTRICAL WORK
-
-
-
... More
Wireman for Dismentalling Old Electrical Circuit & Electrical Fittings & Fixtures DSR(1001)
25
806
20150
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit ,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. One light point with 5 Amp. switch. Group C DSR(1.10.3) * 0.789
24
1157
27779.04
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. DSR(1.31) * 0.789
30
376
11290.5
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. DSR(1.32) * 0.789
30
462
13870.5
... More
Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required. 2x1.5 sq mm +1x1.5 sqmm earth wire. DSR(1.14.1) * 0.789
2524.74
183
464148.2
... More
Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required. 2x2.5 sq mm +1x2.5 sqmm earth wire. DSR(1.14.2) * 0.789
428.2
216
92910.84
... More
Providing Drawing Connecting And Testing Of Enhanced Categoey 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specifide 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable) DSR(1.53.1) * 0.789
100
44
4497
... More
Supply and fixing of ISI marked (IS : 9537 part-2 with latest ammendments) ,PVC Conduit (the class of pipe in concealed / exposed system in wall, ceiling or on floor including cutting of brick work, laying of conduit and fixing and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threading of conduit and providing necessary sockets, bends, tees, junction boxes of required sizes and chuck nuts as directed at site by the engineer-in-charge with supply of all material labour and T & P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as required. 20MM DSR(1.21.1) * 0.789
100
100
10099
... More
Supply and fixing of ISI marked (IS : 9537 part-2 with latest ammendments) ,PVC Conduit (the class of pipe in concealed / exposed system in wall, ceiling or on floor including cutting of brick work, laying of conduit and fixing and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threading of conduit and providing necessary sockets, bends, tees, junction boxes of required sizes and chuck nuts as directed at site by the engineer-in-charge with supply of all material labour and T & P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as required. 25MM. DSR(1.21.2) * 0.789
50
114
5720.5
... More
Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet M.R
4
1371
5484
... More
Supplying & fixing ceiling rose on the existing junction/ wooden box including connection etc. as required. DSR(1.33) * 0.789
22
68
1510.08
... More
Blank plate for modular plate type switch boards wherever required. DSR(1.26) * 0.789
10
31
315.6
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole DSR(2.10.1) * 0.789
67
201
13532.66
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A DSR(2.13.2) * 0.789
1
815
815.83
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100A DSR(2.13.3) * 0.789
1
968
968.1
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 4 way (4 + 12), Double door DSR(2.5.1) * 0.789
1
5926
5926.97
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 8 way (4 + 24), Double door DSR(2.5.2) * 0.789
1
8020
8020.19
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. 12 way (4 + 36), Double door DSR(2.5.3) * 0.789
2
10125
20250.48
... More
Supply & Fixing of LED Profile Light Complete as per drawing & specification as approved by the Architect/ Engineer -in-Charge M.R
194.5
1151
223869.5
... More
Supply & Fixing of LED Profile Light Driver Complete as per drawing & specification as approved by the Architect/ Engineer -in-Charge M.R
39
3795
148005
... More
Supply & Fixing of LED Step Mounting Profile Light all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips. M.R
63
6639
418257
... More
Supply & Fixing of LED Step Mounting Profile Light Driver all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips. M.R
63
3795
239085
... More
Supply & Fixing of 12.3Watt LED Spot Light Having 24Degree Fitting & Phase Cut Dimmable Drivers (Current Selection CC) IP 20 all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM). M.R
240
4806
1153440
... More
Supply and fixing of 250mm Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent M.R
2
2193
4386
... More
Supply & Fixing of 36Watt to 46 Watt indoor Recess mounting LED square fitting for Armstrong ceiling having powder coated die cast aluminium housing body with extended heat sink and diffuser of special polycarbonate meterial and driver set complete in all respect. M.R
60
4880
292800
... More
Supply & Fixing of DG/S2.64.1.1 DALI Gateway, Basic, 2-fold, MDRC slaves. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI slave (2x64), with groups (2x16), together in broadcast or per scenes (2x16). Extensive fault and error messages are available Self-contained emergency converter (2x64) acc. EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered. Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change. all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM) M.R
2
224908
449816
... More
Supply & Fixing of SV/S30.640.3.1 Power Supply, 640 mA, MDRC KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke. The voltage output is short-circuit and overload protected. The two-color LED indicates device output status. Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke). With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz. Make-LEDADVANCE (OSRAM) M.R
2
114434
228868
... More
S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release. M.R
2
10615
21230
... More
S&F of 160 Amp 4 pole MCCB (25 KA) Thermal Magnetic release. M.R
2
12660
25320
... More
S&F of 50 Amp to 63 Amp. SPMCB (10KA). M.R
1
530
530
... More
S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve. M.R
2
740
1480
... More
S&F of 40 Amp. DP MCB (10 KA) C Curve. M.R
1
1180
1180
... More
S&F of 63 Amp. DP MCB (10 KA). M.R
1
1180
1180
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. M.R
12
1350
16200
... More
Providing & Fixing of Olivia smart dc wall fan with 18 blades patented design, mute technique, remote controlled, double ring spiral wind, smart control and energy efficient complete in all respect, as directed at site by Engineer in charge. M.R
22
18117
398574
... More
Supply & Fixing of 36Watt LED Spot Light Having 24Degree Fitting & Phase Cut Dimmable Drivers (Current Selection CC) IP 20 all complete as per drawing and specification and direction of engineer incharge. Make-LEDADVANCE (OSRAM). M.R
26
14927
388102
... More
Supply & Fixing of Acti 9 distribution board 4 Tier 56 Modules Double Door without MCB complete in all respect, as directed at site by Engineer in charge. M.R
1
11906
11906
... More
Supply & Fixing of 25A DP 100MA Optipro RCCB-INDOASIAN, complete in all respect, as directed at site by Engineer in charge. M.R
1
3420
3420
... More
STAGE LIGHTING SYSTEM WORK
-
-
-
... More
Supply, Installation, Testing & Commissioning of Hi Resolution Professional grade RGB 105 watt All weather Led Par Standard Output 15* -30* with a diffuser. Dimming 0-100%. Power consumption less than 100 watt. IP 65. Passive Cooling w/o Fan Make: Osram./A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
8
25013
200104
... More
Supply, Installation, Testing & Commissioning of Hi resolution Warm White All weather 105watt Led Par . Standard Output 15*-30*. Dimming 0-100%. Power Consumption less than 100w Make: Osram /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
8
28405
227240
... More
Supply, Installation, Testing & Commissioning of Kreios LED Profile WW 80 watt Precise Focus; Very High Light Output; ComPact design; Flicker Free Adjustable Dimming Frequency( Via pulse Width Modultaion)Strobe & Pulse effects;7390 lumen;3000K Color Temp Make Osram /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
2
110975
221950
... More
Supply, Installation, Testing & Commissioning of Kreios LED Fresnel Light 200 watt Precise Focus ; Very High Ligt Output Compact Design ; Flicker Free adjustable Dimming Frequency Make: OSRAM/ A-PRO, all complete as per drawing and specification and direction of engineer incharge. M.R
2
110975
221950
... More
Supply, Installation, Testing & Commissioning of Moving Head Sharpy Light 330 watt ; 20 channel Multi colour Multi Gobo Make: BSM Star /A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
2
74980
149960
... More
Supply, Installation, Testing & Commissioning of Smoke Generator 1500 watt Dmx Controlled . Make: BSM Star, all complete as per drawing and specification and direction of engineer incharge. M.R
1
33350
33350
... More
Supply, Installation, Testing & Commissioning of Scene Selector Programming Conmtrller Console For the above Lighting Make: BSM Star Mini Pearl, all complete as per drawing and specification and direction of engineer incharge. M.R
1
85388
85388
... More
Supply, Installation, Testing & Commissioning of 1 in 8 out Power Splitter Make: BSMStar/ NS, all complete as per drawing and specification and direction of engineer incharge. M.R
2
21563
43126
... More
Supply, Installation, Testing & Commissioning of Signal Cables/ Power Cables & Interconnects Make: Reputed, all complete as per drawing and specification and direction of engineer incharge. M.R
1
287500
287500
... More
Supply, Installation, Testing & Commissioning of Custom Clamps & accessories Make: Customized, all complete as per drawing and specification and direction of engineer incharge. M.R
1
85388
85388
... More
Supply, Installation, Testing & Commissioning of Customised Bar with hanging accessories, all complete as per drawing and specification and direction of engineer incharge. M.R
2
47438
94876
... More
Supply, Installation, Testing & Commissioning of Customised Frame For Stage Fittings, all complete as per drawing and specification and direction of engineer incharge. M.R
2
6670
13340
... More
Supply, Installation, Testing & Commissioning of Electrical Points 86 points, all complete as per drawing and specification and direction of engineer incharge. M.R
32
2875
92000
... More
Supply, Installation, Testing & Commissioning of Smoke Liquid BSM Star, all complete as per drawing and specification and direction of engineer incharge. M.R
50
575
28750
... More
Supply, Installation, Testing & Commissioning of LED Blinder Lihght DMX Controlled 200 watt, Make-A-Pro, all complete as per drawing and specification and direction of engineer incharge. M.R
4
60375
241500
... More
Supply, Installation, Testing & Commissioning of Customised Mororized Hanging Lighting Bar Made of MS Frame Work & GI Hangers, all complete as per drawing and specification and direction of engineer incharge. M.R
1
212750
212750
... More
AIR-CONDITIONING DUCTING SYSTEM WORK
-
-
-
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 0.63 mm (24 SWG) galvanized sheet steel M.R
40
1189
47580
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 0.80 mm (22 SWG) galvanized sheet steel M.R
40
1365
54600
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 1.00 mm (20 SWG) galvanized sheet steel M.R
40
1755
70200
... More
Supplying, Installing, Testing & Commissioning of Galvanized sheet steel ( GSS) ducting of following thickness including necessary supports, hangers, nut, bolts, gasket, split dampers, 1.25 mm (18 SWG) galvanized sheet steel M.R
40
2080
83200
... More
Supplying & Fixing of powder coated aluminium section supply air diffusers/ grill with fixed air distribution grid, with MS Valume control damper for supply air M.R
10
15950
159500
... More
Supplying & Fixing of powder coated aluminium section supply air diffusers/ grill with fixed air distribution grid, without MS Valume control damper for Returm air M.R
10
12100
121000
... More
Supply & Fixing of Eye ball jet diffuser of following dia, 300 mm M.R
4
4160
16640
... More
Supply & Fixing of Eye ball jet diffuser of following dia, 400 mm M.R
15
5850
87750
... More
Supply & Fixing of Insulated Flexible duct for Round insulated duct M.R
20
780
15600
... More
Supply & Fixing of MS fire dampers with fusible links M.R
2
15400
30800
... More
Supply & Fixing of Alluminium fresh air dampers with louvers and bird screen M.R
2
4950
9900
... More
Supply & Fixing of Fire retardent Canvass Connection M.R
2
7150
14300
... More
Supplying & Fixing of External thermal insulation on ducts with Closed Cell Elastomeric Nitrile Rubber Foam (Class - O, Fire retardent) of density 40-60 Kg/m³, 13 mm thick M.R
560
1150
644000
... More
Supplying & Fixing accaustic lining with 25mm thick resin bonded fiber glass of density 32 kg/cum on the inner side of ducting including flexing RP tissue paper finished with 30 G perforted aluminium sheet. M.R
80
1050
84000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%