Hapur Pilakhua Development Authority Tender

Earthwork in cutting or in embankment in ordinary soil. 2019 253A excavation to be done from regular pits not exceeding 1/2 M. in depth and work embankment to be in 20 cm layer including ramming and dressing the surface to required levels and slopes and also including 1.5M lifts and lead up to 8 km. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30M distance as directed bythe Engineer-in-charge, excluding the cost of royalty of earth.

Construction of un-reinforced plain cementconcrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriateweigh batcher using approved mix design, laid in approved fixed side formwork (steel) channel, laying and fixing of 125 micronthick polythene film, wedges, steel platesincluding levelling the formwork as perdrawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying debonding strips, primer, sealant, near approaches bridge/culvert construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Floter-Trimix Flooring Cum and to Machine. Technical pecification Clause 1501.

Previding & Laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material lo ste carriage OMC in mechanical mix plant of mixed material by lipper lo s laying in uniform layer with paver in sub basebase coarse on well prepared surface and compacting with vibratory roller to achieve the desired density, MORT&H-406

M.S (Tor steel or plain) work in plain work such as RCC or RB (SI.No.504 work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire.