Hapur Pilakhua Development Authority Tender

Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (300 feet)

4cm thick 1:2-4 plain Cement Concrete floor with cement, approved coarse sand and 20m graded approved stone grit finished with 3mm (1/8) floating coat of neat cement of cement and marble dust into 5:1 as specified including removing any over lapping mortar at joints of the panels if any and giving them a uniform Enish, Including supply of all materials, labour, T&P etc. required for proper completion of the work with out base concrete.

12mm thick plaster with cement and coarse sand in 134 over brick work minimum thickness not to be less than 10mm thick including supply of 2022.584(a) all materials, labour and T&P etc.required for proper completion of the work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 15: 15622, of approved make, in all colours and DSR-11.41.2 shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc, complete

Providing and foding lst quality ceramic glazed wall tiles conforming to 15: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 13 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sam, including painting in white cement mixed with pigment of matching shade complete

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) lald and jointed with cement slurry and pointing with white DOR-11.56.1 cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade: 13.45.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm)

Providing & fixing of hold fast for chaukhats of doors and windows.

Providing and fixing Si marked oxidised M.S. tower belt black finish (Barrel type) with necessary screws etc. complete 9a) 250mmx10mm

Providing and fixing Si marked oxidised M.S.handles conforming to is 4992 with necessary screws etc. complete 125 mm

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as perASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length(shape& size according to uPVC profile), ,uPVC extruded glazing beads of appropriate dimension,EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.

Part B :-- WATER SUPPLY & SANITATY WORKS

Providing and fixing water closet squatting pan (Europen type W.C. pan ) with white plastic seat and 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing &fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P.brass spreaders with brass unions and G.I. clamp comp. including painting of fittings and brackets, cutting and making good the walls.one urinal basin with 5 litre white P.V.C. automatic flushing cistrn.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110 mm diameter

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. a) 110mm

Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions.

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, cowels, clamps, hangers, rubber rings, clean outs etc. fixing at wall / ceiling / floor level supported by clamp & hangers etc. inside duct / suspended from floor under false ceiling for proper completion of the work. The rubber ring shall confirm to IS:5382. (Make : Supreme / Finolex /Prince) (Pipe support : Intellotech / Easyflex / Chilly) Bend 110 mm

75 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 18.8.2 20 mm nominal outer dia Pipes

Providing and fixing rigid PVC Nahani trap of self cleaning design with complete i/c cost of cutting and making good the walls and floors. 2) 110 mm inlet and 110 mm outlet.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

18.58 Providing and fixing PTMT grating of approved quality and colour.18.58.1 Circular type 18.58.1.1 100 mm nominal dia

Part C :-- Internal Electricfication Work

Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in P.V.C. conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrand single core Copper Conductor cable as earth wire drawn inside & piano type switch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etc complete in all respects as directed including matching colour wash.

Wiring point for fan. and light duty exhaust fan with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in P.V.C. conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrand single core Copper Conductor cable as earth wire drawn inside & piano type switch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etc complete in all respects as directed including matching colour wash.

Supply and wiring of 2 nos 2.5 sq.mm. FR but in but in 25 mm dia heavy duty (2 mm thick) PVC conduit FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable partly concealed in wall & partly laid in slab along with reinforcement before concreting, with two number 14 SWG copperearth continuity wire including matching colour wash etc, complete in all respect

S & F surface/Flush mounting 8ways SPN distribution board without additional metal door without MCB complete in all respect, as direct by Engineer in Charge.Cat B

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 480x480x200 mm. size

Add for lightfan point with modular type switch in place of piano type switch

Add for plug with modular switch & socket inplace of piano type switch & socket

Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch

wall fan crompton 16"

Fresh air fan 250mm

supply and fixing of recess/ Surface/ pendent mounting round 10 to 15 watt LED Down Lighter having powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect CAT AAA

supply and fixing of recess mounting round 15 to 18 watt LED Down Lighter having powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect CAT AAA

Coloured tinted float glass 6mm thick substrate with reflectivesoft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.