Hapur Pilakhua Development Authority Tender

Supply and fixing of 2 metres high cage fabricated with 3 mm thick expanded metal fixed on 50 mm x 50 mm x 6 mm angle iron frame having vertical members spaced at 1 to 1.25 mts. and horizontal members spaced at 1mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300 mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinge etc. the cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour T & P etc. for proper completion of work. complete as per direction of E/I.SOR.No-1142/18

S/F of stay set at least 3.5 mtr. Away from the pole complete with GI 19 mm dia. & 1.80 long stay rod 30 cm. x 63 cm. Anchor plate thimble stay clamp, stay insulator, 19x600 mm. double screw tightner, 7/8SWG GI stay wire etc in 1:3:6 cement concrete & grauting as per direction of E/I. SOR NO.-631/18

S/F of danger board with clamp nut & bolt etc all complete. SOR. NO. 1109/18

Const. of T/F plinth size 1.5x1.5 & height over all 1.30 mt. made of 1st class B/W in 1:4 ( 1 cement & 4 coarese sand ) in foundation 100 PCC in 10:5:1 & top of the plinth 100 mm PCC in ratio 1:2:4 ( 1 cement 4 coarse sand & 4 stone ballast agreegate 4cm ) complete with 12mm Plaster all side and white Wash etc as per direction of E/I(A.R. 2018)

Const. of feeder pillar plinth size 1.50 x 0.58 mt & Height 0.45 mt with 1st class B/W in 1:4 in foundatio 100mm PCC ratio 10:5:1 and on top 100m PCC in ratio 1:2:4 ( 1 cement 4 coarse sand & 4 stone ballast agreegate 4cm ) including plaster & white wash etc all complete. (A.R. 2018)

Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in allrespects including painting with aluminium paint .SOR.No-623/18

S/E of 8.5 mt. long PCC pole support grouted in 1:4:8 (cement fine sand CC) including 30 cm high plinthing from ground level with the cost of all material lab. T&P etc required for proper completion of work or as direction of E/I. (A.R. 2018)

S/F of pole mounted type CMS TPN distribution box Sintex size 400 X 300 X 190 MM & 4 Nos. 40 X 50 mm aluminium bus bar with ingress protection to IS 8623 cable entry from bottom & /or sides shockproof & rustproof, suitable for polluted atmostpheres were high working tempreture & higher arc resisteance witherproof & maintenance free complete with supporting clamp i/c locking arrangement & painting etc complete as per direction of E/I. (A.R. 2018)

Supply, Installation, Testing and commissioning of 400KVA 11/0.433kv Aiuminium/copper wound distribution T/F Level-1or 2 Rating complete as per UPPCL specification etc all complete(A.R. 2018)

S/F of suspension clamp suitable for hanging of various size ABC conductor on pole etc all complete as required. (A.R./18)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR/2018

(ii) 400 sq mm 3.5 core 501(t) (1X2X15)

S/F of palm or pin type crimping cable socket to the cable leads & making connection etc all complete. SOR/2018

Supply and burying earth electrode for lightning conductor of 600mm x 600mm x 6.0 mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia. G. I. pipe for watering funnel, 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal / coke and salt at least 150 mm thick alround etc. as per directions of E./Ic. complete in all respect. SOR NO.-703/18

(vi) 16 sq mm 4 core SIN-501(i)

Supplying and erection of 11 kV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. DSR 2018 SI NO. 13.10

Supplying and erection of 11 kV disc insulator for 11 kV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. DSR 2018 SI NO 13.11

Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 11/22/33 kV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc. and painting with primer and finish paint as required. DSR 2018 SI NO. 13.3

S/F of MS channel 2.24 mtr. Long (100X50 mm ) MS top channel (7.9 kg/m) for D.P./ Section pole all complete. (A.R. 2018)

(B) L.T.

S/E of strud stay with 8.5 Metre long PCC pole grouted in 1:4:8 cement fine sand & obb mixture etc. all complete. (A.R. 2018)

S/E of 7/16 or 8 SWG GI wire on pole including binding etc all complete. SOR NO.-628/18

(ii) 240 sq mm SIN-504(m)

Const. of fencing plinth clear inner size 4.5 x 7.0 x 0.45 mt. in 1st class B/W including plaster & providing M -150 Brick on edge floor laid dry joint sand filing including perpration base to proper slope..all complete in open space or as direction of E/I. . (A.R. 2018)

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel out door type TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and nstrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in- Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fusesetc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board (Out door type) shall be destal type for Cat-B and C only. SOR NO, 805/2018 (C) Incoming 630 AMP TPN -1 No. Outgoing (I) 200 AMP TPN-2 NO., 100 AMP TPN -1 NO. & 63 AMP TPN-2 NO,

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 65 and above protection complete in all respect.SOR No. 1421 CAT - AAA /2018

S/E of over head line with suitable size ACSR conductor on pole including binding etc all complete. SOR NO.-627/18

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. SOR NO.-807(f)/18-- 40 A TPN

(ii) 400 sq mm SIN-504(o)

(A) H.T.

S/E of 120sqmm X 3 C + 1 x 95 sqmm + 1 x 16sqmm XLPE insulated ABC bare messenger wire etc complete as per direction and approved by E/I. (A.R. 2018)

(C) Sub Station

(iii) 240 sq mm 3.5 core SIN-501(r)

S/F of straight MS channel 75x40 mm size (5.7 kg / mt.) 2.24 mt. long for guarding with two nos. 11x116 mm eye bolts etc all complete.(A.R. 2018)

Supplying and fixing of light class G.I. pipe of 100 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable as required. DSR 2018/SI NO. 12.39

Supply and erection of stay set at least 3.5 metres away from the pole complete with galvanised 19mm dia. x 1.80 meter long stay rod, 30cm x 30cmx6.3 mm anchor plat, thimble stay clamps, stay insulator, 19mm x 600mm double serew tightener, 7/3.15 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respect of E/I. SOR.No-631/18

S/F of hexagonal/cradle type guards of 6 SWG including binding etc all complete SOR NO.-629/18

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.SOR NO.-717/18

S/F of PG clamp/connector suitable for connecting of various sizes ABC cable including insulating cap etc complete as per direction of E/I.. (A.R. 2018)

Supplying and erection of 11 kV disc insulator for 11 kV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. DSR 2018 SI NO 13.11