Hapur Pilakhua Development Authority Tender

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer- Incharge. SOR SI NO 504/18 ( make- gloster / havells / universal / polycab / grandlay) 10 sq. mm

16 sq. mm

50 sq. mm

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. CAT A PWD SOR1002 /2018 ( make - L&T / siemens / havells )

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and strument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal ype, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with alminimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. SOR 803 A II / 18 ( make - L&T / siemens / havells / schenider ) incoming 315 AMP TPN. 01 no. out going 100 AMP TPN. 03 no. CAT- B cubicle type

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR 14.16.2 / 14.16.3 / 22 63 mm dia (OD-63 mm & ID-51 mm nominal) (247*0.85212=210.47)

S/F of junction Box(sintex lockable) for street light connection complete.(Street light work at Tetile center Yojana) PSR ( bond No. 887 dt. 31-07-2020) garhmukteshwar puliya no. 01.

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. SOR 634 / 18