Hapur Pilakhua Development Authority Tender

Construction of un-reinforced plain cementconcrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriateweigh batcher using approved mix design, laid in approved fixed side formwork (steel) channel, laying and fixing of 125 micronthick polythene film, wedges, steel platesincluding levelling the formwork as perdrawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying debonding strips, primer, sealant, near approaches bridge/culvert construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Floter-Trimix Flooring Cum and to Machine. Technical pecification Clause 1501.

RCC work in ratio 1:1.5:3 with cement and coarse sand and 200mm stone grit completion of work

M.S (Tor steel or plain) work in plain work such as RCC or RB (SI.No 504 work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire

PART B

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the engineer-in-charge within a distance of 60 meter(200 feet.).

Deduction of cost of old brick bats obtained from dismantling of brick work.

Deduction of cost of old brick obtained from dismantling of brick work.

Concrete with 4 cm. gauge brick ballast fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tolls & plants etc required for proper completion of the work.

M-150 Brick work in 1:4 cement & 4 coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work.

12mm thick plaster with cement and coarse sand in 1:4 over brick work minimum thickness not to be less than 10mm thick including supply of all materials, labour and T & P etc. required for proper completion of the work.

Cement concrete with 2cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

Supply and Engagement of Labour (For cleaning for drain)