Greater Noida Industrial Development Authority Tender

Supply & erection of overhead line with ACSR conductor (DOG) on poles / service bracket including binding etc. complete in all respects. (UPPWD 2018/PS 627)

Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. (UPPWD 2018/PS 628)

Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint (UPPWD 2018/PS 623)

Supply & Fixing of 0.3mtr. long top channel for pin made of 100X50X6 mm G.I. channel with G.I. clamp, packing box, nut, bolt etc, complete in all respect (GNIDA SOR 2024/SL No.35)

Supply & Fixing of Cross arm made of 100X50X6 mm G.I. channel 1.15 mtr. long with G.I. clamp, packing piece, Nut, bolts etc, complete in all respect (GNIDA SOR 2024/SL No.34)

S/F of 11KV Polymeric Disc with Gun fittings on cross arms/clamps fixed on poles including all Nut, bolts & washer etc. (Jaishree, BHEL, RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. (GNIDA SOR 2024/SL No.68)

S/F of 11 KV Polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles. (Jaishree, BHEL, RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. (GNIDA SOR 2024/SL No.67)

Supply, delivery, laying, testing & commissioning of 11Kv (E) XLPE cable having compact circular stranded aluminium conductor the conductor should have screening of extruded semi conducting compound, cross linked polythylene (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part amendments) for following mentioned sizes. It should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand all-round and protected with bricks on sides and at the top surface. The cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/l. with Complete in all respect. The price are inclusive of supply & providing cable identification markers. The installation should be complete in all respect and as per requirement of the job under the direction of Engineer-in-cha (GNIDA SOR 2024/SL No.02 (D)

3CX300 Sqmm.

S/L of 160mm dia. H.D.P.E. pipe for drawing of power cable across the road by drilling of 180mm dia. at 1mtr below the road level thereby doing the work of providing H.D.P.E pipe by machine manual Trenchless method PE-63/PN-8 Ccomplete in all respect, as directed by Engineer in charge (GNIDA SOR 2024/SL No.25)

Supply, Installation, Testing & Commissioning of / 3X300Sq.mm 11 KV Out door type cable termination kit of 3 core cable with cable termination at the panel & transformer complete in all respect as required for proper completion of work as per direction of Engineer-in-charge (Make Raychem/C.C.I/Frontec) (GNIDA SOR 2024/SL No.05-E)

Painting of the electric pole with two coat of Al-paint over red oxide primer complete in all respect (UPPWD 2018/PS 634)

Numbering of Poles with combination of yellow and black colour paint etc. complete in all respects as per direction of E/l at site. (GNIFA SOR 2010/ SOR 42)

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. (DSR 2018/2.22)

Supply & erection of strut stay set with Steel Tubular pole 410 SP-58 including grouting, complete in all respect, as directed by Engineer in charge. (GNIDA SOR 2024/SL No.30)

S/E of Stay set atleast 3.5 M away the pole Complete with galvan ished 19mmdiax 1.80m long stay rod, 30cmx30cmx6.3mm anchor plate thimble, Stay clamps, Stay insulator, 19mmx600mm stay double screw tightner 7/3.5mm of G.I. Wire etc. 1:3:6 (cement concrete) (UPPWD 2018/PS 631)

Supply & fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. Below the GL complete with bolts & nuts & Gl earth wire 7/14. Complete in all respects as per direction of the Engineer-in charge. (GNIDA SOR 2022/ SOR 41)

Part 2

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP66 Protection complete in all respect. (Cat-AA) (UPPWD 2018/SI. No.1423)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS 501-PS507) (UPPWD 2018/SI. No.501)

16 sq. mm 4 core (i)

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (UPPWD 2018/SI. No.504)

16 sq. mm (d)

Supply and fixing of brass nickle plated . compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of ngineer Incharge. (UPPWD 2018/SI. No.503)

16 sq. mm 4 core (1)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti - corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 Α ΤΡΝ (UPPWD 2018/SI. No.807-F (ii))

Supply and fixing of Submains with two nos of 2.5 Sqmm FRLSH Pvc Insulated 1100 V grade Single Care multistrand Copper Conductor Cable in existing Condust Condust Complete with Supply of al material labour and T&P required for proper Completion of thr work as directed at Site by Engineer in charge S.NO-289 UPPWD-2018 (FTS No.128181)

Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. (UPPWD 2018/SI. No.623)

Supply and fixing of following dia G.I pipe (B Class) in pole used as LED Street light bracket for fixing of LED Street light and for Cable entry in cluding bending the pipe to the requred Shape Complete as required [Each piece make 1.5 mtr long] DSR-18/S.N-11.6.2 (used as Street light bracket) (FTS 130708)

Supply & fixing of 75 mm x 90 mm shackle insulator 2018/Sl./100 mm x 65 mm pin insulator including G.I. Bolts /spindle nuts etc. complete in all respect. (PS 2018 /620) (UPPWD 2018/SI. No.620)

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG Gl wire in G.I. Pipe up to appron (and) from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. (UPPWD 2018/SI. No.701)

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect (UPPWD 2018/SI. No.716)

Supply and fixing of heavy duty cadmium plated copper connector with end plate complete in all respect. (UPPWD 2018/SI. No.1128-a)

Two way connector HKM 100.

Supply & erection of stay set at least 3.5 Metres . away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect. (UPPWD 2018/SI. No.630)

Labour Cess and GST will be paid extra as per govt. orders