Gorakhpur Industrial Development Authority Tender

... More
The Gorakhpur Industrial Development Authority has issued a formal invitation for competitive bids for Road Widening And Rcc Drain, Interlocking Work In Sec 09 Gida Gorakhpur in Gorakhpur, Uttar Pradesh, with an estimated contract value of Rs. 6,43,01,973. The bid opening date for this tender is 17-11-2026 and the last date for bid submission is 17-11-2026. Interested bidders for Gorakhpur Industrial Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Gorakhpur Industrial Development Authority Tender - UP Tender

Opening Date17 Nov 2026
Closing Soon17 Nov 2026
Tender Amount₹ 6,43,01,973 
Notes
Download

Costs

Description

Road Widening And Rcc Drain, Interlocking Work In Sec 09 Gida Gorakhpur

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 m. & lead upto 30 m. Including filling watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth removal & disposal of surplus earth as directed by engineer in charge upto a distance of 30m from the foundation trenches. (Excluding Royality). SOR SNO-

2536.8

120

304416

... More
Cement concrete with cement 4cm gauge Stone Ballast and cement in proprtion of 6:3:1 n foundaton and under floor ncluding supply of all materals labour and tools and plants etc. required for proper completon for the Work SI no275

110.32

5960

657507.2

... More
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause . Morth Specification 4.10

809.32

4942

3999659.44

... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.complete as per clause 406. Morth Specification 4.14

1282.8

5162

6621813.6

... More
Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.complete as per clause 502. Morth Specification 5.01

10779.56

40

431182.4

... More
Providing and laying dense graded bituminous macadam with 100 TPH HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

808.47

13397

10831072.59

... More
Providing and applying tack coat with bitumen VG 10 using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. MoRTH specification clause No. 503 complete in all respects.

10779.56

12

129354.72

... More
Providing and laying bituminous concrete with 100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. ( Including Plastic

431.18

14808

6384913.44

... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.compaction as per MoRTH specification clause No. 803 complete in all respects.

467.6

618

288976.8

... More
Providing & Fixing 3M USA Brand CAT EYES on Road

1533

325

498225

... More
Construction of dry lean cement (DLC) concrete subbase over a prepared subgradewith coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not toexceed 15:1, aggregate gradation after blending to be as per specifications,cement content not to be lessthan 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not tobe less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-incharge.As Per SOR dt.01.11.2021 SI No- 280 P-43

192.75

7875

1517906.25

... More
M-150 brick work in 1:4 cement and C/sand mortar 4 in foundation and plinth including supply of all materials, labour and Tools and Plants etc. required for proper completion of work. 305.

534.74

4555

2435740.7

... More
Providing and laying of factory made 80 mm thick rubber moulded Interlocking cement concrete tiles (35mpa) including 25mm thick compacted bed of compacting and proper embedding/ laying of Interlocking tiles leveling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T&P etc.required for proper completion of work as directed by Engineer-in-Charge.

2920

810

2365200

... More
Providing and laying of 60mm thick interlocking (Colour) cement concrete tiles (30 Mpa) including levelling and dressing of suface to required level and slope, filling joints with local sand including the cost of labour, Material and T & P etc. required for proper complition of work as directed by Engineer-in-charge.

1000

741

741130

... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1 : 3 (1 cement: 3 coarse sand including making jonts with or without grooyes ), including making (Precast C.C. kerb stone shall be approved by Engineer-in-charge).DSR Item No 16.69

43.13

10117

436372.09

... More
Painting Two coat over priming coat on wood or steel and other metal surface and also on plaster surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping Including cost of all materials, labour,T&P etc required for the proper completion of the work. (21+27+23= Rs. 71.00 per Sqm) (SOR item no 1b+2+3(111)

1150

71

81650

... More
Cast cement concrete door sills, chaukhats boundry posts, shelves and similar small work with cement, approved coarse sand and 2 cm (3/4)"gauge' approved stone grit in the proportion of 1:2:4 excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including the cost of binding wire, moulds and all otehr materials, labour and T&P etc. required for proper completion of the work.

41.19

7510

309336.9

... More
Supply and filling of carted earth from a distance not exceeding 7 KM from the site of work and including cost of earth and all materials, labour T & P etc. Earth work in cutting or embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 0.50mtr. in depth and earth work in embankment & subgrade and earthen shoulders to be in 20cm Layers, including ramming and dressing the surface to required levels and slops and also including 1.5 meter lift and 30 meter lead. (Good Earth brought from out side away from GIDA notified area) MORTH Sr.no. 3.16 Specification 305.

3140.33

303

951519.99

... More
R.C.C. Culvert and Drain Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 m. & lead upto 30 m. Including filling watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth removal & disposal of surplus earth as directed by engineer in charge upto a distance of 30m from the foundation trenches. (Excluding Royality). SOR SNO- 251

1003.95

120

120474

... More
Cement concrete with 4 cm. (1½") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 6:3:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. (SOR SNO-280)

182.07

5960

1085137.2

... More
Plain / Reinforced Cement Concrete in Open Foundation Complete as per Drawing and Technical Specifications R.C.C Grade m20

1471.54

9062

13335095.48

... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. SOR SNO - 504 only use for sail brand Tmt bar

1732.74

6124

10611299.76

... More
C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved in the proportion of 1:1.5:3 in Bearing Coat in the Slab Item no283A

7.56

7910

59799.6



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.