Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Bid Number: GEM/2019/B/192320 Dated: 25-02-2019 Bid Document Bid Details Bid End Date/Time 07-03-2019 20:00:00 Bid Life Cycle (From Publish Date) 90 (Days) Bid Offer Validity (From End Date) 45 (Days) Ministry/State Name Uttar Pradesh Department Name Urban Development Department Uttar Pradesh Organisation Name E-municipalities - Eservices To Citizens And Employees Of Urban Local Bodies Of Uttar Pradesh Office Name Meerut Total Quantity 10 Item Category High Mast Pole with LED Flood Lighting System Average Turnover (Last 3 Years) 28 Lakh (s) OEM Average Turnover (Last 3 Years) 28 Lakh (s) Experience with Government Required 4 Year (s) MSE Exemption For Years Of Experience And Turnover No Startup Exemption For Years Of Experience And Turnover No Document required from seller Experience with Government,Annual Turnover,OEM Authorization Certificate High Mast Pole With LED Flood Lighting System ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Highmast with LED Luminaires contains High mast pole, LED flood light luminaire, Distribution box, MCB, Power cable, Wiring, Earthing road and wire, Mounting brackets and Yes * 1 / 10 other suitable accessories as applicable Installation and commissioning (Installation and commissioning work at multiple locations shall follow as per the guidelines of State/Central Govt., rules and regulations as applicable Yes. Including Civil work at site Yes. Including Civil work at site, Yes. Excluding Civil work, No Onsite warranty (in Years) 3 2, 3, 5 POLE Tubular steel poles shall be conforming to IS 2713/80(Part-1& 2) with amdt No-1 latest * ISI Marked No Yes, No ISI Marekd if "Yes" BIS License Number (CM/L Number) - Must declare (If No write NA) - * Length of Tubular steel poles (in Metre) 8 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12 Type of steel poles Swaged (SP) Swaged (SP) Designation of Tubular steel poles as per table 2 of IS 2713/80 Part-2 with amdt No 1 410SP-1 * Earthing arrangement as per Cl.14.1 of IS:2713:1980 Part 1 latest Yes Yes, Yes Coating on the tubular steel poles (for entire length) Galvanised min. Mass of Zinc coating 360 Gms. sq. Mtr., Galvanised min. Mass of Zinc coating 360 Gms. sq. Mtr.,, Bitumen coated as per clause 13.1 of IS:2713 part 1/1980 Grade of steel tube, as per IS:1161/1998 Yst 240 Yst 240, Yst 310 Availability of Type Test Reports of the product from Central Govt/NABL/ILAC accredited Lab showing compliance to the Yes * 2 / 10 specification (as per IS:2713:1980 Part 1, Part 2 latest). LED FLOOD LIGHT LUMINAIRE No. of Luminaires per pole 8 Nos. / pole 8 Nos. / pole LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * Types of LED Luminaire as per the IS: 16107(Part-2/ Sec.-1)/2012 Type B * Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 * LED Rating/System Wattage/Rated Power 150W * Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP65 IP65, IP66, IP67 Mounting brackets (included) Adjustable * Input operating Voltage range and frequency 90 to 300 V olts AC at 50 Hz+/-2 Hz, 90 to 300 V olts AC at 50 Hz+/-2 Hz,, 140 to 270 V olts AC at 50 Hz+/-2 Hz with auto cutt off at below 120V Automatic Higher Cut off voltage above 300 volt Yes * Rated voltage 230 V AC 50 Hz * AC Power Factor at full load ≥ 0.95 * Driver Efficiency (in %age) ≥85 * Total Harmonics Distortion (in %age) ≤ 10 * The total circuit power Yes * 3 / 10 shall not be more than 110 percent of the value declared by the manufacturer" LED chip Efficacy ≥130 Lm/Watt * Colour temperature (+/-500K) 6000K 6000K, 5000 K Working life for LED (Minimum 50,000 burning hours as per LM-80 rep

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.