Bareilly Development Authority Tender

R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. As per PWD SOR 2023 item no.283A

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. As per PWD SOR 2023 item no.504

Supply & installation of poly Fibre/ polymer stone fibre fencing for road divider size 2130mmX900 mm Scope of Work The scope includes the supply, installation, and fixing of Fibre Reinforced Polymer (FRP) fencing, as per the approved design drawings, and directions of the engineer in charge. The work involves supply of materials, and complete installation, ensuring compliance with quality and safety standards. Technical Specifications 1. Material The fencing components shall be manufactured using Fibre Reinforced Polymer (FRP): The FRP material shall have the following properties High strength-to-weight ratio, Corrosion resistance against water, chemicals, and UV exposure. Weatherproof and rot-resistant for outdoor durability Dimensions Height: 900 mm. Width: 70 mm. Thickness: 35 mm Clear Spacing: 150 mm between two fencing members. 3. Fixing Details Each fencing member shall be fixed with 100 mm x 150 mm Mild Steel (MS) plates of 4 mm thickness. The MS plates shall be securely anchored to a concrete surface using corrosion-resistant fasteners or chemical anchors All fasteners used shall be made of stainless steel or coated with a weather-resistant finish. The alignment of fencing shall be true to alighnment and the installation shall be free from any distortions or defects. 4. Weather Resistance The fencing material must be resistant to rust, rot, and adverse weather conditions, including exposure to UV rays, rain, and temperature fluctuations FRP fencing must maintain its structural integrity and appearance over time 5. Design and Appearance The fencing design shall be aesthetic, functional, and as per the approved drawing provided by the engineer in charge The color of the fencing shall be UV-stabilized and approved by the engineer in charge. Production Method: 6. Manufacturing Process Hand lay-up, resin transfer moulding (RTM), or vacuum infusion for uniformity and strength Each Fencing reinforced by MS, MS covered with FRP to increase the life. Supplier must have FRP Chopper Spray Machine and use as per requirement (Hight -900mm Width-70mm. thickness-35mm Each fenching member shall be fixed with 100 mm X 150mm mild steel (ms)plates of 4 mm thickness.the ms plates shall be securely anchored surface using corrosion-resistant fasteners or chemical anchors. All fasteners used shall br made of stainless steel or coated with a weather-resistant finish. The alignment of fencing shall be precise, and the installation shall be free from any distortions or defrcts. All work completed as dircation by E/I