Banda Development Authority Tender

P/L 12mm. Thick Plaster 1:4 Cement & Sand on brick work minimum thickness not less then 10mm with 1 part of cement and 4 part of find sand of 1.25 fineness modulus. Comlete with all respect as per (S.No. 584)

Earth work in excavation in foundation, in ordinary soil (loam clay or sand) including lift upto 1:5m (5ft) and lead upto 30 m (100 ft) and including filling watring and ramming of excavated earth in to tha tranches of in to the space between the building and sides of foundation tranches or in to the plinth and removal and disposal of surplus earth as deriction by the Engineer I/C. up to a distance of 30mtr. (100ft) from tha the foundation tranches (Sl no. 251)/2020-21

cement concrete with 4cm gauge approved stone ballast, course sand, cement in praportion of 8:4:1 including supply of all material labour , T&P Etc. requried for proper completion of the work (SI.No. 281)

Class 150 Brick work in 1:3 cement and course sand in foundation complete with all respact including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. (SI No. 307)

R.C.C. work with cement, approved coarse sand and 2cm (3/4'') gauge approved stone ballast for T- beam & Slab roof and RCC column in the proportion of 1:1.5:3. excluding supply of rainforcement and its binding but including its fixing and binding wire copmlete with all respect. (S.I. No. 288)

2cm. Thick cement Plaster in dedo of stracking in 12 consisting of one part of cement and two parts of approved coarse sand laid in panels finished with 3mm. flooting coat of neat cement or cement and marble dust in ratioo of 5:1 including supply of all materials, labour and plants etc. required for proper completion of the work (SI No. 597)

Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of 11.18.1 Light shade pigment using white cement (DSR 11.18.1) /2021

Providing and fixing 10 cm. dia. HCI soil or vent pipe RIF, BIF, SKF make ISI marked including digging and filling trenches and supply of clamps including supply of all materials, labour, T&P etc. required for proper completion of work. The pipe shall either be fixed parallest to the walls, with M.S. clamps or laid in ground to proper slopes

Providing and fixing stone ware gully trap 150 mm. x 100 mm. ISI marked with 100 mm. dia. HCI grating, brick masonry chamber (including lime concrete 100:16:32 0.08 cum., M-150 class brick work in 1:6 cement sand fine sand mortar 0.11 cum, 12 mm. thick 1:3 cement and coarse sand plaster with neat cement finish 0.303 sqm. and cement concrete 1:2:4 cement coarse sand and 20 mm. graded stone grit 0.0065 cum.) and water tight 30 cm. x 30 cm. CI cover with frame as per standard design (5.00 kg.) complete set including supply of all required materials, labour, T&P etc. required for proper completion of the work.

Supply and fixing Nahani Trap Indian make of approved heavy quality complete with CP brass grating, Nahani trap laid over base cement concrete 1:6:12 including supply of all materials, labour, T&P etc. required for proper completion of the work.

Finishing walls with premium acralic smooth exterior paint with silicone additives of required shaid complete with all respect (DSR.13.47.1)/2020

Boring of 30 cm. dia piles of single under reamed of 50cm dia of bulb and 3.5 meter-Depth in black cotton soil with and hand opreated auger machine. including supply of all materials, labour Tools & Plants etc. required for proper completion of the work (SI No. New itam-03) /2020-21

M.S. or iron in heavy sizes such as trusses built up gates, door, frames records, racks, roofwork, gates etc. wrought to required for including drilling holes rivetting or welding where necessary and also including supply of steel, bolts nut wastege etc and their fixing required for proper completion of the work in new itam. SI No.- 503

Supply and fixing low density polythene tank sintex or equivalent. (New Itam)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent (DSR 11.56.1) /2021

Providing and fixing white vitreous china pedestal type water closet european type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. 17.2.1

Painting or Varnishing work in small area on new wood or iron work with one coat (upto one square meter) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnishing including supply of all materials, labour and T & P etc. required for proper completion of the work.(SI 641+642)

Applying one coat of water thimmable cement primer of approved brand and manufacture and wall surface (13.43.1) /2020

30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing 550mmx400 mm. wash hand basin of white glazed earthen ware 1st quality ISI marked (Hindustan, Neyer, Cera make) with RS or CI brackets painted white, 15 mm. dia. CP brass pillar cock with CP metal handle (weigth not less than 400 gms.) ISI marked and 32 mm. dia. CP brass chain with rubber plug, 32 mm. dia. CP brass waste standard pattern with check nut 32 mm. dia. CP brass P or S trap and unions complete with PVC connection 0.50 size including supply of all required materials, labour, T&P etc. required materials labour, T&P etc. required for proper completion of work and including cutting and making good the walls and floor with cement, coarse sand and grit, fittings used should be of superior quality.

As in Item No. 201 above but for 20 mm. dia. B-Class ISI marked G.I. Pipe.

Providing and fixing 15 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe complete with G.I. specials such as bends, tee, socket cross, clamps, earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting, where required, cutting and making, good the walls etc. and materials, labour, T&P etc. complete. (Internal work)

Engraving lines in the plaster of the outer face wall ve rtical and horizontally to display the surface as stone facing as direccted by the E/I including L&PT and Plants etc. required for proper completion of the work (SI No. 598)

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern (DSR 17.6.1)/2021

P/F manglore tiles for roofing as per deriction of E/I complete with all respect (MR)

P/L " brick bat coba" 100 mm. thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm. thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concreat water proffing compound filied gaps of coba & top of coba mortar mixed with water proffing compound 1:4 with cwement and coarse sand mortar finished smooth and top mashed false square 30cmX30cm and side wall parapet shall be monot ythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finishing plaster mixing with acetic ater proffing compound @ 2% by weight @ including supply of all materials labour T&P etc. required for proper completion of the work. (SOR NEW Itam -1)

Supply and fixing CP bib cock heavy quality 15 mm. dia. (400 gms.) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work.

Class 150 Brick work in 1:3 cement and course sand in Super strcture complete with all respact including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. (SI No. 307+309)

P/A white cement based putty of average thickness 1.0 mm complete with all respect as per DSR 13.80/2020

Mild steel Or iron work in plain work such as in RCC (when not included in over all rates) wrought to requerd shape as necessary including banding for proper completion of the work and including supply of steen, its wastage and hooks and authorised over lapping shall be measured (SI No…504)

Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge (DSR 11.46A)