Ayodhya Development Authority Tender

DESCRIPTION OF ITEM

•Floating Public Bathing Kund & Amusement Park should have overall dimensions of L: 25 m, W: 15 m, H: 0.8 m. It should include two kund of size L: 15 m, W: 4 m, H: 0.9 m to 1.2 m. There should be two walkways of dimensions L:10 m, B: 3 m, H: 0.8 m placed towards the shore side for separate entry and exit on the Floating Public Bathing Kund & Amusement Park. •Each Floating module of Floating Public Bathing Kund & Amusement Park should be made of Floating Jetty Modules and should be made of HDPE 5261Z grade raw material whose melt flow rate should be less than 3 g / 10 min @ 190 Degree C and 21.6 kg Load •Each Floating module of Floating Public Bathing Kund & Amusement Park should be of L: 0.5 m, W: 0.5 m, H: 0.4 m. (203 Sq mtr : Double Layer) •Shape of each Floating module of Floating Public Bathing Kund & Amusement Park side surface should be held together 3 dimensionally due to their male - female interlocking shape such that they offer much higher-pressure resistance and strength in water. Weight of each module should be 7 kg – 8 kg. •Load Capacity (Buoyancy) Floating module of Floating Public Bathing Kund & Amusement Park (Double Layer) Floating Modules should be minimum 700 Kg per sq. mtr and Safe Load Capacity of Floating Public Bathing Kund and Amusement Park (Double Layer) Floating Modules should be minimum 400 Kg per sq. mtr. •Floating Public Bathing Kund & Amusement Park should be made of Double layer (Height: 0.80 m) Floating Modules. •Note: Test certificate of Melt Flow Rate of Raw Material of Floating Module of Public Bathing Kund & Amusement Park should be submitted along with the Technical Bid from CIPET India or any reputed research centers which are acceptable internationally. •Proof of Purchase of HDPE 5261Z grade raw material of Floating Module of Floating Public Bathing Kund & Amusement Park should be submitted along with the Technical Bid. •Department may ask for submission of any item sample from any of the bidders for physical technical verification and so the bidder must submit a ‘Self-Attested Undertaking’ in technical bid with assurance of submitting samples within 10 working days at own cost with no liability of department •Both the Floating Bathing Kund’s must be provided with Submerged Floor Modules and should be made up of Polyethylene Material. •Size of Single Submerged Floor Module should be L: 3 m x B: 2 m x H: 0.40 m.(120 Sq mtr : Single layer) •Size of Single Submerged Floor Module should Not be Less Than 5 Sq. Mtr, Load Capacity (Buoyancy) of each Submerged Floor Module should be minimum 2000 Kg. •Manufacturing Process of the Submerged Floor Module should be Rotational Moulding Plastic Manufacturing Techniques. •Top surface of Submerged Floor Module should be CSIRO/Equivalent slip resistant which should be 100% skid proof, corrosion proof, UV treated and made from Virgin Plastic and should be a part of the main body (Relevant Certificate should be submitted with Technical Bid), Weight of Submerged Floor Module should be 200 Kg (± 10 Kg) •Thickness of Single Submerged Floor Module should be Approx. 10 mm to 12 mm Submerged Floor Module should be designed withinterconnecting High Density Rubber Dog Bones at the top and bottom with the help of a SS 316 Studs. •A Minimum of 4 Connections and a Maximum of 6 connections should be used on each side of the Submerged Floor Module when it is connected to other Submerged Floor Module based on the design. •The OEM of the Submerged Floor Module should have a valid Works Approval certificate from any of the IACS members.This certificate should be submitted along with the technical bid. •The manufacturer of Submerged Floor Module should be manufacturing the Submerged Floor Module of minimum L: 3 m x B: 2 m x H: 0.40 m for the past 5 years.Proof of the same to be provided. •Department may visit Manufacturing Facilities of any of the bidder during technical evaluation for inspection purpose and so the factory addresses have to be provided in the technical bid. •Stability of Larger Submerged Floor Module Blocks: The chosen dimensions of L: 3 m x B: 2 m x H: 0.40 m Submerged Floor Module are intended to provide stability and larger block size to support the floor load efficiently.

•Ramps made up of GI material of L: 4 m, W: 1.5 m should be provided on entry and exit walkway of Floating Public Bathing Kund & Amusement Park •There should be 4 nos. of Staircase provision leading downwards to the Floating Bathing Kund area for easy access. •The staircase should be placed diagonally on either side of each Floating Bathing Kund and each Staircase should be made of SS 304 material and its dimensions should be approx. L:1.2 m, W: 1.5 m with railing on both the sides with checkered grip. •A total of 2 staircases should be provided in each Floating Bathing Kund for easy access •Floating Public Bathing Kund & Amusement Park should be provided with human safety railings on all sides of the structure including the walkways. •Human safety railings should be made up of HDPE material and should have the provision to fix 3 parallel ropes to create a safety barricade •HDPE Heavy Duty Long Fender of Length between 1.2 m to 1.5 m, weight between 5 kg to 7 kg and with 3 lugs to be fixed on the Floating Public bathing Kund & Amusement Park at required places using Nuts & Bolts of same material to protect Floating Public bathing Kund & Amusement Park from being hit directly by the Boats