Uniform Tenders

Details: Description:- Rehabilitation Of Existing Week Formation By Replacing Top Layers Of Existing Formation Only With mechanically Manufactured Blanketing Material Of Specified Formation Width And Thickness Under Traffic/power block Or Without Traffic Block By Blocking The Line For Longer Period By Diverting The Traffic Or Otherwise. The Item includes All Things Necessary To Complete The Work, All In Accordance With The Latest Applicable Specifications, guidelines, Manuals Instructions And Includes, More Particularly, And Without In Any Way Limiting The Generality Of liability To Complete The Work In All Respect E.g. (i) Dismantling/lifting Of Track Panel By Crane, (ii) Scooping Of Ballast from Track, Screening & Stacking Along Track (iii) Removal Of Top Layers Of Existing Formation Up To 550 Mm (iv) spreading Of Blanketing Material In Layers Not Exceeding In 30 Cm In Thickness In Loose Conditions, Leveling By motor Grader & Compacting By Vibro Roller Of Required Capacity Up To Specified Degree Of Compaction To Achieve A compacted Blanket Thickness Of 550 Mm & Finishing To Correct Profile. (v) Placing 4m Width Of Non-woven Needle punchedandmechanicallyorthermallybondedtypegeo-textilewithminimumstrengths In Grabtest, trapezoidal Tear Test And Puncture Test Of 1750n, 800 N And 5800 N Respectively (vi) Spreading New/screened ballast Layer Of 200mm Uniform Thickness Over It And Compaction By Rollers (vii) Linking Of Track Panels With Crane and Connecting At Both Ends, Initial Packing And Leveling (viii) Screening Of Scooped Ballast, Stacking And Using The same At The Same Location Or Adjacent Location Along With Additional Ballast To Provide Specified Cushion And profile (ix) Disposal Of Waste Material At Nominated Place (x) All Pre And Post Attention During Required Nos. Of machine Tamping (xi) Removal Of Service Rails With Rail Panel And De-stressing Of Track After Final Packing & surfacing And All Other Incidental Works Required To Complete The Work In All Respect. Under Traffic Block

Details: Description:- Rehabilitation Of Existing Week Formation By Replacing Top Layers Of Existing Formation Only With mechanically Manufactured Blanketing Material Of Specified Formation Width And Thickness Under Traffic/power block Or Without Traffic Block By Blocking The Line For Longer Period By Diverting The Traffic Or Otherwise. The Item includes All Things Necessary To Complete The Work, All In Accordance With The Latest Applicable Specifications, guidelines, Manuals Instructions And Includes, More Particularly, And Without In Any Way Limiting The Generality Of liability To Complete The Work In All Respect E.g. (i) Dismantling/lifting Of Track Panel By Crane, (ii) Scooping Of Ballast from Track, Screening & Stacking Along Track (iii) Removal Of Top Layers Of Existing Formation Up To 550 Mm (iv) spreading Of Blanketing Material In Layers Not Exceeding In 30 Cm In Thickness In Loose Conditions, Leveling By motor Grader & Compacting By Vibro Roller Of Required Capacity Up To Specified Degree Of Compaction To Achieve A compacted Blanket Thickness Of 550 Mm & Finishing To Correct Profile. (v) Placing 4m Width Of Non-woven Needle punchedandmechanicallyorthermallybondedtypegeo-textilewithminimumstrengths In Grabtest, trapezoidal Tear Test And Puncture Test Of 1750n, 800 N And 5800 N Respectively (vi) Spreading New/screened ballast Layer Of 200mm Uniform Thickness Over It And Compaction By Rollers (vii) Linking Of Track Panels With Crane and Connecting At Both Ends, Initial Packing And Leveling (viii) Screening Of Scooped Ballast, Stacking And Using The same At The Same Location Or Adjacent Location Along With Additional Ballast To Provide Specified Cushion And profile (ix) Disposal Of Waste Material At Nominated Place (x) All Pre And Post Attention During Required Nos. Of machine Tamping (xi) Removal Of Service Rails With Rail Panel And De-stressing Of Track After Final Packing & surfacing And All Other Incidental Works Required To Complete The Work In All Respect. Under Traffic Block

Description: Led Weather Proof 20 W Fitting 4 Feet Lo [led Weather Proof 20 W Fitting 4 Feet Long (approx) surface/pendant Mounting Led Tube Fitting O/d Type Complete With Corrosion Resistant Dust And water Proof Unbreakable Polycarbonate Body Off White Finish, Frosted Pc Diffuser For Glare Free uniform Light, Protection-ip65, Costant Current Above Isolated Driver, Input Voltage Range 140- 270v Ac 50hz Single Phase With Auto Cut Off, Pf- 0.90, Thd-10%, Colour Temp. 5700k-6500k, view Angle - 120 Degree, Output Lumens- 100 Lm/w, Cri>75, Mini. Efficacy Of Driver 85%, Short circuit And Open Circuit Protection Mini.surge Voltage - 1.5 Kv, (1)led Lm80/is:16105 Test report Support The Same, (2)proof Or Procurement Of Led By Menufacturernot Latter Then 6 Month old, (3) Driver Shall Comply The Performance And Safety Requirement As Per Iec:62384/is:16104 & Iec/61347-2-/61347-2-13/is:15885-2-13 With Test Certificate Of Nabl Accredited Laboratory shall Be Submited, Light Source- Smd Type, Brand/make- Engraved/embossed Minimum Rep. warranty 03 Years.make- Jaquar, Surya, Bajaj, Havells Similar.]

Details: Description:- Supplying & Stacking Of Machine Crushed Hard Stone Ballast Of 50 Mm Nominal Size Of Approved quality And Confirming To Rdso Latest Specification Over The Finished Formation Or Along The Cess Of The Alignment of The Section Between Rbz-hyt-tlwa Stations (including Yards) In Samastipur-darbhanga Section As Directed byengineer-in-chargeoftheworkorhisrepresentativeatsite.therateincludesallcostofmaterials, transportations And Royalty, Octroi, Sales Tax And Other Taxes Imposed By Central/state Government And Local bodies Including All Other Incidental Charges With All Leads, Lifts, Crossing Railway Lines If Required And Levelling Of stacking Ground. The Stacking Ground Will Be Certified By The Engineer-in-charge Of The Work. "note: (i) The payment Will Be Made @ 90% Of The Accepted Rate Of Supplying & Stacking Of Ballast. Balance 10% Payment Will be Made Progressively On Completion Of The Item No.- 2 I.e. Spreading Of Ballast. (ii) The Ballast Stacks Should Be uniformly Distributed Along The Alignment. The Space For Stacking Of Ballast Will Be Decided By Engineer-in-charge of The Work Or His Representative At Site. (iii) The Stacking Ground Is To Be Made Level Before Supply Of Ballast. No extra Payment Will Be Made For This Levelling."

Details: Description:- Removal Of Wastes, Perishables And Other Discarded Waste Materials From The Yard Approaches (beyond 50m From The Farthest Platforms End In Two Directions.750m In Both Directions) In Entire Width Of The formation/ Cutting By Collecting Wastes From Track And Dumping And Disposing It At Nominated Location Or Any other Means As Directed By The Engineer In Charge.(all The Tools,materials And Labours Requierd For The Work should Be Supplied By The Contractor Only).(majn Station ) Approximate Area Per Day 36900sqm To Be Cleaned twiceperday.manpowerrequiredisbetween07.00hrs-13.00hrsand14.00hrs-16.00hrs.note:- 1.contractorshastoengageminimumlabour3nos.2.contractorhastodisposewasteeitherthrough coporation/haritha Karma Sena Or Dumping And Disposing It Outside Raiway Boundary In Any Dumping Site available In The Area. 3. The Contractor Should Ensure That The Following Protective Gears To Be Provided To The labourers,uniforms For Labours, Suitable Foot Wear, Gum Boots, Illuminous Jacket, Arm Band, Cap, Face Mask (cloth), Gloves Rubber Cover Upto Elbow, First Aid Box, Rain Coat. 4. Area For Waste Segregation Can Be Done At nominated Locatin Given By Enginner In Charge.

Details: Description:- Removal Of Wastes, Perishables And Other Discarded Waste Materials From The Yard Approaches (beyond 50m From The Farthest Platforms End In Two Directions.750m In Both Directions) In Entire Width Of The formation/ Cutting By Collecting Wastes From Track And Dumping And Disposing It At Nominated Location Or Any other Means As Directed By The Engineer In Charge.(all The Tools,materials And Labours Requierd For The Work should Be Supplied By The Contractor Only).(can Station ) Approximate Area Per Day 30000sqm To Be Cleaned twiceperday.manpowerrequiredisbetween07.00hrs-13.00hrsand14.00hrs-16.00hrs.note:- 1.contractorshastoengageminimumlabour3nos.2.contractorhastodisposewasteeitherthrough coporation/haritha Karma Sena Or Dumping And Disposing It Outside Raiway Boundary In Any Dumping Site available In The Area. 3. The Contractor Should Ensure That The Following Protective Gears To Be Provided To The labourers,uniforms For Labours, Suitable Foot Wear, Gum Boots, Illuminous Jacket, Arm Band, Cap, Face Mask (cloth), Gloves Rubber Cover Upto Elbow, First Aid Box, Rain Coat. 4. Area For Waste Segregation Can Be Done At nominated Locatin Given By Enginner In Charge.

Description: A] Sc. Cloth Cotton Unifrom Of Different Types Consisting Of 1] Cloth Boiler Suit, Qty-56 Kg In 01 Gunny Bag, 2] Cloth Trouser Drill Dark Grey, Qty-106 Kg In 03 Gunny Bag, 3] Cloth Shirt Cellular Dark Grey, Qty-243 Kg In 09 Gunny Bag, 4] Socks Cotton, Qty-519 Kg In 15 Gunny Bag., 5] Coat And Capes Water Proof, Qty-529 Kg In 13 Gunny Bag, 6] Pagree Red,qty-120 Kg In 04 Gunny Bag, 7] Red Blouse Khadi,qty-74 Kg In 03 Gunny Bag, B] Sc. Cloth Terry Cotton Unifrom Of Different Types Consisting Of 1] Cloth Coat Sb/tc Blue,qty-579 Kg In 15 Gunny Bag, 2] Cloth Shirt T/c White,qty-435 Kg In 10 Gunny Bag., 3] Cloth Trouser T/c White,qty-974 Kg In 25 Gunny Bag, 4] Cloth Shirt T/c Sky Blue,qty-309 Kg In 08 Gunny Bag, 5] Cloth Trouser T/c Navy Blue,qty-421 Kg In 13 Gunny Bag, 6] Cloth Shirt T/c Pp Blue,qty-94 Kg In 03 Gunny Bag, 7] Cloth Trouser T/c Blank,qty-974 Kg In 26 Gunny Bag, 8] Cloth Shirt T/c Orange,qty-1395 Kg In 33 Gunny Bag, 9] Cloth Trouser T/c Dark Grey,qty-4581 Kg In 129 Gunny Bag, 10] Cloth Shirt T/c Dark Gray,qty-2289 Kg In 61 Gunny Bag, 11] Cloth Shirt T/c Fawn.qty-32 Kg In 02 Gunny Bag., 12] Cloth Trouser T/c Brown,qty-90 Kg In 03 Gunny Bag, 13] Cloth Trouser T/c Oxford Blue,qty-46 Kg In 02 Gunny Bag, 14] Sari T/c Brown,qty-360 Kg In 11 Gunny Bag, 15] Sari T/c Light Blue,qty-53 Kg In 02 Gunny Bag, C] Sc. Cloth Winter Uniform Of Different Types Consisting Of 1] Cloth Coat Blue Serge Supr,qty-514 Kg In 13 Gunny Bag, 2] Cloth Trouser Blue Serge Supr,qty-658 Kg In 14 Gunny Bag, 3] Cloth Coat Navy Blue Serge Supr,qty-688 Kg In 16 Gunny Bag, 4] Cloth Trouser Navy Blue Serge Supr,qty-679 Kg In 15 Gunny Bag, 5] Cloth Coat Sky Blue Serge Supr,qty-142 Kg In 04 Gunny Bag, 6] Cloth Coat Blue Serge Supr,(ldy, Pattern),qty-521 Kg In 14 Gunny Bag, 7] Cloth Coat Serge Ordy White,qty-23 Kg In 01 Gunny Bag, 8] Cloth Trouser Serge Ordy White,qty-25 Kg In 01 Gunny Bag., 9] Cloth Coat Serge Ordy Blue, Qty-197 Kg In 07 Gunny Bag, 10] Cloth Trouser Serge Ordy Blue,qty-47 Kg In 02 Gunny Bag, 11] Cloth Coat Serge Ordy Dark Grey,qty-73 Kg In 03 Gunny Bag, 12] Cloth Trouser Serge Ordy Dark Grey, Qty-687 Kg In 23 Gunny Bag, 13] Cloth Coat Serge Supr Dark Grey, Qty-230 Kg In 07 Gunny Bag, 14] Cloth Trouser Serge Supr, Dark Grey, Qty-273 Kg In 07 Gunny Bag, 15] Cloth Over Coat Blue Serge Ordy,qty-941 Kg In 38 Gunny Bag, 16] Cloth Over Coat Blue Serge Supr,qty-567 Kg In 19 Gunny Bag, 17] Jersey Woolen Marrun,qty-929 Kg In 29 Gunny Bag, 18] Jersey Woolen Dark Grey,qty-457 Kg In 10 Gunny Bag, 19] Jersey Woolen Dark Grey Cardigan,qty-100 Kg In 03 Gunny Bag. Condition- 1] Material Will Be Delivered On Weight Basis., 2] Weigh Machine Is Not Available At Drm Store Office But A Electronic Weigh Machine Of Capacity 500 Kg Is Available At Neighboring Lpo Section 20 Mtr (approx) Apart For Weighing The Items For Delivery Purpose, 3] Materials Are Offered Strictly On As Is Where Is Basis, So Intended Bidders Are Requested To Verify The Lot Items & Be Satisfied Before Bidding The Same, 4] Materials Will Be Delivered Along With Gunny Bag.

Description: CATEGORY: S1 Binding wire of good quality and branded , S2 Non skid Floor Tiles 600 x 600 mm Leaving Room of good quality and branded , S3 Wall Tiles 450 x 300 cm for Toilet of good quality and branded , S4 Piller cock long for wash basin of good quality and branded , S5 Bib cock two way of good quality and branded , S6 Bib cock 15mm of good quality and branded , S7 Round SS bib cock for wall of good quality and branded , S8 Taflon tape of good quality and branded , S9 GI Elbow 15 mm of good quality and branded , S10 Soap Stand of good quality and branded , S11 LED Tube Light 20W of good quality and branded , S12 LED Bulb 15 oblique 20 Watt of good quality and branded , S13 Modular Switch 5 oblique 6 Ampr of good quality and branded , S14 Modular Switch 15 oblique 16 Ampr of good quality and branded , S15 Modular Socket 15 oblique 16 Ampr of good quality and branded , S16 Modular Socket 5 oblique 6 Ampr of good quality and branded , S17 Exhaust Fan 12 inch of good quality and branded , S18 Ceiling Fan 48 inch of good quality and branded , S19 PVC Copper wire 1 point 5 Sqmm of good quality and branded , S20 PVC Copper wire 2 point 5 Sqmm of good quality and branded , S21 PVC Copper wire 6 Sqmm of good quality and branded , S22 Insulation Tape of good quality and branded , S23 MCB 32 Amp of good quality and branded , S24 MCB 16 Amp of good quality and branded , S25 MCB Box of good quality and branded , S26 Distemper white 1 kgs pack of good quality and branded , S27 Toilet sheet with complete accy Indian type of good quality and branded , S28 Allum Window 3 feet x 4 feet three channel of good quality and branded , S29 Supply of anodised aliuminium snap grid frame work of 605 x 605 mm size for false ceiling of good quality and branded , S30 Alluminium Door 7 feet x 4 feet of good quality and branded , S31 Door Stopper of good quality and branded , S32 Wash Basin with complete accessories of good quality and branded , S33 Angle Holder of good quality and branded , S34 Ceiling Fan Regulator of good quality and branded , S35 Switch board 2 way of good quality and branded , S36 Switch board 6 way of good quality and branded , S37 Wire clip of good quality and branded , S38 Roller for Distemper of good quality and branded , S39 MS Pipe 50 mm 6 Mtr length of good quality and branded , S40 CGI Sheet 10 feet long 0 pt 50 thickness of good quality and branded , S41 J Hook with Nut and washer of good quality and branded , S42 GI Pipe 20 mm 6 Mtr length of good quality and branded , S43 GI Pipe 15 mm 6 Mtr length of good quality and branded , S44 Manhole cover 2 feet x 2 feet of good quality and branded , S45 PVC Pipe 4 inch dia 6 Mtr length of good quality and branded , S46 Casing Caping 2 inch Length 3 Mtr of good quality and branded , S47 Erosion Control Mat on Slopes of good quality and branded , S48 MS Shuttering Plate size 1mtr x 1mtr made with 3 point 15mm thick MS sheet supported with angle iron size 50x50x6mm having properly welded comma uniform finish , S49 Coupler 50 mm Male and Female of good quality and branded , S50 Water Motor 2 HP with all accessories of good quality and branded , S51 Battery Charger for Tower light Model No R5H28 of good quality and branded

Description: CATEGORY: Rule Steel , Centre punch , Chisel Cold flat , Level spirit wooden , Plumb bob , Trowel , Stillson wrench , Cutting pliers 200mm , Steel tape , Chisel Round Nose , Inside Caliper , Caliper outside , Soil pot with brush , D E Spanners , Plumbers Laddle , Tool caulking , Pipe stock and dies complete with stocks bushing bushing holders Taps and wrenches sizes covered to suit pipes , Chain pipe wrench , Bath tub small size , Water closet European type p complete with overhead cistern , Water closet Indian type complete with overhead cistern , Urinal wall type complete with automatic system , Water meter , Fire Buckets with stand , Electric PPR pipe welding machine , CPVC UPVC Pipe cutter , Chase cutter electric , Facial Band , Spray bottle , Napkin , Hair cutting Scissors , Black Head Remover , Cutting Sheet , Velcro Rollers , Perm rollers Star Perm Ladder Perm spiral rods Chop sticks Wooden rollers , Back View Mirror , Professional Hairbrushes set , Re bonding Boards , Benders , Pedi spa tub , Manicure Trolley , Electric Manicure Kit , Galvanic , Ultra Sonic , Skin Analyser , Vacuum suction , Front wash Basin , Blanket , Wet Sterilizer , Yoga Mat , Air conditioner split , Safety goggles clear glass Good quality , V Block , Caliper transfer inside , Vernier Micrometer , Plain Ring and Plug Gauge , Drill Twist Set , Angle Plate , Fire Extinguisher and buckets , Oven electrode drying , Water cooled induction welding Brazing machine , Bench working , Work bench , Working Bench , ALMIRAH , Steel almirah , Wooden Almirah , Almirah , Wooden Almirah 10 drawers with inbuilt locks , Lockers with 8 drawers standard size , Steel Lockers , Lockers , Student Lockers , Computer table , Instructor s table , WoodenTable , Instructor s Table steel , Dual Desk or Chair and Tables for Training , Drawing Table , Drafting table , Instructor s Chair steel , Instructor s Chair , Opreators Chair , Revolving Chair , Metal rack , Wooden stool , Wooden rack for keeping the trainee shoes and bags , Wooden stand for hanging uniforms , Rheostat , Hydrometer with syringe , Portable digital density meter , Weighing Balance Digital , Conductivity meter Digital , Glue pot , Industrial pedestal polishing machine with dust collectors , Flexible shaft polishing machine , Bed blaster machine for blast cleaning , Vapour degreaser , Dipping basket perforated , Titanium anode basket , Moulded buckets , Submersible plating barrel with tank and complete setup , Oblique tumbling barrel with motor and complete setup , Hot air oven , Hull Cell apparatus with feeting like air , Pen plating touch up plating unit with DC rectifier digital display Anode tipped pen lead wire cathode for touch up multi metal , Connecting screwdriver , Screwdriverset , Soldering iron , Tweezers , DigitalMultimeter , Soldering Iron Changeable bits , De soldering pump electrical heated manual operators , Precision set of screwdrivers , Tweezers Bend tip , Chisel Cold Flat , First aid kit , DC Regulated Variable Programmable DC Power Supply , Digital and Analog IC Tester , Rheostats various values and ratings , Soldering AND De soldering Station , Seven segments DPM trainer , Allen key screwdriver , Jacket stripper Coring tool for 500 series cable , Center conductor cleaner , Universal drop trimmer for RG 6 by 11 cables , F connector tool for RG 6 by 11 cables , F connector compression tool for RG 6 by 11 cables , LED lighting system , 1hp motor , Solarpanel based Inverter , PLC Systems with digital I P O P modules Trainer kit and software , Solenoid , Lamp

Details: The Estimate Report For The Chithrapuzhaponjassery Road Project, Spanning From Chainage 11/640km To 21/640km, Takes Into Consideration the Road's Passage Through The Cochin Refinery area And Other Industrial Regions(fact, Philips carbon Limited, Petrochemical Park, It Parks). as Per Asset, The Road Length Is 8.360 Km.(ch 11/640 To20/000). But The Actual Length Of Road Is 10 Km (11/640 To 21/640). The Road Serves As A vital Connection For Several Key Locations, Such as Kizhakkambalam, Pallikkara, Perigala, karimugal, And Brahmapuram, Linking Crucial industrial Areas And Prominent Tourist destinations Like Veegaland Amusement Park and The Hill Palace Museum.the Road Can Be considered As Connecting Road To Famous chottanikkara Temple Which Is A Part Of sabarimala Piligrimage. The Road Width Varies from 7.0m To 14.5m And The Change Is Not uniform Or Gradual As Per The Engineering specifications. There Are A Lot Of Issues That Has to Be Addressed In This Project Like Evicting encroachments, Rectifying Waterlogging Areas, preventing Accident Zones, Removing Unauthorised Bus Stops, Auto Stands And Parking Of heavy Vehicles In This Road.the Current Project cannot Address 100% Of These Issues And Only some Of The Significant Aspects Like Bituminous macadam And Bituminous Concrete Overlaying, tiling With 100mm M40 Tiles In Severely Water logged Areas, The Reconstruction Of Damaged culvert At Perigala (chainage 14/140- Box Culvert proposal), And The Proposal For A New Culvert In A water-logged Area Near The Factory Of Philips carbon Ltd (chainage 17/000). the Estimate Primarily Focuses On The Following essential Items Included In The Budget Of 12 crores: bituminous Macadam And Bituminous Concrete overlaying: The Road's Resurfacing With bituminous Macadam And Bituminous Concrete overlaying Is Critical To Improve Its Structural integrity And Surface Quality. The Resurfacing For the Road Was Done More Than 8 Years Ago And only Patch Repairs Proposed Till Date, Heavy damages Occur Due To The Heavy Vehicles travelling To The Refineries/factories And Back. tiling With 100mm M40 Tiles: The Use Of 100mm M40 Tiles Is Vital To Enhance The Road's durability And Longevity In Cases Of Water logging. These Are Proposed In The Already existing Areas And Majority Of Them Are extensions/repair Works. reconstruction Of Culvert At Perigala Post Office portion (chainage 14/140): The Reconstruction Of this Narrow Culvert Is Crucial To Maintain Proper traffic Flow And Prevent Flooding During Heavy rainfall, Since It Is Partially Damaged Due To Its age And Heavy Traffic In This Region. Ensuring This culvert's Functionality Is Vital For The Road's durability And Safety. proposal For A New Culvert Near Philip Carbon ltd (chainage 17/000): The Proposal For A New culvert In The Water-logged Area Near Philip carbon Ltd Addresses The Persistent Issue Of water Accumulation In This Portion Of The Road. the Existing Structure Is A Depressed Drain (“chappathu”) Type Of Cross Drainage Structure and Needs To Be Upgraded And Rising Of The pavement Surface In The Adjacent Portions Is Also included In This Work. If This Work Is Not Done Almost 250 M Of Additional Tiling And Side Drain works On Either Side Of The Road May Be Required to Address The Water-logging In This Region