Uniform Tenders

Details: Description :leather Hand Sleeve For Welders, Make: Esab (part No. 2001007002) Or Ador (king Sleeve Guard) Or Unique Udyog Or Its Equivalent. Leather Ha nd Sleeve Should Give Protection From Splashing Of Hot Objects Like Welding Slag, Welding Spatter Etc. (1) It Shall Be Made Of Good Quality Of Chrome Leather/spl it Leather. (2)the Leather Used For The Hand Sleeve Shall Be Smooth, Uniform In Texture Free From Cuts Holes. (3) Thread Shall Be Good Quality Fire Resistant / Kev lar Thread. (4) The Length Of Hand Sleeve Shall Be 18.5 Inch Minimum. Other Dimension And Design Of Hand Sleeve Shall Be Suitable To All Size Of Workmen. (5) I t Shall Be Fitted With Elasticated Cuff, Velcro Arm Fastener And Knitted Wrist For Comfort. (6) As Per Is 6153/1971. Samples Needs To Be Approved By Consignee before Bulk Supply. [ Warranty Period: 12 Months After The Date Of Delivery ] ]

Details: Description:- Providing Material And Un-skilled Manpower For Cleaning Of Electrical Fittings & Fixtures in Non-ac Coaches Including Pantry Cars (each Coach Consisting Of Light Fittings, Fans, Switches & switch Boards, Exhaust Fans, Dbs, Battery, Pantry Equipment Etc) All As Per Detailed Scope And specifications At Bgm Depot. Notes: (i) Un-skilled Manpower For Cleaning Will Be Provided On Shifts Of 08 Or Lesser Working Hours Each In 24x7 Basis. (ii) Man Power Requirement In Each Shift Will Be decided By The Engr-in-charge As Per Maintenance Schedules. (iii) Cleaning Materials As Per Detailed specifications Are Included In The Scope Of Work. Cost Of The Same Is Deemed To Be Included In The quoted Rates. (iv) Cost Of Esi, Epf For The Hired Employees And Gst For Service Charges Etc, Are deemedtobeincludedinthequotedrates.(v) Provision Of Tools & Other Cleaning Equipment including Uniform And Proper Safety Gears For The Cleaning Staff Will Be Provided By The Contractor. cost Of This Provision Is Deemed To Be Included In The Quoted Schedule Rates.

Description: CATEGORY: Angle Grinder 4 inch-Bosch , Hand Drill Machine-Both Normal And Hammering-Bosch- 10 MM , Single Phase Welding Machine-Great Yuva , Bench Vice 4 inch NETCO MAKE , Welding Helmet , Hand Screen, , Welding Goggle , Hand Gloves , Chipping Hammer , Pipe Wrench 40 inch TAPARIA 1276 , Pipe Wrench 18 inch TAPARIA 1275 , Sly Wrench 12 inch TAPARIA 1173-12 , Pipe Threading Ratchet Handle Dia Set -.5 inch, .75 inch ,1 inch Netco , Flat File 12 inch Rough TAPARIA , Flat File 12 inch Smooth TAPARIA , Sprit Level 12 inchMAGNETIC TAPARIA P.NO. SLM 1012 , Chisel Octagonal 150x16-102 TAPARIA , Chisel Flat 6 inch- 1046 Taparia , Steel Rule 12 inch , Steel Tape 5 Mtr FREEMANS , Ballpain Hammer 800 GRAM TAPARIA , Ballpain Hammer 500 GRAM TAPARIA , Center Punch , Try Square 12 inch Vacado , Monkey Plaier TAPARIA 1225 , Combination Plaier -Heavy Duity- 8 inch TAPARIA 1621-8 , Nose Plaier TAPARIA 1430-6 , Neon Tester TAPAIA 813 , Philips Type Screw Driver 12 inch P6-862-300 TAPARIA , Ring Spanner TAPARIA 1812 , D Spanner TAPARIA DEP-12 , Drill Bit Set 1- 10 Mm Set Of 9 Pcs. Addison Make , TOOL KIT METAL BOX- All In One 108 Pcs,Bosch , 40 - 27 Box Spannel , Side Cutting Pliers 150 Mm Taparia 1621-6 , Flat Nose Plier 150 Mm, Taparia 1421-6 , Electrician Screw Driver 250 Mm Taparia - 903- , Electrician Screw Driver 100 Mm Taparia - 805 , Knife Taparia - Sk-1 , Hammer Cross Pin 200 Gram With Handle Netco Make , Bosch GSS140 electric Oribtal Sander , TOOL KIT BAG As per sample , Industrial uniform - Safety Apron - as per sample

Description: Cond. Uniform Items [1] Trouser T/cot. White 1.20 Mts- 982 Nos, [2] Trouser T/cot. Nave Blue 1.20 Mts- 771 Nos, [3] Trouser T/cot. Black 1.20 Mts-921 Nos, [4] Trouser T/cot. Oxford Blue 1.20 Mts- 34 Nos, [5] Trouser T/cot. Dark Grey 1.20 Mts- 4798 Nos, [6] Trouser Drill Dark Grey 1.20 Mts- 348 Nos, [7] Shirt T/cot. White H/s 2 Mts- 592 Nos, [8] Shirt T/cot. White F/s 2.25 Mts- 693 Nos, [9] Shirt T/cot. P/p H/s 2 Mts- 29 Nos, [10] B/shirt T/cot White H/s 2 Mts- 49 Nos, [11] B/shirt T/cot White F/s 2.25 Mts- 76 Nos, [12] B/shirt T/cot Fawn H/s 2 Mts- 45 Nos, [13] Coat T/cot Blue- 287 Nos, [14] Red Blouse For L/ptr- 10 Nos, [15] Saree T/cot Brown- 99 Nos, [16] Saree Master Colour With Border- 117 Nos, [17] Colth T/cot White- 22 Nos, [18] Coat Blue Serge Sup L/pattern 1.75 Mts- 124 Nos, [19] Trouser Blue Serge Sup 1.25 Mts- 944 Nos, [20] Coat Sky Blue Serge Sup 1.75 Mts- 260 Nos, [21] Coat White Serge Ordy 175 Mts- 15 Nos, [22] Trouser Blue Serge Ordy 1.25 Mts- 73 Nos, [23] Coat Dark Grey Serge Ordy 1.75 Mts- 18 Nos, [24] Trouser Dark Grey Serge Ordy 1.25 Mts- 22 Nos, [25] Coat Dark Grey Serge Sup 1.75 Mts- 407 Nos, [26] Trouser Dark Grey Serge Sup 1.25 Mts- 502 Nos, [27] Red Angola For L/ptr- 117 Nos, [28] Umbrella- 5 Nos. Total Qty- 01 By Lot.

Description: BOQ ITEMS: Providing, installation, testing & commissioning of LED Totem pole sign board suitable for working on 220 V, 50 Hz single phase A/C supply. The display shall be made up of A.C.P. sheet (Aluminium Composite Panel) 3 mm thick of required colour and support frame of MS welded structure made out 40mm x 40mm x l.5 (NS) square pipe section with welded vertically and honzontally in regular interval with double pipe frame shall be covered from back and sides with 3mm thick ACP sheet the front facia shall be covered by ACP alongwith the letters and all the side i/c wiring the entire board with suitable size of power cable for power LED, the A.C.P. sheet shall have router cutting letters for the given matter in Hindi & English both languages and 2 & 5 mm thick acrylic sheet (NS) with the help of laser cutting of logo and letters shall be fitted inside the board for making the letters visible from outside etc. Providing inside the letter power LED modules each consisting of 3 Nos. LED of 1.14 watt, 90 lumen per watt, 12 volt, shall be fixed in such a way to give uniform bright light to the characters and 120 modules per SMPS of 400 watt capacity with inbuilt protection to make the light disturbance free. (aprox height of board 12 feet) including complete connection testing etc as required. , Fabrication, providing, welding & fixing of MS frame work made out of angle iron/ MS tube/ MS channel complete with welding and one coat of red oxide and two or more coats of approved synethic enamel paint etc. as required., Supplying and installation following size of PVC boxes IP 65, made out of poly cabrbonate outdoor installtion, weather proof, shock proof having provision for cable entry with 32 amps SP MCB, operation of manual automatic timer of 3 kw for led board and suitable connector for receiving cable with suitable mounting arrangements etc. complete as required. (a). 350 x 270 x 190 including complete connection testing etc as required., Supplying and lying of one number PVC insulated and PVC sheathed/ XLPE power aluminum armoured cable of 1.1 KV grade of following size on wall surface as required (a). 3 x 10 sq mm, Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC shealhed/ XLPE aluminum armoured cable of 1.1 KV grade as required. (a). 3 x 10 sq. mm (22mm) DSR_2022 (9.1.7)

Details: Lifting And Packing For Regrading The Existing Psc Sleeper Track To Required Height / level In Stages Not Exceeding 75mm Or Part Thereof At A Time, Providing Permissible Ramp For The track, Insertion Of Moorum / Sand / Stone Ballast Uniformly Under The Existing Track And Placing The same To Safe Approved Gradient, Gauge, Cushion Including Levelling And One Round Of Through Packing to Allow Train Movement At Restricted Speed Of 30 Kmph For A Specified Length With All Leads & Lifts and Fixing, Marking, Painting Rail Level Pegs At Every 30m Interval. Note: Lifting Of Track Shall Be Done in Stages As Per Procedure Prescribed In Latest Edition Of Irpwm To Get The Proposed Final Level As Per approved Working Profile, As Directed By Engineer In-charge.

Description: CATEGORY: M S HEXONAL BOLTS 16 X 65 MM F T , 3501520 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 12 X 75 MM F T , 3501522 M S HEXONAL BOLTS 16 X 50 MM F T , 3501528 M S HEXONAL BOLTS 16 X 75 MM F T , 3501530 M S HEXONAL BOLTS 10 X 50 MM F T , 3501531 M S HEXONAL BOLTS 10 X 65 MM F T , 3501532 M S HEXONAL BOLTS 10 X 100 MM F T , 3501543 M S HEX BOLT and NUTS FULL THREAD 20 X 100 MM , 3501544 M S HEX BOLT and NUTS FULL THREAD 12 X 100 MM , 3501099 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 6 X 25 MM F T , 3501002 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 6 X 50 MM F T , 3531010 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 9 X 200 MM H T , 3531011 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 16 X 175 MM H T , 3501553 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 16 X 200 MM H T , 3501111 M S HEXONAL BOLTS CONFORMING TO IS 1364 PART 1 and HEXAGONAL NUTS CONFORMING TO IS 1364 PART 3 HAVING MECHANICAL PROPERTY CLASS FOR BOLTS AS 4 point 6 AND NUTS AS 4 OF SIZE 12 X 175 MM H T , 3501550 M S HEX BOLT and NUTS 20 X 75 MM , 3522005 HEXAGONAL HEAD G I BOLT AS PER IS 1364 GI NUT AS PER IS 1367 HOT DIP GALVANISED AS PER IS 2629 WITH UNIFORM ZINC COATING OF SIZE 10 X 50 MM F T , 3522094 TW MAKE G I HEXAGONAL BOLT WITH NUTS M 20 X 100 MM HALF THREAD