Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Water Supply Scheme Under Jjm Of Sepahijala District. / Sh Construction Of 1 No 20,000 Gallon Capacity Rcc Under Ground Reservoir With Pump House, Installation Of Pump - Motor, Laying Of Distribution Pipe Line Including Construction Of 4 Nos in Sepahijala, Tripura. The bid opening date for this tender is 14-05-2025 and the last date for bid submission is 05-06-2025. Interested bidders for Public Works Department tender can download the important documents here to check the tender amount, scope of work, eligibility criteria and technical requirements.
Public Works Department - PWD Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date14 May 2025
Closing Date5 Jun 2025
Tender AmountRefer Documents
Costs
EMD
₹ 98,196Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Water Supply Scheme Under Jjm Of Sepahijala District. / Sh Construction Of 1 No 20,000 Gallon Capacity Rcc Under Ground Reservoir With Pump House, Installation Of Pump - Motor, Laying Of Distribution Pipe Line Including Construction Of 4 Nos
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEDWS_61328_1Tender No
74/EE/DWS/BLG/2025-26Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
6.86
1177
8076.278
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
6.86
10570
72514.316
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
14.63
12073
176639.694
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing
and reinforcement-
14.378
13305
191310.79239999998
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,
staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
13.27
13584
180266.315
... More
Centering shuttering including struttings, propping etc. and removal of form work for: Walls (any thickness) including attached pilasters,buttresses, plinth and string courses etc. using shuttering
ply
142.78
496
70833.15800000001
... More
Suspended floors, roofs, landings, balconies and accessplatform with 12 mm thick shuttering ply
27.33
729
19937.234999999997
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
24.15
499
12060.509999999998
... More
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
22.9
647
14825.46
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
6340.5
103
658777.9500000001
... More
First class brick work in foundation and plinth including cost of all materials as required complete. In cement mortar 1:4 ( 1 cement : 4 fine sand ).
0.126
9845
1240.4952
... More
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
4.33
11410
49406.1227
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand )
18.04
1533
27664.34
... More
Cement concrete flooring 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
12.19
631
7691.889999999999
... More
12 mm cement plaster of mix. In cement mortar 1:4 ( 1 cement : 4 fine sand )
312.08
224
69968.336
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:cement mortar 1:4 ( 1 cement : 4 fine sand )
22.87
260
5959.9220000000005
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-
4.92
4711
23181.564
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
100
146
14619.999999999998
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275gm/m2
24.34
859
20929.966
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. New work ( two or more coats applied @ 3.84 kg/10 sqm
44.02
94
4177.4980000000005
... More
Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : i) New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer
applied @ 2.20 kg/10 sqm)
49
160
7884.1
... More
Neat cement Punning
241.93
56
13741.624
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work
9.84
106
1051.896
... More
Providing and placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge. (i).150mm dia
6
1777
10666.2
... More
Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer - in - charge. (i)100mm dia
402.6
477
192160.98
... More
Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer-in-charge. i) From 100 mm dia pilot hole to 300 mm bore hole.
402.6
529
213297.47999999998
... More
Providing & lowering of UPVC pipe as per IS 12818 after washing of the bore hole by manual means, disposal of the bore hole by manual means as per specification and direction of the Engineer-in-charge. (A) CM casing pipes
-
-
-
... More
125 mm dia
146.4
954
139753.44
... More
100mm dia
109.8
607
66714.48
... More
B). "RS" pipe (i). 100mm dia
146.4
951
139241.04
... More
Washing and developing of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer - in - charge.
402.6
47
18922.2
... More
Providing fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer in charge. (ii).125X100mm dia
4
1008
4032
... More
Providing fixing of UPVC end cap / well suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer in charge. (i).100mdia
4
560
2240
... More
Providing and shrouding of deep tube well assembly with washed pea gravels (2.0 - 4.75 mmeffective size) as per specification(IS:4097) and direction of the Engineer - in - charge. With Contractor's rig
1) Pea gravels obtained from Durgapur, West Bengal.
15.16
15523
235328.68
... More
Providing earthing with perforated 40mm dia G.I. Pipe (Medium class) (12mm dia perforation), laying of 40mm dia G.I. Wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with salt and charcoal / coke in alternate layers of 300 mm, as per standard specification and direction of the Engineer-in-charge.i) For single phase connection with 2.50 mtr. Long G.I.pipe
4
15286
61146.8
... More
Providing and fixing of housing clamp ( made with12mmthick MS sheet ) along with well cap (made with 10 mmthick MS sheet ) with necessary arrangements for SBDTW as per specification and direction of the Engineer - in - charge. (i).125mm dia
4
3692
14769.2
... More
Supplying and fitting fixing of submersible pump of 2000/3000 GPH capacity, 60 mtr. Head with motor of required capacity single phase in/c 40 mm dia 30.00 mtr. Heavy duty G.I. Pump assembly and reducing socket, delivery band 90 degree non-return valve and fitting etc. as per direction of the Engineer-in-charge.
4
23980
95920
... More
Supplying & fitting of panel box of MS sheet with locking arrangement comprises with starter, main switch, busier ammeter, Volt meter, , selector Switch etc. inside the box including service connection within 50.00 mtr. length from L.T line with roof for rain water protection and 4 (four) Nos. stand by R.C.C work in all respect as per direction of the Engineer - in - charge.
4
4500
18000
... More
Excavating trenches of required width for pipes, cables etc. in/c excavation for sockets and dressing of sides, where required ramming of bottom, depth up to 1500 mm ( Slope 1 in 200) in/c getting out the excavated soil and backfilling of soil as required after laying of pipe line, in layer not exceeding 200mm in depth in/c consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed with all required lead as per Chapter-2 of CPWD specification & direction of the Engineer-in-Charge.
-
-
-
... More
A).For UPVC pipes in new work
a). in all kinds of soil i) For Pipes not exceeding 90 mm dia
1500
87
131400
... More
A).For UPVC pipes in new work
a). in all kinds of soil i). For pipes exceeding 90mm dia but not exceeding 300mm dia.
1500
106
159600
... More
B).For GI/CI/DI pipes in new work
a). in all kinds of soil
i). For pipes exceeding 90mm dia but not exceeding 300mm dia.
200
133
26760.000000000004
... More
Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification nd direction of the Engineer-in-Charge. i).150mm dia
12
185
2222.3999999999996
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
i.150mm dia. (PN-1.6)
3
8238
24715.800000000003
... More
ii.100mm dia. (PN-1.6)
3
5561
16683.300000000003
... More
iii.80mm dia. (PN-1.6)
3
4319
12959.099999999999
... More
Providing and fixing DI specials as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
A) DI all socketted bend 900 iii) 150 mm dia
2
3495
6990
... More
B) DI all socketted bend 450 iii) 150 mm dia
2
3418
6837
... More
C) DI all socketted bend 22.5 degree i).150mm dia
5
2601
13006
... More
D) DI all socketted TEE vi) 150 X 150 X 150 mm dia
3
5605
16816.800000000003
... More
E) DI Collar fiange socketted (i).150mm dia
3
3043
9131.400000000001
... More
F) DI flanged socketted tail piece (i).100mm dia
3
1861
5583.6
... More
iii) 80 mm dia
3
1649
4949.1
... More
iv) 150 mm dia
3
2617
7851
... More
G) DI flanged spigotted tail piece (i).100mm dia
3
2048
6146.700000000001
... More
ii).80mm dia
3
1648
4944.9
... More
iii).150 mm dia
3
3593
10779.599999999999
... More
Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge.i. 150 mm dia DI class K- 7 pipes.
100
2602
260200
... More
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge
a)150mm dia.
20
144
2890
... More
Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. i. 90 mm dia
8
148
1189.6
... More
ii. 110 mm dia
6
174
1047.6
... More
iii. 140 mm dia
4
250
1001.6
... More
Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. (i).90mm dia
10
298
2987
... More
ii. 110 mm dia
10
356
3564
... More
iii. 140 mm dia
10
466
4668
... More
Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS :14182 including testing of joints complete as pe CPWD specification and direction of the Engineer - in - charge. i. 90 x 90 mm dia
6
352
2113.2
... More
ii. 110 x 110 mm dia
6
580
3482.3999999999996
... More
iii. 140 x 140 mm dia
6
818
4908
... More
Providing, fixing and laying fabricated UPVC straight reducer conforming to IS : 10124 ( Part 3 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. i. 110 x 90 mm dia
5
321
1605.5
... More
ii. 140 x 110 mm dia
5
426
2134
... More
iii. 140 x 90 mm dia
5
395
1978.5
... More
Providing, fixing and laying flanged fabricated UPVC tailpiece with MS flange ( 8 mm thick ) conforming to IS : 10124 ( Part 6 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. (i).90mm dia
7
380
2666.2999999999997
... More
ii. 110 mm dia
7
515
3605.7000000000003
... More
iii. 140 mm dia
7
697
4883.2
... More
Making road crossing by horizontal boring for smooth laying of UPVC / CI / DI / GI pipes etc. of required dia complete as per specification and the direction of the Engineer-in-charge.
B. by manual means.
100
619
61929.99999999999
... More
Providing and fixing G.I. pipes medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer- in - charge. A) External works . i. 15 mm dia. nominal bore
150
254
38100
... More
ii. 40 mm dia. nominal bore
75
549
41182.5
... More
iii. 50 mm dia. nominal bore
25
653
16347.5
... More
Providing, fixing and laying rigid UPVC pipes conforming to IS :4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A. Class - 3 ( working pressure 6.0 kg / cm2)
-
-
-
... More
i. 40 mm OD
150
89
13470
... More
ii. 50 mm OD
1000
112
112800
... More
iii. 90 mm dia.
1000
271
271400
... More
iv. 110 mm dia
1000
372
372100
... More
Providing and laying of flexible PVC pipe (Conforming to IS:7634) complete as per specification and direction of the Engineer-in-charge (cost of earth work and fittings will be paid separately). i. 15 mm dia.
500
57
28650
... More
Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge.
1
9372
9372.4
... More
Providing and fitting fixing of pressure meter ( 0.0 - 14.0 Kg/sqcm.) as per relevant IS specification and the direction of the Engineer - in-charge.
1
878
878.2
... More
Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge. i. For 3-phase connection with 4.00 mtr. Long G.I. Pipe.
1
23655
23655.9
... More
prividing & fitting fixing of 5000 GPH x 76.00 mtr head water lubricated submersible pump of maximum 150 mm outer dia. With maximum 10(ten) stages coupled with required wet and non-over loading submersible motor suitable for 340-440 volts,3 phase, 50 Hz , ac supply and star delta method of starting along with 70.00 mtr. PVC insulated 3 core flat copper cable of 4.0 sqmm conforming to relevant IS code for submersible motor with all necessary equipments and fittings as required with suction case, strainer coupling key, vertical non-return valve cum discharge case as per direction of Rngineer-in-charge. (Duke/ Kirloskar/Calama make)
1
74561
74561.54
... More
Providing and fitting, fixing steel sheet enclosed switch fuse units (suitable for DIN fuse) triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havell’s /BCH make etc. complete as per specification and direction of the Engineer-in-Charge. i.100 amps
1
10274
10274.8
... More
Providing and fitting, fixing of Fully Automatic Star Delta type Motor starter (3 ph 50 Hz, 415V, ) in steel Sheet Enclosures with contractors and Timer etc. complete suitable for submersible Pump L & T, BCH , ABB make as per specification and direction of the Engineer-in-Charge. i .35 HP/26 KW Relay range within 20-32 + 10%.
1
27556
27556.4
... More
Fabrication of column pipe including providing & fitting fixing of G.I. flange by cutting the GI pipe into 3.05 mtrs. Size and welding the same with GI flange as per specification anddirection of the Engineer-in-charge ( G.I. pipe will be issued bythe Department at free of cost ). I ) For 100 mm dia G.I. pipe with 10 mm thick GI flange
2
5624
11249
... More
Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with battenholder complete as per specification and direction of theEngineer-in charge
1
267
267.5
... More
Providing and fitting fixing Single phasing preventorselectable under voltage +selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L & T/BCH/HAVELS iemens etc. make complete as perspecification and direction of the Engineer-in-charge.
1
2043
2043.2
... More
Providing and fitting fixing of moving iron type, Range 0-100/ 0-200 amps ,96mmX96mm size AC Amps meter direct reading type(L&T/AE make) with selector switch and CT coil as a electrical instrument of the panel board as per specification and direction of the Engineer-in-Charge.
1
1964
1964.8
... More
Providing and fitting fixing of moving iron type, Range 0-500 V, 96mmX96mm size AC Volt meter( L&T/ AE make) with selector switch as a electrical instrument of the panel board as per specification and direction of the Engineer-in-Charge.
1
1135
1135.3
... More
Providing and fitting fixing with PVC insulated single core Multi strand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. i. 16 sqmm
30
394
11844
... More
Providing and fixing C.I. non-return valve of approved quality as per of CPWD specification and direction of the Engineer - in - charge.
i).100mm nominal bore.
1
7504
7504.9
... More
Providing & fitting fixing of G.I. flange ( 10 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge. i. 100mm dia.
20
495
9906
... More
Providing and fixing G.I. bend / elbow in the pipe line in/c testing of joints complete as per CPWD specification and direction the Engineer-in-charge. i) 15 mm Dia
100
104
10480
... More
Providing and fixing G.I. union as per CPWD specification and direction of the Engineer-in-charge. i)15 mm Dia
100
131
13100
... More
Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer-in-charge. i)15 mm Dia
100
78
7859.999999999999
... More
Providing and fitting fixing PVC / plastic bib cock conforming to IS : 9763 in hydrant points at different location as per specification & direction of the Engineer-in-charge. (i) 15mm dia PVC/ Plastic bib cock
100
119
11940
... More
Providing and fixing G.I. nipple of medium class as per CPWD Specification and direction of the Engineer-in-chargei) 15 mm dia 150 mm long
100
68
6859.999999999999
... More
Providing and fitting fixing brass ferrule with C.I cover conforming to IS-2692 in/c boring and tapping the main as per CPWD specification and direction of the Engineer-in-charge. i)10mm nominal bore.
100
358
35840
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements