Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Strengthening Of Veterinary Health Care Infrastructure Through Construction Of Veterinary Sub-centre At Manik Bandar Under Durgachoumuhani R,d. Block, Dhalai District During The Year 2024-25 in Dhalai, Tripura, with an estimated contract value of Rs. 16,38,789. The bid opening date for this tender is 10-06-2025 and the last date for bid submission is 01-07-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 32,776Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Strengthening Of Veterinary Health Care Infrastructure Through Construction Of Veterinary Sub-centre At Manik Bandar Under Durgachoumuhani R,d. Block, Dhalai District During The Year 2024-25
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPWD_62530_1Tender No
36/EE/PWD(RnB)/KMP/DIV/24-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
11.084
1177
-
... More
SUB-HEAD : CEMENT CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level.
-
-
-
... More
1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
2.657
9960
-
... More
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
5.39
10570
-
... More
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
0.25
11355
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
16.9
894
-
... More
SUB-HEAD : RCC WORK
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level:
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
8.965
12073
-
... More
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
1.848
11693
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
2.194
13305
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
2.377
13584
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
972.19
103
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
437.24
103
-
... More
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening
cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.50 mm thick
1.5
1481
-
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
Foundations, footings, bases for columns etc. for mass concrete with 12 mm timber plank
17.16
333
-
... More
Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
13.024
729
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
52.46
499
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
53.95
625
-
... More
Edges of slabs and breaks in floors and walls above 20 cm. wide
2.274
121
-
... More
Weather shade, Chajjas, corbels etc., including edges.
5.1
531
-
... More
SUB-HEAD : BRICK WORK
-
-
-
... More
First class brick work in foundation and plinth including cost of all materials as required complete:-
-
-
-
... More
In cement mortar 1:4 ( 1 cement : 4 fine sand).
4.787
9845
-
... More
In cement mortar 1:6 ( 1 cement : 6 fine sand).
3.251
9515
-
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ).
79.67
1533
-
... More
Extra for providing & placing in position 2 nos 6mm dia MS bars at every 6th course of full brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ).
79.67
749
-
... More
SUB-HEAD : WOOD & PVC WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Local Teak Wood
0.434
106388
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
9.03
3720
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to openings /wooden frames with rawl plugs screws etc.
272.82
169
-
... More
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size).
24
190
-
... More
Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete :
-
-
-
... More
125 × 90 × 4.00 mm
18
66
-
... More
100 × 75 × 3.50 mm
6
55
-
... More
Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :
-
-
-
... More
300 x 20 x 6 mm
6
100
-
... More
250 x 20 x 6 mm
2
82
-
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
250x10 mm
6
119
-
... More
200x10 mm
2
103
-
... More
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
125 mm
6
68
-
... More
100 mm
2
60
-
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.Single rubber stopper.
4
45
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).
4
943
-
... More
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
4
1243
-
... More
Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
10
592
-
... More
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).
3.36
3658
-
... More
Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
4
1327
-
... More
SUB-HEAD : STEEL WORK
-
-
-
... More
Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
5
192
-
... More
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.
232.47
142
-
... More
Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design.
28
103
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes.
1079.7
146
-
... More
Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:- G.I. pipes
3.6
173
-
... More
SUB-HEAD : ALUMINIUM WORK & STRUCTURAL GLAZING
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
-
-
-
... More
For fixed portion of approved quality:-
-
-
-
... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
22.95
474
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):-
-
-
-
... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
20.4
555
-
... More
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
11.05
1161
-
... More
Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-incharge:- 205 x 19 mm
2
363
-
... More
SUB-HEAD : FLOORING AND SKIRTING WORK
-
-
-
... More
Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer in-charge.
-
-
-
... More
Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles
-
-
-
... More
600 mm x 600 mm in all shades and designs 1st class quality ceramic floor Porcelain tiles.
26.533
1177
-
... More
Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge.(i) 450 mm X 300 mm in all shades and design.
9.144
927
-
... More
Providing and fixing Precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning etc. all complete as per direction of Engineer-in-charge. In dark shade using ordinary cement
6.885
834
-
... More
Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineerin- charge.40 mm thick with 20 mm stone aggregate.
9.615
614
-
... More
SUB-HEAD : ROOFING AND CEILING WORK
-
-
-
... More
Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge. 0.50 mm thickness.
71.98
939
-
... More
Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side etc. complete as per direction of Engineer-in-charge. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling /self tapping screws
with EPDM washers complete for Ridges/Valley/Gutter/Flashing of width 610mm:0.50 mm thickness.
18.14
517
-
... More
Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked in ceiling with necessary nails etc. complete as per direction of Engineer-in-charge. (frame work to be paid separately):12 mm thick.
26.688
853
-
... More
SUB-HEAD : FINISHING WORK
-
-
-
... More
12 mm cement plaster of mix.
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 fine sand)
43.075
224
-
... More
Cement mortar 1:6 (1 cement : 6 fine sand)
123.218
205
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:Cement mortar 1:6 (1 cement : 6 fine sand)
87.78
237
-
... More
6 mm cement plaster of mix :Cement mortar 1:3 (1 cement : 3 fine sand)
21.536
185
-
... More
Net cement punning
43.075
56
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats) over and including water thinnable priming coat with cement primer.
136.816
120
-
... More
Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats applied @ 3.84 kg/10 sqm).
91.07
78
-
... More
Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
-
-
-
... More
With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ).
20.318
48
-
... More
With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel galvanised iron/
steel works
22.735
42
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work.
43.053
106
-
... More
SUB-HEAD : SANITARY WORK
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete
including cutting and making good the walls and floors wherever required :White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
1
5680
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid.
1
5373
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.
2
1307
-
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 630x450mm.
3
1706
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe 32 mm dia
3
108
-
... More
Flexible pipe 32 mm dia
3
126
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia.
3
1200
-
... More
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
3
850
-
... More
Providing and fixing toilet paper holder : C.P. brass.
1
636
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width78mm and effective height of 88mm, weighing not less than 190gms.
3
521
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
3
99
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water soil, waste & vent pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:Single socketed pipe - 110 mm OD
30
375
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.110mm
20
237
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
... More
Coupler 110 mm
5
135
-
... More
Single equal tee without door 110x110x110mm
2
238
-
... More
Single equal tee with door 110x110x110mm
2
240
-
... More
Bend 87.5° 110mm
5
151
-
... More
Plain shoe 110mm
5
131
-
... More
Terminal guard 110 mm
2
69
-
... More
SUB-HEAD : WATER SUPPLY
-
-
-
... More
Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. Internal work - Exposed on wall.
-
-
-
... More
15 mm dia. nominal bore
8
292
-
... More
20 mm dia. nominal bore
5
359
-
... More
25 mm dia. nominal bore
15
470
-
... More
Making connection of G.I. distribution branch with G.I. main following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
25 to 40 mm nominal bore
3
570
-
... More
Providing and fixing brass bib cock of approved quality :15 mm nominal bore.
2
374
-
... More
Providing and fixing brass stop cock of approved quality :15 mm nominal bore.
2
374
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):25 mm nominal bore.
1
637
-
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
... More
25 mm nominal bore. Vertical
1
680
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
500
12
-
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work.
-
-
-
... More
15 mm dia. nominal bore
8
12
-
... More
20 mm dia. nominal bore
5
14
-
... More
25 mm dia. nominal bore
15
18
-
... More
Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality :
-
-
-
... More
15 mm dia. nominal bore
8
8
-
... More
20 mm dia. nominal bore
5
10
-
... More
25 mm dia. nominal bore
15
12
-
... More
SUB-HEAD : SEWAGE AND DRAINAGE WORK
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :150 mm diameter.
2.5
594
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design:150 mm diameter.
2.5
1677
-
... More
Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
1
7228
-
... More
SUB-HEAD : WATER SOURCE
-
-
-
... More
Charges for drilling and boring of pilot hole in any soil strata by water jet or any suitable method including collection of sample at various suitable levels and preservation of samples in polythene bags/sample boxes and disposal of execess soil or mud and maintain the pilot hole properly and required staging as per specification (IS : 2800) and direction of Engineer-in-charge: 40 mm dia.
69
282
-
... More
Charges for reaming of pilot hole in any soil strata by water jet or any suitable method and disposal of execess soil or mud including the cost for materials as required to maintain the pilot hole properly and required staging as per specification of the Engineer-in-charge. 40 mm to 100 mm dia.
69
259
-
... More
Providing, fitting, fixing of bottom Cap (UPVC) as per specification and direction of the Engineer-in-charge. 100 mm NB.
1
349
-
... More
Providing, fitting, fixing and lowering UPVC "CM" casting pipe as per IS : 12818 for Mark II/III/OHP as per specification and direction of the Engineer-in-charge. 100 mm NB.
39
604
-
... More
Providing, fitting, fixing and lowering UPVC ribbed screen pipes as per IS : 12818 for Mark II/III/OHP as per specification and direction of the Engineer-in-charge. 100 mm NB.
24
946
-
... More
Providing, fitting, fixing and lowering UPVC ribbed screen pipes as per IS : 12818 for Mark II/III/OHP as per specification and direction of the Engineer-in-charge. 40 mm NB.
4
307
-
... More
Providing and fitting fixing G.I pipes (medium class) conforming to IS : 1239 for OHP of approved of quality as per specification and direction of the Engineer-in-charge. 40 mm dia.
18
753
-
... More
Providing and fitting fixing shallow well hand pump (CI) No-6 (90 mm) as per specification and direction of the Engineer-in-charge. 40 mm dia.
1
5145
-
... More
Charges for threading of G.I pipes as per chapter-20 of CPWD specification and direction of the Engineer-in-charge. 40 mm dia pipe.
1
105
-
... More
Charges for development of ordinary hand tube well by pumping out the turbid water till clean sand free water is direction of the Engineer-in-charge.
1
1797
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%