Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Construction Of Sedimentation Tank, Clear Water Reservoir, Hrf Cum Ssf, Raw Water Pump House, Providing Pipeline And Other Allied Works At Kumardhan Para Of Balaram Vc Within The Jurisdiction Of Ambassa Rd Block Under Dws Sub-division, Ambassa in Dhalai, Tripura. The bid opening date for this tender is 21-05-2021 and the last date for bid submission is 14-06-2021. Interested bidders for Public Works Department tender can download the important documents here to check the tender amount, scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 85,773Document Cost
₹ 2,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_CEDWS_19486_1Bid Award Id
ViewTender No
92/SE/DWS/C/AMB/2020-21Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
iv) 50X40 mm
10
-
198.2
... More
I). D.I. Double Socketted tapper
150 x 125/100 mm dia
(Bend for Areator to sedimentation tank and taper for scour line)
1
-
2078.4
... More
iii)40 mm dia
20
-
281.8
... More
50 mm dia
4
-
383.4
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
11.5
-
810.5
... More
A) Foundations, footings, bases for columns etc. for mass concrete with timber plank
6.36
-
268.9
... More
vi) 80x65 mm
5
-
337.3
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD
specification and direction of the Engineer - in - charge.
-
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete.
49.28
-
37.5
... More
a) In all kinds of soil
i) for pipes not exceeding 90 mm dia
500
-
65.3
... More
Foundations, footings, bases for columns etc. for mass concrete with timber plank
5.18
-
268.9
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
0.57
-
12104.7
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
6.4
-
887.5
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
6.1.3) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
0.47
-
8888.4
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
Providing and fixing DI specials as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
17.6
-
385.2
... More
(v) 65 mm dia
20
-
641
... More
12 mm cement plaster of mix
-
-
-
... More
In walls (any thickness), including attached pilasters, buttresses, piers, abutments etc.
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
13.63
-
11791.9
... More
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
1.77
-
10456.6
... More
100 mm dia
5
-
1645.7
... More
5.8.3 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
20.91
-
370
... More
iv). 200 mm dia
5
-
4492.6
... More
Providing and fixing in position 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide sufficiently long at the top and bottom respectively, channels & with bolts, nuts, rivets, locking arrangement, stoppers, handles, hold fast including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
4.92
-
4159.3
... More
Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge.
i) 100 amps
1
-
8390.2
... More
Providing and fixing of CI non-return valve of approved quality as per chapter clause 201 of CPWD and as per direction of Engineer in charge.
-
-
-
... More
Providing and fixing DI specials as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
150 mm dia
6
-
141.8
... More
Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.
10.5.1) 40mm thick.
14.63
-
526.4
... More
iv)80 mm dia
2
-
537.6
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
ii) 25 mm dia.
50
-
56
... More
150 mm dia
5
-
141.8
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.
5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more
850
-
78.2
... More
A) External work.
xi). 150 mm dia. nominal bore
12
-
1890.5
... More
12.5 Neat cement punning
195.18
-
45.1
... More
Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge.
2
-
954.8
... More
iii. 125 mm dia Ductile Iron Class K-7 pipes
22
-
1735.4
... More
iv). 150 mm dia A) PN - 1.6
2
-
6967.3
... More
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing and placing of anthracite coal ( 3 mm to 6 mm) of SP gr. 1.4 in IRP as per specification & direction of the Engineer-in-charge.
1.5
-
31531.9
... More
5.8.1.1 Foundations, footings, bases for columns etc. for mass concrete with timber plank
48.51
-
268.9
... More
5.20.4 Thermo-Mechanically Treated bars of grade Fe-500D or more
2500
-
78.2
... More
5.9.3) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
11.72
-
370
... More
Providing and fixing in position 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide sufficiently long at the top and bottom respectively, channels & with bolts, nuts, rivets, locking arrangement, stoppers, handles, hold fast including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
4.92
-
4159.3
... More
(i) 15mm dia 75mm long
20
-
50.2
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
6 mm cement plaster of mix :
a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
21.43
-
144.5
... More
i). 150 mm dia
2
-
716.2
... More
First class brick work in foundation and plinth including cost of all materials as required complete:-
-
-
-
... More
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
52.77
-
1363.1
... More
Providing and fitting fixing of moving iron type, Range 0-100/0200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge.
2
-
1671.4
... More
Charges for making G.I. tail piece with MS flange ( 8 mm wall thickness ) at one end & threading at other end in/c. cutting, threading, welding & fitting, fixing as per specification and the direction of the Engineer-in-charge. ( G.I. pipes will be supplied from the department free of cost ).
-
-
-
... More
Charges for cutting D.I. pipe with steel saw by manual means as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
4.1.14) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)
4.93
-
8075.6
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-All kinds of soil
90
-
134.9
... More
Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge..
1
-
7847.4
... More
Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete.
56.88
-
37.5
... More
12.4.1 Cement mortar 1:3 (1 cement : 3 fine sand)
45.49
-
144.5
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
5.1.2) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
6.17
-
10974.6
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.
-
-
-
... More
5.9.4.2) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
17.52
-
539
... More
ii. 40 mm OD.
200
-
72.8
... More
Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 5.2.2.2) .1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
2.15
-
11791.9
... More
i. 15x15x15 mm dia
5
-
107.8
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including
disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-All kinds of soil
51.66
-
134.9
... More
Supplying & installation of submerssible pump with suitable motor upto the depth of 80 ft to 100 ft by 65 / 80 / 100 / 125 mm dia GI pipe welded with GI flange in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run as per direction of the Engineer-in-charge ( pump, motor with cable, 65 / 80 / 100 / 125 mm dia GI pipe for assembly will be issued by the Department at free of cost ).
i. 2500 GPH Capacity 100.00m head
2
-
86877
... More
First class brick work in foundation and plinth
including cost of all materials as required complete:-
6.1.5) In cement mortar 1:4 ( 1 cement : 4 fine sand )
4.65
-
8888.4
... More
vi)80 mm dia
5
-
1593.1
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:
-
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank
32.4
-
483
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
7.17
-
10974.6
... More
Providing & fixing GI Nipple of medium class as per chapter 20 of CPWD specification and direction of Engineer in charge.
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
4.1.13) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size)
2.26
-
9872.1
... More
II)-Sub Head:- Construction of Sedimentation tank (10000 Gallon)
-
-
-
... More
External work. 50 mm dia. nominal bore
60
-
515.8
... More
Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil
2.13.1) By manual means
36.94
-
169.5
... More
12.1.2) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
1.89
-
174.8
... More
Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
150 mm dia
22
-
150.8
... More
All work upto plinth level: 4.1.5 )1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
3.85
-
9872.1
... More
B). D.I. all socketted Bend 45 degree
iii) 150 mm dia
2
-
2594.4
... More
6 mm cement plaster of mix :
-
-
-
... More
Providing and fitting fixing of moving iron type, Range 0-100/0200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge.
2
-
1671.4
... More
iv) 50 mm dia nominal bore
1250
-
515.8
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.
5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more
700
-
78.2
... More
Providing and placing rapid gravity filter sand having effective size of 0.50 mm to 1.00 mm & uniformity co-efficient of not more than 1.70 and or less than 1.30 obtained from Barakar river West Bengal as per specification and the direction of the Engineer - in - charge.
13.3
-
22694.5
... More
xi). 150 mm dia
2
-
1987.4
... More
Providing & fitting fixing GI flanged(10mmwall thickness) by welding with GI-MS pipe and placning position as per direction of the Engineer in charge.
-
-
-
... More
5.2.2.1) 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
0.87
-
13581.9
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing
and reinforcement-
-
-
-
... More
i.10 mm nominal bore
20
-
296.3
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
ii) 100 mm dia
5
-
75.6
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
3.78
-
887.5
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
91.56
-
539
... More
50 mm dia
2
-
417.7
... More
5.20.4 Thermo-Mechanically Treated bars of grade Fe-500D or more
2408.05
-
78.2
... More
Providing and fixing G.I. pipes medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc.complete as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
a)with first class brick
2
-
18371.2
... More
Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the mEngineer - in - charge.
-
-
-
... More
i) 25x15 mm
5
-
109.7
... More
(iii) 40 mm dia
20
-
301.2
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
12.1
-
385.2
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
9.12.1) Hot finished welded type tubes
402
-
122.9
... More
4.3.1) Foundations, footings, bases for columns.
1.2
-
238.6
... More
Providing & fixing bruss ferrule with CI cover conforming t0 IS:2692 in/c boaring and taping the main as per chapter 20 of CPWD specification and direction of Engineer in charge.
-
-
-
... More
i)15 mm dia
50
-
90.2
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
-
-
-
... More
VII) Sub Head:- RCC TRAY AREATOR (5000 GPH CAPACITY)
-
-
-
... More
12.4.1) In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
134.55
-
144.5
... More
All work upto plinth level: 5.1.2 )1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
6.15
-
10974.6
... More
(c) 50 mm dia.{P.N-1.0}
2
-
2882.5
... More
V)-Sub Head:- Clear Water PUMP HOUSE, ELECTRICAL & MECHANICAL WORKS
-
-
-
... More
Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
38.42
-
82.8
... More
A) D.I. all socketted Bend 90 degree
iii) 150 mm dia
2
-
2652
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
-
-
-
... More
Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge.
2
-
954.8
... More
Neat cement punning.
62.33
-
45.1
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil
10.44
-
120.3
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
'-All kinds of soil
6.13
-
120.3
... More
v) 65x50 mm
10
-
251.5
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
-
-
-
... More
Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.67 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
81.21
-
119.4
... More
Providing and fixing G.I. Full way valve as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
Providing & fixing of GI socket as CPWD specification & direction of incharge.
-
-
-
... More
(b) 65 mm dia.{P.N-1.0}
2
-
3074.9
... More
Making road crossing by horizantal boaring for smoothly lating of UPVC/CI/DI/GI pipe etc of requiered dia complete as per specification &direction of the Engineer in charge.
-
-
-
... More
ii)25 mm dia
20
-
133.1
... More
Providing and fixing DI specials as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
D.I. all socketted Bend 90 degree
100 mm dia
2
-
1645.7
... More
B) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
146.44
-
370
... More
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
2.46
-
887.5
... More
i)40 mm dia
2
-
374.8
... More
ii) 25 mm dia nominal bore
50
-
313.2
... More
Lettering with black japan paint of approved brand and manufacture on new work.
1000
-
2.8
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil
39.63
-
169.5
... More
Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design.
9.48
-
76.5
... More
Providing and fixing DI specials as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.
i) 16 sqmm
30
-
256
... More
D.I. Flanged Spigotted tail piece
150 mm dia
5
-
2726.5
... More
Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
iii)65 mm dia
2
-
486.2
... More
Foundations, footings, bases for columns etc. for mass concrete with timber plank
3.5
-
268.9
... More
Charges for laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. (ii) 100 mm dia
30
-
104.3
... More
100 mm dia. PN - 1.6
5
-
4559.7
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge.
1
-
212.8
... More
Lettering with black japan paint of approved brand and manufacture on new work
1000
-
2.8
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement-
-
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
56.88
-
203.4
... More
ii). 150 mm dia
36
-
116
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
(iii) 80 mm dia.
1
-
3346.9
... More
iv) 100 mm dia
7
-
75.6
... More
5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more
780
-
78.2
... More
ii). 150 mm dia
4
-
116
... More
Excavation trenches of required width for pipes etc. including excavation of sockets, dressing of sides where required, ramming of bottom, depth up to 1500 mm (slope-1 in 200) including getting out the excavated soil and backfilling of soil as required after laying of pipelines in layer not exceeding 200 mm in depth in/c consolidating each deposited layer by ramming, watering etc. & disposing of surplus excavated soil with all required leads as per chapter-2 of CPWD specification & direction of the Engineer in charge.
A. For UPVC pipes in new work
-
-
-
... More
6 mm cement plaster of mix :
In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
137.84
-
136.9
... More
Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil
26.42
-
120.3
... More
Providing and laying cement plaster skirting upto 300 mm height with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) finished with a floating coat of neat cement including rounding of junctions etc. complete.
10.13.1) 18 mm thick
14.6
-
352.4
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
0.51
-
887.5
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
11.1.2) 0.63mm thick with zinc coating not less than 275gm/m2
43.31
-
859.9
... More
12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand ) in single layer :12.16.3) Raised Band
8
-
4.4
... More
(i) 15mm dia
20
-
98.5
... More
Foundations, footings, bases for columns etc. for mass concrete with timber plank
5.4
-
268.9
... More
Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.
i) 16 sqmm
30
-
256
... More
Providing & fixing of GI union joints as per CPWD specification and direction of Engineer in charge
-
-
-
... More
Providing and fixing C.I. non-return valve of approved quality as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing & fixing GI reducer in the pipeline including testing of joints complete as CPWD specification & direction of incharge.
-
-
-
... More
6 mm cement plaster of mix :
a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
16.66
-
144.5
... More
Providing and fixing DI specials as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
(a) 80 mm dia.{P.N-1.6}
2
-
3417.6
... More
1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)
3.78
-
8075.6
... More
50 mm dia
10
-
127
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
All Kind of Soil. By menual Means
19.23
-
169.5
... More
Providing & fixing GI bend/elbow in the pipeline including testing of joints complete as CPWD specification & direction of incharge.
-
-
-
... More
First class brick work in foundation and plinth
including cost of all materials as required complete:-
6.1.5) In cement mortar 1:4 ( 1 cement : 4 fine sand )
4.98
-
8888.4
... More
Finishing walls with textured exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.28 kg/10 sqm) over and including base coat water proofing cement paint applied @ 2.20 kg/10 sqm complete.
41.32
-
190.9
... More
100mm dia
5
-
1412.8
... More
v) 65 mm dia nominal bore
1500
-
655.5
... More
i) 80 mm dia
100
-
352.2
... More
12 mm cement plaster of mix a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
73.98
-
174.8
... More
50 mm dia
5
-
383.4
... More
A) D.I. all socketted Bend 90 degree
ii) 100 mm dia
2
-
1645.7
... More
Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.
Iv) 63-80 Amps
1
-
4298.4
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. [Payment shall be made after submission of Test Certificate issued by theManufacturer]
49.28
-
49.7
... More
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-
6.3.3) In cement mortar 1:4 (1 cement : 4 fine sand ).
8.25
-
10136.49
... More
i) 15 mm dia.
50
-
42.7
... More
v)65 mm dia
20
-
985
... More
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
i. 50 mm OD.
300
-
92.5
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
100
-
7
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
8.7
-
11791.9
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
8.46.1) Fixed to steel windows by welding
22
-
122.3
... More
Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design.
1000
-
2.9
... More
Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge..
1
-
7847.4
... More
B)By manual means
30
-
466.8
... More
iii) 40x15 mm
5
-
146.6
... More
Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge.
ii) for 3-phase connection with 4.00 mtr. Long G.I. pipe
1
-
18492
... More
Neat cement punning.
28.63
-
45.1
... More
Providing and laying of flexible PVC pipe (conforming to IS:7634) complete as per specification and direction of the Engineer - in - charge (cost of earth work and fittings will be paid separately).
-
-
-
... More
Half brick masonry work with first class bricks in foundation and plinth including cost of all materials asrequired complete:-6.10.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ).
8.1
-
1187.9
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.
-
-
-
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
VI)-Sub Head:- LAYING & DISTRIBUTION OF PIPELINE
-
-
-
... More
v. 65x65x65 mm dia
5
-
538.2
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-
-
-
... More
6 mm cement plaster of mix :
-
-
-
... More
50 mm dia
9
-
127
... More
IV) Sub Head:- RAW WATER PUMP HOUSE, ELECTRICAL & MECHANICAL WORKS
-
-
-
... More
Weather shade, Chajjas, corbels etc., including edges
3.6
-
417.7
... More
Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge.
1
-
212.8
... More
5.1.1) 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
1.8
-
12460.6
... More
5.3.2.1) 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
5.88
-
13894.7
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
0.79
-
12104.7
... More
150 mm dia
198
-
150.8
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
66.78
-
1363.1
... More
i)15 mm dia
20
-
68.8
... More
Charges for laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
7.91
-
385.2
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
49.28
-
203.4
... More
ii. 25x25x25 mm dia
5
-
181.1
... More
(i) 50 mm dia.
1
-
2888.8
... More
iv). 150 mm dia
8
-
116
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
3.85
-
887.5
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
(i) 15 mm dia.
20
-
87.7
... More
Providing and laying cement plaster skirting upto 300 mm height with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) finished with a floating coat of neat cement including rounding of junctions etc. complete.
10.13.1) 18 mm thick
14.6
-
352.4
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-All kinds of soil
260
-
134.9
... More
12.4.2 Cement mortar 1:4 (1 cement : 4 fine sand)
195.18
-
136.9
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 5.2.2.2) .1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
1.35
-
11791.9
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. [Payment shall be made after submission of Test Certificate issued by theManufacturer
56.88
-
49.7
... More
ii). 100 mm dia
8
-
75.6
... More
iii. 40x40x40 mm dia
5
-
243.1
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
3.57
-
13581.9
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
6.83
-
887.5
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
24.27
-
810.5
... More
iii) 50 mm dia
100
-
264.5
... More
vi. 80x80x80 mm dia
5
-
707.2
... More
D.I. Flanged Socketted tail piece 150 mm dia
2
-
1986.1
... More
Neat cement punning.
40.45
-
45.1
... More
I)-Sub Head:- HRF cum SSF(Capacity = 1500ltr/Hour)
-
-
-
... More
4.1.3 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
5.4
-
10456.6
... More
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-
6.3.3) In cement mortar 1:4 (1 cement : 4 fine sand ).
5.08
-
10136.49
... More
5.8.6.4 Circular Columns with ply shutters
4.81
-
559.1
... More
Charges for cutting D.I. pipe with steel saw by manual means as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge.
i) 100 amps
2
-
8390.2
... More
Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design.
9.48
-
76.5
... More
6 mm cement plaster of mix :
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil
52.08
-
169.5
... More
D.I. all socketted Bend 90 degree
150 mm dia
5
-
2652
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement
-
-
-
... More
ii) 40x25 mm
5
-
148.9
... More
Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank
28.16
-
483
... More
v. 200 mm dia
2
-
176.2
... More
Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.
300
-
82.3
... More
Constructing masonry chember 120x120x100 cm , inside with brick work in cement mortar 1:4(1cement:4fine sand) for sluice valve, with CI surface box 100 mm top diameter, 160 mm bottom dia and 180 mm deep (inside)with chian lead and RCC top slab 1:2;4 mix(1cement:2fine sand:4 graded stone aggregate 20mm nominal size) necessary excavating foundation concrete 1:5:10(1cement:5fine sand:10 graded stone 40 mm nominal size) and inside platering with cement mortar 1:3(1cement:3fine sand) 12 mm thick finishing with a floating coat of neat cenet complete as per standard degine, CPWD specification and direction of the Engineer-in-charge.
-
-
-
... More
Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.
Iv) 63-80 Amps
2
-
4298.4
... More
12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand ) in single layer :
12.16.3) Raised Band
8
-
4.4
... More
i) 200 mm dia
7
-
189
... More
5.1.1) 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
8.03
-
12581
... More
iv. 50x50x50 mm dia
5
-
334.3
... More
Providing and fixing G.I. pipes of Heavy class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
ii) 150 mm dia
7
-
141.8
... More
Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
III)--Sub Head:- Construction of Clear Water Reservior
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil
31.32
-
169.5
... More
D.I. Flanged Spigotted tail piece
150 mm dia
2
-
3409.6
... More
i) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
7.13
-
9872.1
... More
Supplying & installation of submerssible pump with suitable motor upto the depth of 80 ft to 100 ft by 65 / 80 / 100 / 125 mm dia GI pipe welded with GI flange in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run as per direction of the Engineer-in-charge ( pump, motor with cable, 65 / 80 / 100 / 125 mm dia GI pipe for assembly will be issued by the Department at free of cost ).
i. 5000 GPH Capacity 100.00m head
2
-
105577
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
8.46.1) Fixed to steel windows by welding
22
-
122.3
... More
Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil
2.13) By manual means
9.13
-
169.5
... More
5.20.4 Thermo-Mechanically Treated bars of grade Fe-500D or more
2500
-
78.2
... More
Finishing walls with textured exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.28 kg/10 sqm) over and including base coat water proofing cement paint applied @ 2.20 kg/10 sqm complete.
52.6
-
190.9
... More
Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. complete as per specification and direction of the Engineer-in-charge. i). 5-15 kVAr 440 V
1
-
572.7
... More
Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.
10.5.1) 40mm thick.
26.81
-
526.4
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
iv. 150 mm dia Ductile Iron Class K-7 pipes
44
-
1981.7
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-All kinds of soil
51.66
-
134.9
... More
iv)50 mm dia
20
-
402.5
... More
iv). 150 mm nominal bore
1
-
8930.5
... More
Providing and placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge.
i) 150 mm dia
6.3
-
1414.3
... More
Foundations, footings, bases for columns etc. for mass concrete with timber plank
5.4
-
268.9
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. '-All kinds of soil
12.31
-
120.3
... More
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone
aggregate 20 mm nominal size)
5.61
-
9872.1
... More
Charges for laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. complete as per specification and direction of the Engineer-in-charge. i). 5-15 kVAr 440 V
1
-
572.7
... More
D.I. Flanged Socketted tail piece
100mm dia
2
-
1412.8
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
11.1.2) 0.63mm thick with zinc coating not less than 275gm/m2
26.95
-
859.9
... More
(vi) 80 mm dia
10
-
757.1
... More
iii. 125 mm dia
4
-
79.5
... More
Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.
ii) 35 HP/26 kw Relay range within 20-32 + 10%
1
-
22522.8
... More
50 mm dia
4
-
417.7
... More
Neat cement punning.
137.84
-
45.1
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
9.12.1) Hot finished welded type tubes
165
-
122.9
... More
(ii) 65 mm dia.
1
-
3117.8
... More
Providing and placing filter gravel having effective size of 3.00 mm to 25 mm & uniformity co-efficient of not more than 1.70 and or less than 1.30 obtained from Barakar river, West Bengal as per specification and the direction of the Engineer - in-charge.
11.19
-
23842.6
... More
(iv) 50 mm dia
20
-
383.4
... More
150 mm dia. PN - 1.6
2
-
6967.3
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
-
-
-
... More
(ii) 25mm dia
10
-
167
... More
External work. 50 mm dia. nominal bore
50
-
515.8
... More
(ii) 15mm dia 225mm long
20
-
58.6
... More
vi) 80 mm dia nominal bore
1500
-
808.2
... More
ii)50 mm dia
2
-
417.7
... More
v. 200 mm dia Ductile Iron Class K-7 pipes.
11
-
2551.2
... More
100 mm dia.PN - 1.6
2
-
4559.7
... More
B) For G.I. / C.I. / D.I. pipes in new work
a) In all kinds of soil
ii). For pipes exceeding 90 mm dia but not exceeding 300 mm dia
99
-
99.8
... More
150 mm dia. PN - 1.6
5
-
6967.3
... More
Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.
200
-
82.3
... More
Providing and fixing G.I. Full way valve as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
ii. 100 mm dia Ductile Iron Class K-7 pipes.
44
-
1417.2
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
Finishing walls with textured exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.28 kg/10 sqm) over and including base coat water proofing cement paint applied @ 2.20 kg/10 sqm complete.
33.89
-
190.9
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
100
-
7
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
-
10
... More
5.3.1.1) 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
2.19
-
13894.7
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
5.22
-
12104.7
... More
ii). 100 mm dia
5
-
75.6
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
181.42
-
370
... More
Constructing masonry Chamber 90 x 90 x 100 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer- in - charge.
A). With First class bricks
2
-
14128.5
... More
Weather shade, Chajjas, corbels etc., including edges
2.25
-
417.7
... More
Providing & fixing CI bibcock (long handle) as per chapter 20 of CPWD specification and direction of Engineer in charge.
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
5.1.2) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
5.76
-
10974.6
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:
-
-
-
... More
ii) 65 mm dia
150
-
308.3
... More
100 mm dia.
5
-
1555.3
... More
Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.
i. 25 HP/18.5 kw Relay range within 13-21 + 10%
2
-
14320
... More
Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.67 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
61.34
-
119.4
... More
Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge.
ii) for 3-phase connection with 4.00 mtr. Long G.I. pipe
1
-
18492
... More
Providing & fixing GI full way valve as per CPWD specification & direction of the Engineer in charge.
-
-
-
... More
iii) 40 mm dia nominal bore
250
-
432.5
... More
i) 15 mm dia nominal bore
50
-
197.5
... More
Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
Providing & fixing GI pipes medium class as per IS 1239 with latest ammedment complete GI fitting in/c trenching & refilling cutting & making good the well etc. complete sa per CPWD specification & direction of the Engineer in charge.
A. External Work
-
-
-
... More
Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
38.42
-
82.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements