Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Fdr/restortn Dtw Schm Undr Dws Sd-ii Wthin Mtb Rd Blck/ Sh- Improvmnt Wtr Quality By Repairng Exixting 10,000/7,500/5,000 Gph Cpcity Irp During The Year 2024-25. (gr-ii) in Gomti, Tripura, with an estimated contract value of Rs. 24,23,207. The bid opening date for this tender is 28-05-2025 and the last date for bid submission is 12-06-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 48,464Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Fdr/restortn Dtw Schm Undr Dws Sd-ii Wthin Mtb Rd Blck/ Sh- Improvmnt Wtr Quality By Repairng Exixting 10,000/7,500/5,000 Gph Cpcity Irp During The Year 2024-25. (gr-ii)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEDWS_62000_1Tender No
28/EE/DWS/DIVN/UDP/2025-26Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://pwd.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
PRESS NIeT. NO. 03/EE/DWS/DIVN/UDP/2025-26 Dated. 22-05-2025
BOQ Items
... More
Providing and fitting fixing of water pressure meter (0.0-14.0kg/sqcm) as per relevant IS specification and the direction of the Engineer-in-Charge.
6
621
-
... More
Providing and fitting fixing of MS flange (8mm wall thickness) by welding with GI/MS pipe & placing position as per IS specification and the direction of the Engineer-in-Charge. i) 150mm dia
15
324
-
... More
Rewinding of Horizontal motor suitable for centrifugal pumps by complete dismentalling providing & rewinding with super enamelled copper conductor ( as per IS : 13730 part-3 ) conducting necessary spare parts & reassembling the same including servicing of rotor & necessary trail run as per specification and direction of the Engineer-in-charge. i)0.5 -1.5 HP (Metering pump)
2
1898
-
... More
ii) 2.0 -3.0 HP (Compressor)
5
2640
-
... More
iii) 3.0-5.0 HP (Air Blower)
5
4108
-
... More
Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-incharge. i) 32 amps
11
5266
-
... More
ii) 63 amps
2
6123
-
... More
Providing and fitting fixing with PVC insulated single core multistrand copper cable conforming to IS: 694 inter connection with all electrical equipments of the panel boards as per specification and direction of the Engineer-in-charge. i) 10 sqmm
110
269
-
... More
ii) 16 Sqmm
30
394
-
... More
Providing and fitting fixing of moving iron type, Range 0-500V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-incharge.
10
1135
-
... More
Providing and fitting fixing of moving iron type, Range 0-100/0- 200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge.
10
1964
-
... More
Providing and fitting fixing of electrical starter of approved quality for compressor, and agitator as per departmental sample demolishing the exsting damaged starter as per direction of the Engineer - in - charge.
10
2090
-
... More
Providing and fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in-charge. i)150 mm dia nominal bore
10
859
-
... More
Providing and fitting fixing M.S. clamp for hose pipes with nuts & bolts complete as per relevant IS specification and direction of Engineer-in-charge. i)150 mm dia nominal bore
10
191
-
... More
Providing and fixing CIDF Butterfly valve with bolts, nuts, rubber insertions etc. complete as per chapter 20 of CPWD specification and direction of the Engineer -in -charge. ( The tail pieces, tappers etc if required will be paid separately) I)150mm dia
16
19067
-
... More
Providing and fitting fixing of 6 feet X 4 feet X 1 inch thickness Gamair wood panel board for fitting fixing of electrical items, in/c 2 nos MS angle post (size 2 inch X 2 inch X 9 feet), nuts and bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting (1 feet X 1 feet X 2 feet) below the ground level and painting two or more coats and plastic paint as per specification and direction of the Engineer-in-charge.
5
9372
-
... More
Lifting of filter media from package type IRP filter chamber as per specification and the direction of the Engineer-in-charge.
10
1438
-
... More
Providing and placing of anthracite coal ( 3 mm to 6 mm) of SP gr. 1.4 in IRP as per specification & direction of the Engineer-in-charge.
5
35153
-
... More
Charges for spreading of filter media ( sand and gravel after proper cleaning and washing ) inside the package type IRP as per specification and the direction of the Engineer-in-charge. (excluding the cost of sand and gravel ).
8
2348
-
... More
Providing and placing rapid gravity filter sand having effective size of 0.50 mm to 1.00 mm & uniformity co-efficient of not more than 1.70 and or less than 1.30 obtained from Barakar river West Bengal as per specification and the direction of the Engineer - in - charge.
8
27122
-
... More
Providing and placing filter gravel having effective size of 3.00 mm to 25 mm & uniformity co-efficient of not more than 1.70 and or less than 1.30 obtained from Barakar river, West Bengal as per specification and the direction of the Engineer -in-charge.
6
28038
-
... More
Providing & placing of MNO2 (effective size 20 mm to 40 mm) inside the oxidation chamber after taking out the existing damaged MNO2 as per direction of the Engineer -in-charge.
120
36
-
... More
Applying priming coat with ready mixed redoxied zinc chromate primer of approed and manufeacturer on still galvnized iron/steel work
82
42
-
... More
Providing and fitting fixing of conical type strainer (PVC) of approved quality as per departmental sample after demolishing existing damaged strainer as per direction of the Engineer-in-charge.
700
28
-
... More
Opening the Iron Removal Filter and remove the old filter media scraping inside /outside cleaning properly, painting inside vide anti corrossive black bituminious tie paint and painting outside and fillinf iron removal filter with filter media, sand,gravel, anthracite. as required will be supplied by the dept. at free of cost complete as per direction of Engg- in charge.
5
2300
-
... More
Supply & fitting fixing of metering pump (SWELLORE) makle 50 ltr/hr capacity (max) 10 kg/cm2 PRESSURE COMPLETE AS PER DIRECTION OF THE Enginner-in-Charge.
4
37300
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
26.2
231
-
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
5.2
1177
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level: i)1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
3.8
9960
-
... More
ii) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 40 mm nominal size)
7.6
11078
-
... More
Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:-
(i) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
4.2
1436
-
... More
Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. (i) 40mm thick
72.6
614
-
... More
First class brick work in foundation and plinth
including cost of all materials as required complete:- 6.1.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ).
2.2
9845
-
... More
First class brick work in superstructure above plinthlevel & upto floor-five level including cost of all materials as required complete: 6.3.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ).
2
11410
-
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ).
94
1533
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more
824
103
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:--with cement mortar 1:3 ( 1 cement : 3 fine sand )
135
293
-
... More
Dismantling GS sheet roofing including ridges, hips,valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge.
38
92
-
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 11.1.2 0.63 mm thick with zinc coating not less than 275 gm/m2.
38
1205
-
... More
12 mm cement plaster of mix 12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand)
110
224
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix: 12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand)
125
260
-
... More
Neat cement punning.
42
56
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : 8.1.2 Karai wood
0.8
111635
-
... More
Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge. Gamair Wood 8.5.2.1 35 mm thick shutters
15
2751
-
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
115
94
-
... More
Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
12.39.1 New work ( two or more coats applied @ 3.84 kg/10 sqm)
120
78
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: 12.59.1 Two or more coats on new work
21
106
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%