Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Construction Of New Double Storied School Building At Baramoidan H.s. School Khowai Tripura Under Ridf Xxx During The Year 2024 25 Building Portion Including Internal Water Supply Sanitary Installation Sewage And Drainage Works in Khowai, Tripura, with an estimated contract value of Rs. 7,54,22,690. The bid opening date for this tender is 29-05-2025 and the last date for bid submission is 26-06-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 15,08,454Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPWD_62051_1Tender No
CE/Build/PWD/ ACE/ Project Unit/DNIT/14/2025-26Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil
320.82
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
-
-
-
... More
All kinds of soil
1510.25
-
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
201.6
-
-
... More
Extra for additional lift of 1.5m or part thereof.
-
-
-
... More
All kinds of soil
547.14
-
-
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
285.51
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
... More
Chlorpyriphos/Lindane emulsifiable concentrate of 20%
331.02
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion):
-
-
-
... More
(i) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
142.35
-
-
... More
(ii) Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
1026.9
-
-
... More
SUB-HEAD : CEMENT CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level:
-
-
-
... More
1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
181.3
-
-
... More
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
25.49
-
-
... More
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
11.1
-
-
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
Foundations, footings, bases for columns.
66.08
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
444.98
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
237.25
-
-
... More
SUB-HEAD : RCC WORK
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level:
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
531.26
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
148.38
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
600.04
-
-
... More
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
2.81
-
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
83867.6
-
-
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
118324.84
-
-
... More
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits
-
-
-
... More
50 mm thick
1.44
-
-
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size).
2.35
-
-
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
Foundations, footings, bases for columns etc. for mass concrete with timber plank
447.25
-
-
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
64.8
-
-
... More
Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
2516.1
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
2378.16
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
1767.76
-
-
... More
Stairs (excluding landings) except spiral-staircases with wooden plank
272.1
-
-
... More
Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.
218.4
-
-
... More
Edges of slabs and breaks in floors and walls under 20 cm. wide
822.5
-
-
... More
Weather shade, Chajjas, corbels etc., including edges.
275.68
-
-
... More
Providing and fixing in position 12mm thick bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints.
117.32
-
-
... More
Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall treatment.
-
-
-
... More
Aluminium fluted strips 3.15mm thick : 200 mm wide
39.6
-
-
... More
SUB-HEAD : BRICK WORK
-
-
-
... More
First class brick work in foundation and plinth including cost of all materials as required complete.
-
-
-
... More
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
89.76
-
-
... More
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
73.6
-
-
... More
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete.
-
-
-
... More
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
230.38
-
-
... More
Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-
-
-
-
... More
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
148
-
-
... More
Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
-
-
-
... More
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
2528.87
-
-
... More
Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:-
-
-
-
... More
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
2528.87
-
-
... More
SUB-HEAD : CLADDING WORK
-
-
-
... More
Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:-
-
-
-
... More
(i) 14 mm thick Granite of any colour and shade duly approved. - Area of slab upto 0.50 sqm.
24.32
-
-
... More
Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:-
-
-
-
... More
14 mm thick Granite work.
20
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and approved thickness fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work):-
-
-
-
... More
White Agaria Marble Stone of approved shade of 14 mm thick (75 x 50 cm).
10.8
-
-
... More
SUB-HEAD : WOOD WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
-
-
-
... More
Local Teak wood
4.42
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
175.14
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
-
-
-
... More
Fixed to openings /wooden frames with rawl plugs screws etc.
11896.5
-
-
... More
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size)
390
-
-
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
... More
300 x 16 mm
50
-
-
... More
250 x 16 mm
12
-
-
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
300 x 10 mm
100
-
-
... More
250 x 10 mm
24
-
-
... More
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
125 mm
100
-
-
... More
100 mm
24
-
-
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
... More
Single rubber stopper
50
-
-
... More
Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
100
-
-
... More
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in- charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).
33.6
-
-
... More
Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc.
6
-
-
... More
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
4
-
-
... More
SUB-HEAD : STEEL WORK
-
-
-
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
84
-
-
... More
Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
144
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
303
-
-
... More
SUB-HEAD : ALUMINIUM WORK
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
-
-
-
... More
(i) For fixed portion of approved quality:- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
3415.39
-
-
... More
(ii) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
2466.67
-
-
... More
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
-
-
-
... More
With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
474.36
-
-
... More
With float glass panes of 5.5 mm thickness ( weight not less than 13.50 kg / sqm )
6.3
-
-
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge:-
-
-
-
... More
255 x 19 mm
548
-
-
... More
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:-
-
-
-
... More
Anodised aluminium of grade AC 15.
12
-
-
... More
Providing and fixing 100 mm brass locks ( best make of approved quality ) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer-in-charge.
30
-
-
... More
SUB-HEAD : FLOORING AND SKIRTING WORK
-
-
-
... More
Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineer-in-charge.
-
-
-
... More
40mm thick.
24
-
-
... More
Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge.
-
-
-
... More
600 mm X 300 mm in all shades and design
836.4
-
-
... More
Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer in-charge.
-
-
-
... More
(i) Anti-skid Tiles - 300 mm x 300 mm in all shades and designs
30
-
-
... More
(ii) Mat Finish Tiles - 600 mm x 600 mm in all shades and designs 1st class quality ceramic floor Porcelain tiles
12
-
-
... More
Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 -2017, of approved make,in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etcall complete as per direction of the Engineer-in-charge..
-
-
-
... More
(i) Double charged Stainfree vitrified tiles (Glossy) - Size of tile 1200 mm x 600 mm
1566.72
-
-
... More
(ii) Glassed vitrified tiles (Mat Finih /Anti Skid) - Size of tile 1200 mm x 600 mm
707.28
-
-
... More
Providing and laying flamed finish Granite stone flooring with border in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc for Granite stone flooring complete in treads of steps and risers using single length upto 2.00 metre. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
14mm thick Granite stone Slab
320.85
-
-
... More
Extra for pre-finished nosing to treads of steps of Granite stone flooring
330
-
-
... More
Providing and fixing Precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning etc. all complete as per direction of Engineer-in-charge.
-
-
-
... More
In dark shade using ordinary cement
186.8
-
-
... More
Providing and fixing tactiles of standardized designs conforming to RNIB (The Royal National Institute for the Blind, UK), DETR (Department of the Environment, Transport and the Regions, UK) & ADA (Americans with Disabilities Act, USA) of size 300 x 300 mm in floors, (thickness to be specified by the manufacturer) specially designed to assist the visually impaired - “foot braille”, with water absorption less than 0.5%, of approved brand & manufacturer, laid on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) including grouting of joints etc. all complete as per direction of Engineer-in-charge. (Payment for grouting of joints to be made separately)
37.35
-
-
... More
80 mm thick factory made c.c. interlocking paver block of M-35 Grade Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:.
-
-
-
... More
80 mm thick factory made c.c. interlocking paver block of M-35 with approved colour, design and pattern.
202.8
-
-
... More
SUB-HEAD : ROOFING AND CEILING WORK
-
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
... More
Single socketed pipe - 110 mm OD
384
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
... More
(i) Coupler - 110mm
40
-
-
... More
(ii) Single equal tee without door - 110 x 110 x 110 mm
40
-
-
... More
(iii) Single equal tee with door - 110 x 110 x 110 mm
40
-
-
... More
(iv) Bend 87.5o - 110mm
40
-
-
... More
(v) Plain shoe - 110 mm
40
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
-
-
-
... More
110mm
340
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.
-
-
-
... More
100mm
20
-
-
... More
SUB-HEAD : FINISHING WORK
-
-
-
... More
12 mm cement plaster of mix
-
-
-
... More
In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
716.33
-
-
... More
In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
6396.96
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
-
-
-
... More
In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
2042.03
-
-
... More
6 mm cement plaster of mix:
-
-
-
... More
In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
3795.2
-
-
... More
Neat cement punning.
716.33
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
197.82
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
(i) New work ( two or more coats) over and including water thinnable priming coat with cement primer.
10435.87
-
-
... More
Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
(i) New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1798.32
-
-
... More
Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
... More
With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ).
161.39
-
-
... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
114
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: (i) Two or more coats on new work
275.39
-
-
... More
SUB-HEAD:WATER PROOFING WORK
-
-
-
... More
Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with :
-
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
45.64
-
-
... More
Cement mortar 1:4 (1 cement : 4 fine sand )
13.69
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound, as directed by Engineer-in-Charge and consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
110
-
-
... More
SUB-HEAD : SANITARY WORKS
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
... More
White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
20
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
6
-
-
... More
Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
... More
Range of four urinal basins with 10 litre white P.V.C automatic flushing cistern.
2
-
-
... More
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
2
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.
10
-
-
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:
-
-
-
... More
Flat back wash basin of size 550x400mm.
18
-
-
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
... More
(i) Kitchen sink without drain board - 610x460 mm bowl depth 200 mm.
1
-
-
... More
Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings:
-
-
-
... More
Size 600x450x200 mm.
1
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
(i) Semi rigid pipe - 32 mm dia
24
-
-
... More
(ii) Flexible pipe - 32 mm dia
22
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
15
-
-
... More
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
15
-
-
... More
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms
15
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.
-
-
-
... More
450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms
15
-
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
15
-
-
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):
-
-
-
... More
100 mm dia.
30
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
(i) Single socketed pipe - 110 mm
172
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
... More
(i) Coupler - 110mm
24
-
-
... More
(ii) Single pushfit Coupler - 110mm
24
-
-
... More
(iii) Single equal tee without door - 110 x 110 x 110 mm
24
-
-
... More
(iv) Single equal tee with door - 110 x 110 x 110 mm
24
-
-
... More
(v) Double equal junction of required degree without door - 110 x 110 x 110 mm
20
-
-
... More
(vi) Double equal junction of required degree with door - 110 x 110 x 110 mm
20
-
-
... More
(vii) Bend 87.5o - 110mm
24
-
-
... More
(viii) Plain shoe - 110 mm
24
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
(i) 110 mm
196
-
-
... More
Providing and fixing SS grabbars set for accessible toilets comprising of 4 No. Grabbars as specified:
(1 NO. wing grabbar + 1 NO. Lshaped grabbar + 2 No. straight grabbars= 1 typical set)
a) Swing grabbar (1 NO) Providing a S.S.304 SWING HANDICAP GRABBAR-700mm and of DIA:32MM and thickness 1.5 mm of the roved brand and make.
b) L shaped grabbar (1 NO) Providing S.S304 LSHAPED DISABLED GRABBAR of SIZE-600MM (H)X600MM(D) and 32MM DIA and thickness 1.5mm of the approved brand and make.
c) Straight grabbar (2 NO) Providing S.S.304 GRAB RAIL (600 MM), 32MM DIA and thickness 1.5mm of the approved brand and make.
1
-
-
... More
SUB-HEAD : WATER SUPPLY
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. - Internal work - Exposed on wall
-
-
-
... More
15 mm nominal outer dia .Pipes.
10
-
-
... More
20 mm nominal outer dia .Pipes.
10
-
-
... More
25 mm nominal outer dia .Pipes.
30
-
-
... More
32 mm nominal outer dia .Pipes.
40
-
-
... More
40 mm nominal outer dia .Pipes.
20
-
-
... More
50 mm nominal outer dia .Pipes.
20
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. - Concealed work including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia .Pipes.
30
-
-
... More
20 mm nominal outer dia .Pipes.
240
-
-
... More
25 mm nominal outer dia .Pipes.
10
-
-
... More
32 mm nominal outer dia .Pipes.
10
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. - External work
-
-
-
... More
15 mm nominal outer dia .Pipes.
15
-
-
... More
20 mm nominal outer dia .Pipes.
30
-
-
... More
25 mm nominal outer dia .Pipes.
30
-
-
... More
32 mm nominal outer dia .Pipes.
10
-
-
... More
40 mm nominal outer dia .Pipes.
30
-
-
... More
50 mm nominal outer dia .Pipes.
10
-
-
... More
Providing and fixing brass bib cock of approved quality :
-
-
-
... More
15 mm nominal bore
72
-
-
... More
Providing and fixing brass stop cock of approved quality :
-
-
-
... More
15 mm dia nominal bore
84
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
25 mm nominal bore
4
-
-
... More
40 mm nominal bore
4
-
-
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
... More
(i) 25 mm nominal bore - Vertical
4
-
-
... More
(ii) 40 mm nominal bore - Vertical
4
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
-
-
... More
Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1:4 (1 cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With Second Class bricks
5
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
-
-
-
... More
100 mm diameter
4
-
-
... More
SUB HEAD : SEWAGE AND DRAINAGE WORKS
-
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
1
-
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
6
-
-
... More
Supplying and installation of 2 H.P Mono block Pump 50x40 mm Suction and delivery pipe complete fabricated to C.0 base of standard size with holding down bolt with panel board, single phase connection motor and starter to main switch, indicator and earthening etc. complete as per direction of the Engineer-In-Charge (No additional cost for electrification upto main switch will be paid seperately) Measurement to be taken after successful operation of the Pump)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%