Karnataka Power Corporation Limited Tender Result

Dismantling of Turbine Bearing pads and bearing end covers. Transportation of bearing pads and end covers to firms works. Re babbitting of bearings and end covers at firms works. Inspection of re worked bearings and end covers at firms works, KPCL reserves the right Joint inspection of all the reworked materials at MGHE site by KPCL and acceptance of the same. Agency shall submit testing certificates pertaining to all the re work, confirming to the relevant standards before offering the bearings for joint inspection. Assembly and installation of complete bearing system. Any tools and tackles, mounting devices required for installation has to be organised by the successful bidder. However, special tools, mounting devices, measuring instruments, crane etc., will be provided by KPCL depending on the availability. All consumables along with minor spares required for the works is automatically covered under scope of work. Transportation of men and materials shall be arranged by the successful bidder. Bidders may visit the site before quoting to assess the actual work involved. Work shall be carried out according to safety norms and all the workmen and technical personnel involved in the erection work shall use personal protection safety equipments while working in the site. All Covid 19 related safety precautions laid down by KPCL is mandatory while executing the work. Power supply will be provided by KPCL for installation activity, to draw power is the responsibility of the firm. In view of ensuring the quality of work it is proposed to include following points in Scope of work UT and DPT shall be conducted on pads to check proper bonding. KPCL reserves the right to inspect the testing. Submission of test certificates. Testing by mechanical rotation, after building rated Generator voltage and in fully loaded condition. There should not be any oil leakage and the bearing temperatures shall be in tolerable limits. Testing shall be conducted as per KPCL norms. EOT crane and related tools like slings, d shackles will be provided for dismantling and erection activities. All the equipments handed over shall be returned in proper working condition. If the EOT crane, issued tools and tackles are damaged while using by the contractor same shall be repaired/replaced by the same brand and specification