Tender Results of Skill Development And Technical Education Department
Tender Results of Skill Development And Technical Education Department
Select Contract Period
2024 onwards
2022 onwards
All Time
Skill Development And Technical Education Department Tender Result
Goods
GEM
Result Stage: Awarded (AOC Available)
Sundergarh, Odisha
CATEGORY: HEAT RUN TEST KIT FOR 3-PHASE TRANSFORMER WITH
TEMPERATURE GUN , OIL CIRCUIT BREAKER , BUCHHOLZS
RELAY KIT , OVER CURRENT RELAY TESTING SYSTEM ,
EARTH FAULT TESTING SYSTEM , DC SHUNT GENERATOR
WITH CONTROL PANEL , SINGLE PHASE TRANSFORMER ,
PARALLEL OPERATION OF TWO SINGLE PHASE
TRANSFORMER , DC VOLTMETER 0-300V , DC VOLTMETER
0-600V , DC VOLTMETER 0-10V , AC VOLTMETER 0-300V ,
AC VOLTMETER 0-600V , AC VOLTMETER 0-10V , DC
AMMETER 0-1 A , AC AMMETER 0-1 A , AC AMMETER 0-100A
, AC WATTMETER 0-300 UPF , AC WATTMETER 0-300V LPF ,
AC WATTMETER 0-600 UPF , AC WATTMETER 0-600 LPF ,
POWER FACTOR METER , THYRISTOR REGULATED POWER
SUPPLY , 10MHz FUNCTION GENERATOR , POWER
ELECTRONICS TRAINER KIT , RLC RESONANCE TRAINER KIT ,
50Hz BAND WIDTH, 2CHANNEL DIGITAL STORAGE
OSCILLOSCOPE , ACTIVE FILTER TRAINER KIT , T AND PI
NETWORK TRAINER KIT , DIGITAL MULTIMETER , TWO PORT
NETWORK TRAINER KIT , CLAMP METER , HEAVY DUTY DRILL
MACHINE , DRILL BIT 4MM FOR WALL , DRILL BIT 4MM ,
DRILL BIT 6MM , CUTTER MACHINE , TRANSFORMER OIL
TEST KIT , 3-POINT STARTER , 4-POINT STARTER ,
TRANSFORMER 1KVA , DC GENERATOR
Contract Date26 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 57.5 Lac
Skill Development And Technical Education Department Tender Result
Goods
Machinery and Tools
GEM
Result Stage: Awarded (AOC Available)
Rayagada, Odisha
CATEGORY: Operation And Maintenance Of Lifts (Elevators) - Complete
System
Contract Date26 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 1.7 Lac
Skill Development And Technical Education Department Tender Result
Goods
Machinery and Tools
GEM
Result Stage: Awarded (AOC Available)
Mayurbhanj, Odisha
CATEGORY: Steel Rule with metric and British graduation , Try square ,
Caliper inside spring type , Caliper hermaphrodite spring
type , Caliper outside spring type , Divider spring type ,
Scriber , Centre punch , Screw driver , Chisel cold flat ,
Hammer ball peen With handle , File flat-second cut , File
flat smooth , File half round second cut , Hacksaw frame
fixed type , Safety goggles , dot punch , Steel rule
graduated both in matric and English unit , Straight edge
steel , Spirit level metal type-2 , Stud Extractor EZY - out ,
Combination Set , Micrometer outside , Micrometer inside
with extension rods. , Vernier caliper , Vernier height
gauges , Vernier bevel protractor Blade with Acute Angle
Attachment , Screw pitch gauge Metric , Wire gauge ,
Surface plate C.I or Granite with Stand and Cover , Universal
scribing block , V-Block pair with clamps , Angle plate ,
Punch letter set. , Punch number set. , Portable hand drill
Electric , Drill twist straight shank , Drill twist Taper shank ,
Taps and dies complete set in box. , Taps and dies complete
set , File knife edge smooth , File feather edge smooth , File
triangular smooth , File round second cut , File square
second cut , Feeler gauge , File triangular second cut. , File
flat second cut safe edge. , File flat bastard , File Swiss type
needle , File half round second cut. , File half round bastard.
, File hand second cut. , File round bastard. , File card wire
brush , Oil Can , Pliers combination insulated , Wooden
handle forged Soldering Iron copper bit. , Blow Lamp ,
Spanner- Double Ended , Spanner adjustable
Contract Date25 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 6.9 Lac
Skill Development And Technical Education Department Tender Result
Goods
Electrical Goods and Equipments...+1Electrical and Electronics
GEM
Result Stage: Under Evaluation
Baleshwar, Odisha
CATEGORY: 3- point D.C. Starter , 4- point D.C. Starter , A.C. Energy M
A.C. Series type Motor , A.C. Voltmeter M.I. analog, portabl
type housed in Bakelite case , AC Ammeter MI, analog, por
box type housed in Bakelite case , AC phase-wound slip rin
with starter switch , AC Squirrel Cage Motor with star delta
and triple pole iron clad switch fuse with Mechanical Load.
Starters , Brake Test arrangement with two spring balance
D.C. Compound Generator with control panel including fitt
rheostat, voltmeter, ammeter and breaker , D.C. Shunt Ge
with control panel , DC compound Motor with starter and s
DC Series Motor coupled with spring balance load , DC Shu
Motor , De soldering Gun , Diesel Generator Set star-delta
connections AC 3 phase , Digital I.C. Trainer , Digital Watt
Discrete Component Trainer
Contract Date23 Apr 2024
This is an estimated contract date, exact date may vary.
Contract AmountRefer Documents
Skill Development And Technical Education Department Tender Result
Goods
Textile, Apparel and Footwear
GEM
Result Stage: Awarded (AOC Available)
Bhubaneswar, Odisha
CATEGORY: Womens Dress From Size-10, Bust- 36.5, Waist-27.5, Hips
38.5, Half , Electric Automatic steam press Iron 3kw , Kids
Dress Form 8 years Bust- 27.5, Waist-22.2, Hips-27 Full,
Without Hand with Leg , Kids Dress Form 10 years Bust-
27.5, Waist-23.5, Hips-29 Full, Without Hand with Leg , Mens
Dress Form Size-42, Bust- 42, Waist-36, Hips-43 Half,
Detachable Arm without Leg , Measuring Tape 150 mm ,
Seam Ripper , Thimble , Tailors Card Scale Triangular ,
Tailors Square Plastic , French Curve Set of three , Thread
Cutter , Scale plastic 24 inch , Leg Shaper Wooden ,
Garment Hangers , Screw Driver Set , Waste Bin Small,
Medium, Big , Pattern Punch , Pattern Notcher , Pattern
Hanging Stand , Stand for hanging dresses
Contract Date23 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 4.8 Lac
Skill Development And Technical Education Department Tender Result
Goods
Software and IT Solutions
GEM
Result Stage: Awarded (AOC Available)
Malkangiri, Odisha
CATEGORY: Desktop Computers (Q2)
Contract Date23 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 28.5 Lac
Skill Development And Technical Education Department Tender Result
Goods
Machinery and Tools
GEM
Result Stage: Awarded (AOC Available)
Sundergarh, Odisha
CATEGORY: Knife Double Bladed Electrician , Steel Rule Graduated both
in metric and english unit , Out side Micrometer , Fuses ,
ELCB and RCCB , Various lamp , Safety Belt , Side cutting
plier , Bar Magnet horse shoes mag neddle mag , Wire
Stripper , Magger , Earth Tester , Steel rule , D C Regullated
power supply
Contract Date20 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 1.9 Lac
Skill Development And Technical Education Department Tender Result
Goods
Machinery and Tools
GEM
Result Stage: Awarded (AOC Available)
Sundergarh, Odisha
CATEGORY: MICROMETER OUTSIDE MESURMENT , ANALOGUE
MULTIMETER , SCRIBER , ENGINEERS RULE , PIERCING PLIER
WITH REVERSIBLE VALVE , STAKE DIFFERENT SIZE , PIPE
CUTTER MINIATURE , PYROMETER TEMP GUN , SEAL TYPE
COMPRESSOR NON INVERTER , CONDENSING UNIT , OPEN
TYPE COMP
Contract Date20 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 1.9 Lac
Skill Development And Technical Education Department Tender Result
Goods
Textile, Apparel and Footwear
GEM
Result Stage: Awarded (AOC Available)
Sundergarh, Odisha
CATEGORY: Screwdriver Set , Measuring Tape 150 CM , Thimble Iron ,
Seam Ripper 4 Inch , Pinking Shears , Garments Hangers
Plastic , Rubber Mat , Dummy Ladies , Dummy Gents ,
Hanger Stand , Electric Automatic Press iron , Electric Press
iron
Contract Date20 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 68.7 K
Skill Development And Technical Education Department Tender Result
Goods
Machinery and Tools
GEM
Result Stage: Awarded (AOC Available)
Sundergarh, Odisha
CATEGORY: steel rule , scriber , hammer ballpein with handle , dot
punch , vernier caliper mitutoy , vernier height gauge
mitutoy , number punch , letter punch , tap and die , drill bit
, lathe cutting tool , bench drilling machine , portable hand
drill machine , power hacksaw , angle cutter
Contract Date20 Apr 2024
This is an estimated contract date, exact date may vary.
Contract Amount₹ 1.9 Lac
211-220 of 2323 active Tender Results