Telangana State Industrial Infrastructure Corporation Limited Tender

NP4 pipe line;RR masonry in CM(1:3) prop. using hard granite stone from approved quarry including cost and conveyance of all materials to site, all labour charges for dressing stones to required size and shape, mixing of cement mortor, stone wall construction, curing, etc. complete for finished item of work, excluding GST & Seignoriage Charges, as per MORTH Specification 1400 & 2200 (5th revision)

NP4 pipe line;Construction of un-reinforced dowel jointed at expansion and construction joint only, plain cement concrete pavement M30 (Grade) over a prepared sub base, coarse and fine aggregates conforming to IS : 383, Crushed stone aggregate of 25mm and 12.5mm size graded as per table 1500.1, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design with minimum cement content of 350 kg/cum laid in alternate panels with approved fixed side formwork of steel channel, wedges, steel plates including levelling the formwork as per drawing, cleaning the surface with air compressor initially and finally, laying and fixing of 125 micron thick approved polythene film made of 100% virgin LDPE, laying and spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation to lines and grade, curing of concrete slabs for 14- days including cost, and conveyance of all material, labour charges for all operations, all taxes, hire and operational charges of all T&P, diversion of traffic etc. complete for finished item of work as per drawing and Technical Specification Clause 1501 MORD. (except GST & Seignoriage

NP4 pipe line;Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam specification including cost & conveyance of all material, hire and operational charges of T&P, labour charges for all operations, premixing the material with water at OMC in mechanical mix plant, carriage of material by tipper to site, laying in uniform layers with paver finisher in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density, including lighting, grading, barricading and maintenance of diversion of traffic, etc., complete for finished item of work, as per table 400.13 of technical specification clause 406 MORTH(5th Revision). Except GST& Seigniorage charges,

NP4 pipe line;Providing Granular Sub Base using HBG crushed close graded material confirming to grading -I of MoRTH table - 400.1 (50% of 53mm to 9.5mm , 20% of 9,5 to 2.36mm and 30% of 2.36mmm below)including spreading the HBG material in layers of uniform thickness not exceeding 150mm thick with motor grader on prepared surface, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density complete as per technical specification as directed by the Engineer-in-charge etc, including cost and conveyance of HBG material, water etc to site, labour charges for all operations, all incidentals hire & operational charges of roller and other T&P etc,, complete for finished item of work as per MoRT&H (5th Revision) Specification 401.excluding GST & Seignoriage Charges

NP4 pipe line;Supply and Delivery, fixing of 1000 mm dia NP4 R.C.C. Socket and Spigot pipes conforming to B.I.S. 458/2003 at exfactory (rate per meter of effective length) including cost and conveyance of pipes to site, labour chares for lowering, laying pipes & jointing including cost of jointing materials, curing charges, all taxes, except GST, Hire and Operatinal charges of T & P required etc., complete for finished item of work as directed by the Engineer-in-Charge.

NP4 pipe line;Laying Plain Cement concrete (1:4:8) Prop using 40mm size HBG machine crushed stone aggregate confirming to table 1000-1 and fine aggregate conforming to table 1000-2 of MORT&H specification including cost, conveyance of all materials (viz) cement, stone aggregate, sand, water etc., to site, labour charges for all operations, machine mixing, laying, finishing smooth to required level, curing, all other incidental and operational charges etc, complete for finished item of work as per MORT&H specification 2100 (5th revision) and as directed by the Engineer-in-charge , excluding GST & Seignoriage Charges, for foundations.

NP4 pipe line;Conveyance of un use full dumping materials of 5km for transportation of materials by tipper/truck including loading, unloading, all labour charges, hire charges of T&P, complete excluding GST

NP4 pipe line;Excavation for roadwork/ Removal of debris/ High Berms on sides of roads in soil with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m, all taxes except GST as per MORTH - 301.(pipe portion)

NP4 pipe line;BT- Cutting

NP4 pipe line;Cutting Road surface including breaker charges, labour charges, operational and incidental charges, all taxes etc., except GST, complet for finished item of work - CC Cutting

NP4 pipe line;Removal of wet silt and sludge from sullage drains with aid of baskets and vessels, etc with intial lift of 3M and lead of 50m including labour charges, all taxes complete for finished item of work