Telangana State Education Women And Infrastructure Development Corporation Tender

Building work;Student Steel chair: (Specification) Overall Size of Sheet : 500mm (W) x 400 mm (D) x Back Height 900 mm (H). With sheet height (SH) 560 mm. The Seat and back shall be. CR sheet perforated of 1.6 mm. thickness. Chair, Legs and supports made of 25.04 mm CR Tubes 2.00mm thickness With arms PVC politic handle. Shoes: These shall be manufactured from pvc/hard rubber bush. Nominal height of The shoe shall be 35mm. Out side dimensions of 3 mm. Painting Process All MS Parts the metal components of the product should undergo following methods: 8 tanks Phosphating system with Epoxy Powder coated 50 to 60 Microns.

Building work;Office Table Big size: DIMENSIONS: 1450 W x 680 D x 750 H (In millimetres) MATERIAL: a) PLB/PLT - Top 25 mm thicknes b) All PLB and PLT (Pre laminated twin) is of following grade. c) Grade II Type II - Designation - PLB-22 (As per IS: 12823 - 1990) Each PLB/PLT may contain following material layers: a) Particle board, top with 2mm thick hot pressed PVC beading with keyboard moulded type. b) Under structure: This table should be Square CR tube 30 x 30 under structure with Prime Quality C.R steel square tube 1.22mm Thickness. c) Storage: 3 Draw & 2 Draw Metal is provided for storage. One side 2 Draw and other side 3 Draw Metal shall be provided. d) Drawer: Box-Box-File: dimensions 390 W X 430 H X 560 D mm, Construction & Material: Welded Assembled, CRCA as per IS-513. Back, Sides, Top & Bottom, Box 0.6 Think. Drawer Tray & Front - 0.8 mm. CRCA as per IS-513. Drawer slides used must be of Heavy Duty Telescopic channels. e) All steel metal components are manufactured from finest quality steel, which conforms as per IS-513 Grade D, DD. f) All Steel tubes used for desk under structures are as per IS-3601 ? 1984, IS-7138-1973, IS-4923-1985. g) Shoes: These shall be manufactured from hard rubber or PVC and shall be uniform in texture and chemically inactive to the action of mild acids. The nominal height of the shoes, shall be 35mm.

Building work;Student ? Hostel - cot (Specification) Over all dimensions of Cot of size top frame (Sheet) shall be Length: 1900mm, Width: 900mm and Height: 450mm with bushes. The Bed Frame shall we made of CR sheet 4 ? side bending size 50x20mm. Top sheet 1.50mm thickens. The bed frame shall be made from C.R. Sheet double bend. It should be reinforcement with three formed channels to the size 20x50x50x50x20 mm of 1.25mm thickness Flanges welded inside the length wise within gap 5 inches. A). Bow should be CR Tubes 38.10 mmX1.60mm.thickness. B). Cross Tubes, CR Tubes 28.10mmX1.60mm. Thickness. C). Filling Tubes, CR Tubes 19.05mmX1.25mm ? 3 no?s thickness. The MS Flat for top bending inside all four sides of size 50X3mm thickness with wire. Filling Tubes: The three vertical filling tubes shall be welded to the cross to be and to the bow. They should be spaced at regular intervals. The height of the head end bow shall be about 650mm. Filling Tubes: The three vertical filling tubes shall be welded to the cross to be and to the bow. They should be spaced at regular intervals. The height of the foot end bow shall be about 770mm. Shoes: These shall be manufactured from pvc/hard rubber bush. Nominal height of The shoe shall be 35mm. Outside dimensions of 3 mm. Painting Process all MS Parts the metal components of the product should undergo following methods: 8 tanks Phosphating system with Epoxy Powder coated 50 to 60 Microns.

Building work;Student Visitor chairs ? 3 seaters ( Specification) Over all Dimensions: Length Of Chairs 1700 mm x 500 mm (w) x 400 (d) x back Height 800 mm(H), sheet height 460, Legs and Supports shall be 40 x 40 square CR tube wall thickness 1.6mm. Top Two Cross Support 40X40 Sq Pipe 2mm thickness. Seating system connected with oval type tube (size-25 mm with wall thickness of 1.6 mm for extra strength and correctly fitted, welded and perfectly aligned connecting the two tube making one single frame, /packed with high quality of virgin protecting the frame form catching rust. Seat and Back: Ergonomically designed (Size: 500X400X760) made of Per fitted sheet with thickness of 1.2 mm with seat of 4 side covered with 25 mm bend and properly welded round tube on all the 4 and provided with 4 Legs 40 x 40 square pipe with full length 2- vertical 1- horizontal support 16 mm thickens. Shoes: These shall be manufactured from pvc/hard rubber bush. Nominal height of The shoe shall be 35mm. Out side dimensions of 3 mm. Painting Process All MS Parts the metal components of the product should undergo following methods: 8 tanks Phosphating system with Epoxy Powder coated 50 to 60 Microns.