Panchayat Raj Engineering Department Tender

Road works;Supply, delivery and fixing of HYSD bars including overlaps including cost and conveyance of material and labour charges etc., complete.

Road works;Vibrated Reinforced cement concrete M20 Grade Concrete using 20mm and 10mm size HBG crushed stone aggregate (Course aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) and conveyance of all materials to site and all labour charges, centering, machine mixing, laying in position, Compacting. Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete for cover slab over drain.

Road works;Construction of un-reinforced, expansion and construction joint plain cement concrete pavement, thickness as per design, over a prepared base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to IS: 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete

Road works;Construction of Granular sub-base by providing HBG material confirming to Grading VI of MoRT&H (Table 400-1 & 400-2) including cost, and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix-in-place method with rotavator / approved means at OMC and compacting with vibratory roller to achieve CBR value minimum of 30% at 98% of dry density and PI value maximum 6, complete for finished item of work as per MoRT&H Specification 401 (5th revision) including contractors profit & Over head charges excluding Seignarage charges etc.

Road works;Construction of Granular sub-base by providing HBG material confirming to Grading VI of MoRT&H (Table 400-1 & 400-2) including cost, and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix-in-place method with rotavator / approved means at OMC and compacting with vibratory roller to achieve CBR value minimum of 30% at 98% of dry density and PI value maximum 6, complete for finished item of work as per MoRT&H Specification 401 (5th revision) including contractors profit & Over head charges excluding Seignarage charges etc.

Road works;Providing Plain Cement Concrete (1:3:6) mix using 40mm size HBG crushed stone aggregate and fine aggregate (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying. Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work Bed for foundation.

Road works;Providing PCC M15 mix using 40mm, 20min & 10mm size HBG crushed stone aggregate and fine aggregate(Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying. Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for foundation

Road works;Construction of Granular sub-base by providing HBG material confirming to Grading VI of MoRT&H (Table 400-1 & 400-2) including cost, and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix-in-place method with rotavator / approved means at OMC and compacting with vibratory roller to achieve CBR value minimum of 30% at 98% of dry density and PI value maximum 6, complete for finished item of work as per MoRT&H Specification 401 (5th revision) including contractors profit & Over head charges excluding Seignarage charges etc.

Road works;Construction of Granular sub-base by providing HBG material confirming to Grading VI of MoRT&H (Table 400-1 & 400-2) including cost, and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix-in-place method with rotavator / approved means at OMC and compacting with vibratory roller to achieve CBR value minimum of 30% at 98% of dry density and PI value maximum 6, complete for finished item of work as per MoRT&H Specification 401 (5th revision) including contractors profit & Over head charges excluding Seignarage charges etc.

Road works;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 12%, P1 < 12% from approved sources, grading to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Road works;Providing Plain Cement Concrete (1:3:6) mix using 40mm size HBG crushed stone aggregate and fine aggregate (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying. Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work Bed for foundation.

Road works;Construction of un-reinforced, expansion and construction joint plain cement concrete pavement, thickness as per design, over a prepared base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to IS: 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete

Road works;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 12%, P1 < 12% from approved sources, grading to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Road works;Supply, delivery and fixing of HYSD bars including overlaps including cost and conveyance of material and labour charges etc., complete.

Road works;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 12%, P1 < 12% from approved sources, grading to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Road works;Construction of Granular sub-base by providing HBG material confirming to Grading VI of MoRT&H (Table 400-1 & 400-2) including cost, and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix-in-place method with rotavator / approved means at OMC and compacting with vibratory roller to achieve CBR value minimum of 30% at 98% of dry density and PI value maximum 6, complete for finished item of work as per MoRT&H Specification 401 (5th revision) including contractors profit & Over head charges excluding Seignarage charges etc.

Road works;Vibrated Reinforced cement concrete M20 Grade Concrete using 20mm and 10mm size HBG crushed stone aggregate (Course aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) and conveyance of all materials to site and all labour charges, centering, machine mixing, laying in position, Compacting. Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete for cover slab over drain.

Road works;Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc.. complete excluding seignioarge charges for finished item of work for Side drain trench

Road works;Construction of un-reinforced, expansion and construction joint plain cement concrete pavement, thickness as per design, over a prepared base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to IS: 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete

Road works;Construction of un-reinforced, expansion and construction joint plain cement concrete pavement, thickness as per design, over a prepared base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to IS: 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete

Road works;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 12%, P1 < 12% from approved sources, grading to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Road works;Construction of Granular sub-base by providing HBG material confirming to Grading VI of MoRT&H (Table 400-1 & 400-2) including cost, and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix-in-place method with rotavator / approved means at OMC and compacting with vibratory roller to achieve CBR value minimum of 30% at 98% of dry density and PI value maximum 6, complete for finished item of work as per MoRT&H Specification 401 (5th revision) including contractors profit & Over head charges excluding Seignarage charges etc.

Road works;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 12%, P1 < 12% from approved sources, grading to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Road works;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 12%, P1 < 12% from approved sources, grading to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Road works;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 12%, P1 < 12% from approved sources, grading to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Road works;Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc.. complete excluding seignioarge charges for finished item of work for Side drain trench

Road works;Construction of un-reinforced, expansion and construction joint plain cement concrete pavement, thickness as per design, over a prepared base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to IS: 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete

Road works;Construction of un-reinforced, expansion and construction joint plain cement concrete pavement, thickness as per design, over a prepared base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to IS: 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete

Road works;Cutting transverse contraction joints 3 to 4 mm wide and 1/3 rd depth of concrete slab using concrete groove cutting machine with diamond studded saw within 24-48 hours of casting of CC Pavement. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer inchargeand filling with Bt sealant

Road works;Construction of Granular sub-base by providing HBG material confirming to Grading VI of MoRT&H (Table 400-1 & 400-2) including cost, and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix-in-place method with rotavator / approved means at OMC and compacting with vibratory roller to achieve CBR value minimum of 30% at 98% of dry density and PI value maximum 6, complete for finished item of work as per MoRT&H Specification 401 (5th revision) including contractors profit & Over head charges excluding Seignarage charges etc.

Road works;Construction of earthen shoulders with selective soils obtained from borrow pits with MDD of 18 KN/Cum, CBR = 12%, P1 < 12% from approved sources, grading to meet requirement of MoRT&H, including all hire and operational charges of T&P complete for finished item of work as per MoRT&H specification 305 (5th revision)

Road works;Construction of un-reinforced, expansion and construction joint plain cement concrete pavement, thickness as per design, over a prepared base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates (Natural sand 50%+Manufactured sand(Rock Sand)50%) conforming to IS: 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit excluding Seignarage charges etc complete