Panchayat Raj Engineering Department Tender

Community Hall;Earth work excavation for foundations and depositing on hank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS-20 B (APSS 308) including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete. Footing

Community Hall;Plastering to brick masonary wall with 12mm thick double coat in CM (16) 8 mm thick buse coat and CM (1:4) of 4mm thick top coat with duhara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational. Incidental such as scaffolding charges, lift charges. including cutting of Grooves, finishing, turing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901.900 & 904) (CSSR) for internal Walls

Community Hall;Supply and filling of earth (ordinary soil) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating cach deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc. complete for finished item of work. (APSS NO. 309 & 310) including cost and conveyance of all material and labour charges,and contractors profit & over heads but excluding seignorage charges and GST etc., complete.

Community Hall;Flooring with vitrified tiles of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, 15:13712, colour and finish in all shades and designs IS: 13630 (Parts 1 to 15) of any colour and finish in all shades and designs 1st quality and of vize not less than 600 x 600 mm x 8 mm thickness glossy finish permium colours, set over huse cost of cement mortar (1:8), 12 mm thick over CC hed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread 3.3kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand, and water and flooring tiles etc., complete, including over heads & contractor profit, labour charges etc., complete for finished item of work, but excluding VAT and seignorage charges.

Community Hall;Providing brick work of 230mm thick in CM (1:6) prop, using common burnt clay bricks of cheo as per Table-1 of IS:1077-1992 Non-Modular or traditional size. including cost & conveyance of all material and labour charge, centering & scafolding charges, and overhead charges & Contractors profit etc.. complete as per APSS No.501 for Super structure and others but excluding GST and signage chapes.

Community Hall;Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger Nerolac/ Saicout/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian Berger/ Nerolac Salcout/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt und rumains of foose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc. complete for finished item of work as per SS 911 for internal walls

Community Hall;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (course aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50%Natural sand + 50% Manufactured Sand) coarse aggregate, water etc., to site including cast and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing. laying concrete, curing, including contractor profit and over head charges etc.complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work.

Community Hall;Providing High Vield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cotting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG. forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chain, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting. bending, placing in position, tying including severhead charges & Contractors profit hut exleading GST and other taxes on all materials ele complete for finished item of work in all floors.( APSS No.126)

Community Hall;Supply and fixing of sal wood Door double shutter Flush shutter to a frame of size 1.20 x 2.10m with Ilush door shutters, solid bond wood block board type with teak ply on both faces 35 mm thick conforming to IS:2202-TBSC-L.II-03. door of size 1.20 x 2.10 m with frame made of well seasoned sal Wood scantlings of size 100 x 75mm and shutter side rails 100mm X 32mm, top rail 100 mmX32 mm, bottom rail 100mmX 32 mm and intermediate rails of 100mm x 32 mm and planks - 10 nos. of 25mm thick as per approved design with fixtures of 6 nos of 9" 7" holdfasts, 300 mm long bross aldrop-1 no, 125mm long bross butt hinges 6 No's, brass Door stoppers-2 no, 250mm bross tower bolt-2nos, 150mm long brass Tower bolts 1-no. brass fancy handles 150 mm -2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete but excluding GST as per specifications (APSS NO.1001 & 1002)

Community Hall;Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger/ Nerolac Saicoat/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc. complete for finished item of work as per SS 912 for external walls.

Community Hall;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (course aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50%Natural sand + 50% Manufactured Sand) coarse aggregate, water etc., to site including cast and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing. laying concrete, curing, including contractor profit and over head charges etc.complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work.

Community Hall;Supply and filling of gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational incidental, labour charges, hire charges of T & P etc. complete for finished item of work (APSS NO. 309 & 310) including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete.

Community Hall;Plastering to brick masonary wall with 20mm thick double coat in CM (1:0) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubars sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc. complete for for finished item of work. (APSS 901.903 & 904) (CSSR) for outer walls

Community Hall;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (course aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50%Natural sand + 50% Manufactured Sand) coarse aggregate, water etc., to site including cast and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing. laying concrete, curing, including contractor profit and over head charges etc.complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work.

Community Hall;Brick Masonry 115mm thick in superstructure with CM (14) prop: using 2nd class 74 59.42 Bricks from approved source having minimum crushing strength of 50 kgm2 including all operational & incidental, scaffolding, lift & labour charges,, and Cost and Conveyance of all materials etc., complete for finished item of work but excluding seigniorage charges (APSS No. 501 & 504

Community Hall;Plastering to brick masonary wall with 20mm thick double coat in CM (1:0) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubars sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc. complete for for finished item of work. (APSS 901.903 & 904) (CSSR) for outer walls

Community Hall;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of 18 456 using with 20mm size graded machine crushed hard granite metal (course aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50%Natural sand 50% Manufactured Sand) course aggregate, water etc.. to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, including contractor profit and over head charges etc..complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers upproved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work.

Community Hall;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of 18 456 using with 20mm size graded machine crushed hard granite metal (course aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50%Natural sand 50% Manufactured Sand) course aggregate, water etc.. to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing, laying concrete, curing, including contractor profit and over head charges etc..complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers upproved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work.

Community Hall;Supply and placing of the VRCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (course aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50%Natural sand + 50% Manufactured Sand) coarse aggregate, water etc., to site including cast and conveyance of all materials, including all operational, incidental and labour charges such as, machine mixing. laying concrete, curing, including contractor profit and over head charges etc.complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work.