Nalsar University Of Law Tender

works;Providing, Laying , Spreading & Compacting graded stone aggregate to wet mix mecadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in sub base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density. complete for finished item of work as per MoRT&H specification 406 (5th revision)

works;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) Cement component not less than 400Kgs / cum, coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying de bonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

works;Plain Cement Concrete M10 (cement: fine aggregate: Coarse aggregate) for foundations flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) Under Footings

works;Plain Cement Concrete M10 (cement: fine aggregate: Coarse aggregate) for foundations flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) Under Footings

works;Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipe NP3 class of 300mm dia conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length) including lowering and jointing with rubber seal rings conforming to BIS 5382/1985 complete for finished item of work

works;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel , MCB as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template or equivalent Makes: BAJAJ / VALMONT / TRANSRAIL /SKIPPER/UTKARSH/LAASMA/CONSOUL MCB Makes: 6A,10KA, ISI marked, C/D curve of makes Legrand DX3 / Schneider Acti 9

works;Fabrication, Transportation, and supply of 1.5 Mtr sword type or decorative single bracket with dooms paint complete with all accessories with MS galvanized 50mm dia Pipe. Makes: BAJAJ / VALMONT/TRANSRAIL/SKIPPER/UTKSH/LAASMA/CONSOUL

works;Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly provided 4 Nos foundation bolts with nuts with providing of 0.45Mtrx0.45Mtrsx1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete.

works;Supply and fixing of suitable out door feeder pillar box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board, suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schneider make 63A, 4 Pole isolator as incomer, 9 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sq.mm 3 core copper cable for individual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following

works;Supply and transportation and fixing of 60 / 65 W +/-10% (>=6500 Lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warrantywith fixing of luminaire on pole 3 core 2.5 sqmm flexible copper cable incluidng masonry work and all labour charges and giving connections etc, complete makes:LUMINAIRE MAKE : PHILIPS / OSRAM / GE VENTURE / CROMPTON / BAJAJ / WIPRO JAGUAR/ EVEREADY / HALONIX / KESELEC / HAVELLS / POLYCAB / SURYA / SYSKA / CAPART/ FORTUNE ARRT/ FIEM / PANAONIC / ARRAYSTORM / GM / GOLDMEDAL

works;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER/ UTKARSH / LAASMA / CONSOUL

works;supply and run of 25mmx6mm G.I Strip including cost of all accessories and labour charges etc complete

works;supply and run of no.8 SWG GI wire incluid ng cost of all accessories and labour charges etc complete

works;Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal /Polycab / Havells / Finolex/ Paragon

works;Supply of 25 Sqmm 3.50 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal /Polycab / Havells / Finolex/ Paragon

works;earth excavation of trench (0.2wx0.3m) in hard ground soil for laying of HDPE pipe up to 50 sqmm size and the department including cost and conveyance of all materails and labour charges etc, complete

works;Termination of UG of 4 core 10sqmm & 4 core 16 sqmm including with required heavy duty cable glands & lugs complete with all required accessories as directed by the department including cost nd conveyance of all maetrials and labour chrges etc complete makes: Torrent / Unicab / Universal /Polycab / Havells / Finolex/ Paragon

works;Termination of UG cables of of3.5 core 2.5 sqmm including with required heavy duty cable glands & lugs complete with all required accessories as directed by the department including cost nd conveyance of all maetrials and labour chrges etc complete Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Ollivin / Beljin / Bonton / Avocab

works;Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete.

works;Supply of 2.5 sqmm 3 core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Ollivin / Beljin / Bonton / Avocab

works;Removing exisitng 70 sqmm HT under ground cable of 0.60 m below from ground level and relaying the same cable in the exisitng cable trench with necessary "L" angle iron at every 3 mtrs distance etc complete.