Municipal Corporation Tender

Protection to Open Land;BLD-CSTN-3-14-(31) - A : S: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Note : 1) The cement content is adopted as 350Kg/cum for estimating purpose only.The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 350 Kgs/ Cum the defference in cost shall be deducted(Footings)

Protection to Open Land;Supply and Fixing of Chain Link Mesh of 3"x3" (76 mm x 76 mm) - 8 Gauge of 1.50 m height with Angulars Angular 50x50x5mm and Height of 2.10 m ,Flats 20x20x5 mm, Nut Bolts including Earthwork Excavation (0.45x0.45x0.75m),Sand filling (0.45x0.45x0.15m) PCC (1:2:4) (0.30x0.30x0.45m) etc complete for finished item of Work.

Protection to Open Land;Earth work excavation in Ordinary Soil by Manual Means-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work Manual

Protection to Open Land;Clearing and Grubbing Road Land non-thorny jungle (light jungle) by mannual Means

Protection to Open Land;Construction of Gravel base including cost, and conveyance of all materials to work site and spreading in uniform layers by approved means, on prepared surface and compacting with three wheel 80-100 kN static roller / Vibratory Roller 80-100 kN to achieve the desired density at OMC etc., complete for finished item of work as per MoRT&H Specification 401& 408 (5th revision) and as directed by the Engineer-in-charge.

Protection to Open Land;Carting of the Exavated earth upto a lead upto 5 km beyond the initial lead of 1 Km from site including loadingand unloading as per the engineer in charge.

Protection to Open Land;Supply and Fixing in position of MS steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows etc, including cost and conveyance of all material , labour charges for fabrication and fixing in postion etc,. Complete.

Protection to Open Land;BLD-CSTN-3-14-(31) - A : S: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Note : 1) The cement content is adopted as 350Kg/cum for estimating purpose only.The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 350 Kgs/ Cum the defference in cost shall be deducted (Plinth Beams)

Protection to Open Land;Engaging of Excavator Hitachi-200 Capacity Mechine on Hire basis to work in any place in GWMC limits (Core & Non core areas) Including cost of Fuel charges hire charges and driver batta on hourly basis including cost and conveyence of all charges etc., completed.

Protection to Open Land;Plastering 20mm thick two coats with base coat of 16mm thick in C.M. (1:6) and top coat of 4mm thick in C.M. (1:3) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand , Water, etc., to site, charges, all operational, including charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing , including cutting grooves where ever necessary etc., complete for finished item of work of uneven surfaces of walls