Municipal Corporation Tender

community hall;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including labour charges

community hall;Plastering 12mm thick in two coats with a base coat of 8mm thick in CM (1:5) prop and top coat of 4mm thick in CM (1:3) prop. with dubara sponge finish including cost and conveyance of all materials and water to work site seigniorage and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work. for inner walls

community hall;Supplying, laying, jointing and testing 101.6 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1:5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping.

community hall;Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:6) prop. 12mm thick over CC bed already laid or RCC roof, slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed nealty with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc complet, including seigniorage charges etc complete, including seigniorage charges etc complete for finished item of work.

community hall;Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings but without Regulator of makes Crompton / Bajaj Kassels 50 / Usha atom

community hall;Supply and fixing of 90 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand

community hall;Providing independent earthign by excavating a trench to a depts of 2.1m in all soils as per size specified using 40mm dia B class GI pipe of 2.5 mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal propertion of sald and charcoal in layers and all labour charges etc,. complete.

community hall;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) sliding doors three track - three glass shutters sliding - 112 - Series duly manufactured using UPVC reinforced profiles of 112.0 mm x 60 mm x 2.25 mm for outer frames, 66 mm x 42 mm x 2.25 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work

community hall;S& F 20 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

community hall;Supply and fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand

community hall;S& F 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

community hall;Supplying & fixing CI Nahany traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 3" (75 mm nominal size ) Nahany Trap ( without Jali without inlet)UPVC/SWR Pipe fittings

community hall;Supply and run of 2x28/0.3mm (1sqmm) PVC insulated copper cable for run of mains in existing pipes including all charges etc., complete.

community hall;Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete but excluding seigniorage charges for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904) For Outer walls

community hall;Flooring with VETRIFIED TILES 600MMX600MM set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work,.

community hall;Flooring with ceramic tiles 7.3 mm thick of 1st qualilty of all shades in cement mortor (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread #@ 3.3kgs per sqm and jointed neatlly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc complete including seigniorage charges etc complete for finished item of work,. tiles 300x300 thickness & 7-8 mm

community hall;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

community hall;Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 of ANAND/ RAAVILA/ KUTTY/ STANDARD/ SHUBHDWAR/ ITP

community hall;S& F 15 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

community hall;S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indianmakeheavytype-20mmNBSize

community hall;Ventilators:Providing and fixing of louvered Ventilators made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with a polyester paint with and fitted with 4 mm thick plain float glass including fixing the frames in concrete/masonry wall by means of self expanding screws, etc., complete for finished item of work for (i) Single fixed Louvers Ventilator size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame box section size of 80 x 45mm and (ii) Double fixed Louvers ventilator Size of 4? 0? x 2? 0? (1219.2mm x 609.6mm) outer frame box section size of 80 x 45mm, vertical mullion section size of 80 x 60 mm and (iii) Double fixed Louvers Ventilator size of 4?0? x 3?0? (1219.2mm x 914.4mm) outer frame box section size of 80 x 45mm , Vertical mullion section size of 80 x 60 mm

community hall;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

community hall;Plain Cement concrete Grade M20-Nominal Mix using 20 mm size graded machine crushed hard granite metal (coarseaggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.

community hall;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.

community hall;Supply and fixing of 4 way TPN distribution board with IP-43 protection (metal door) suitable for 3 phase ELCB/RCCB/DP Isolator as incomer and 10KA SP MCB's as out going including internal connection and labour charges for surface flush mounting etc., complete.

community hall;Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm

community hall;Brick masonary in CM (1:6) with 2nd class bricks traditional size 23x11x7 cm including c/c of all material and water to work at site cost of seigniorage charges and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc complete for finished item of work.

community hall;Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with VPIT Chokes and all standard accessories of makes Crompton / Bajaj / Surya / Havells / HPL / Fortune Art 1 x 36/40

community hall;Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover

community hall;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931

community hall;Supply and fixing of 6aA x 3/2 pin point type wall plug socket with 6A flush type switch control on common board including labour chrages and etc., complete.

community hall;Providing impervious coat to exposed RCC roof slab surfcace with CM (1:3), 20mm thick with 1 kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorages charges, excluding conveyance charges of materials and includng all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing rouding off junctions of wall and slab etc complete for finished item of work.