Municipal Corporation Tender

Repairs and reconsrtuction;Groove Cutting of 2-4 mm for 1/3rd depth of concrete slab using concrete groove cutting machine with diamond studded saw within 24 hours of casting of CC pavement

Repairs and reconsrtuction;Supply and placing of the Ready Mix Concrete (RMC-M30) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard Mix Design as per IS-10262:1982 with coarse aggregate of nominal size 20 mm and fine aggregate of Zone-II as per the Mix Design approved by the Department from standard suppliers including cost and conveyance, vertical pumping up to 5 floors / horizontal pumping up to 60.0 M for builsings / pavements etc., works for basic cost including levelling, grading, spreading, curing, centering, vibrating, compacting, finishing etc as required including material VAT, excise duty, pumping, transportation, approved admixture etc., complete

Repairs and reconsrtuction;Supply and placing of the Ready Mix Concrete (RMC-M10) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard Mix Design as per IS-10262:1982 with coarse aggregate of nominal size 20 mm and fine aggregate of Zone-II as per the Mix Design approved by the Department from standard suppliers including cost and conveyance, vertical pumping up to 5 floors / horizontal pumping up to 60.0 M for builsings / pavements etc., works for basic cost including levelling, grading, spreading, curing, centering, vibrating, compacting, finishing etc as required including material VAT, excise duty, pumping, transportation, approved admixture etc., complete

Repairs and reconsrtuction;Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Repairs and reconsrtuction;Supply and Delivery of Manhole covers and frames with ISI Marking anywhere in T.G.F.O.R destination including loading, Unloading and stacking at site 600mm X 600mm DI Jalli with frame 90Kg (HD)

Repairs and reconsrtuction;Manufacture, supply, delivery and placing of precast slabs of size 1.8*0.3*0.1mts casting with M20 grade nominal mix and reinforcement as shown in the drawings, covered by frame, curing for a period of 14 days, placing at site as per the instructions of field officer including cost and conveyance of all materials, labour charges, centering charges etc complete

Repairs and reconsrtuction;Manufacture, supply, delivery and placing of precast slabs of size 1.5*0.3*0.1mts casting with M20 grade nominal mix and reinforcement as shown in the drawings, covered by frame, curing for a period of 14 days, placing at site as per the instructions of field officer including cost and conveyance of all materials, labour charges, centering charges etc complete

Repairs and reconsrtuction;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded. Reinforcement steel(HYSD/TMT) from steel manufacturers like TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER, BALAGI SHAKTI, AF STAR, TMT/MS LIFE TMT, RADHA TMT AND SUGUNA TMT

Repairs and reconsrtuction;Slab

Repairs and reconsrtuction;wall

Repairs and reconsrtuction;Supply and placing of Reinforced Cement Concrete (RCC) M30 by RMC with minimum cement content of 407 Kg/Cum as per IS code 456-2000 and standard mix design as per IS:10262:2009 with Ordinary Portland Cement 43/53 grade and with 20mm size graded (20mm-60% & 10mm-40%) machine crushed hard broken stone of granite/trap/dolerite metal free from dust obtained by quarying, wedging, breaking, burning, splitting, machine crushing and blasting and fine aggregate (Manufactured sand (rock sand ) and natural sand in the ratio of 50:50)conforming IS:383-1970 (as per the Mix Design approved by the Engineer - in - Charge of the Department from standard suppliers) including cost and conveyance of all materials, labour charges, water charges, pumping, including form work and centering charges, laying concrete, vibrating, curing for 14 days, complete for finished item of work but excluding cost of steel and its fabrication charges and seigniorage charges as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 1800 MORTH. Raft Note: 1) The quatities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Repairs and reconsrtuction;Supply and placing of the Ready Mix Concrete (RMC-M10) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard Mix Design as per IS-10262:1982 with coarse aggregate of nominal size 20 mm and fine aggregate of Zone-II as per the Mix Design approved by the Department from standard suppliers including cost and conveyance, vertical pumping up to 5 floors / horizontal pumping up to 60.0 M for builsings / pavements etc., works for basic cost including levelling, grading, spreading, curing, centering, vibrating, compacting, finishing etc as required including material VAT, excise duty, pumping, transportation, approved admixture etc., complete

Repairs and reconsrtuction;RR Masonry in CM (1:6) including cost and conveyance of all materials, labour charges and all other incidental charges excluding seignorage charges etc complete for finished item of work.

Repairs and reconsrtuction;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Repairs and reconsrtuction;Carting the excavated earth to a lead of 15 KMS including Labour chargess for loading and unlosding, Transportation etc. complete

Repairs and reconsrtuction;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Repairs and reconsrtuction;Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately. Cement conrete by mechanical means