Municipal Corporation Tender

CC Road;Supply of 25mm thick high performance premoulded expansion joint filler board (SILFLEX CAPCELL HD-100 or equivalent make), placing the same 25 mm below top of pavement slab, sealing without bituminous hot sealing compound (Grade 'A' ISI)/polysulphide at 50 m interval in CC pavement including cost and conveyance of all materials for expansion joints conforming to MORTH specification No. 602 - 1 Rmt of joint length for 100 mm thick slab B287

CC Road;Saw cut joints for freshly laid concrete pavement including all materials and labour charges

CC Road;Providing of Mechanical travelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc complete for finished item of work

CC Road;Supply and placing of Ready Mix Concrete M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M30) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

CC Road;Supply and placing of impermeable plastic sheet 125 micron thickness over cement concrete mix as a separation membrane including cost and conveyance of all materials etc., for finished item of work.

CC Road;Supply and placing of Ready Mix Concrete M 10 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M10) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

CC Road;Providing laying spreading and compacting graded stone aggregate to WMM specification including premixing the material with water at OMC in mechanical mixer(Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well perpared sub- baseand compactiong with smooth wheel roller of 80-100KN/ vibratory roller 80-100KN weight to achieve the desired density including lighting barricading and maintenance of diverion etc as per table 400.11 400.12 and technical specification clause 406 MORD/ MORTH

CC Road;Carting the excavated earth to a lead of 15 KMS including Labour chargess for loading and unloading, Transportation etc. complete as per specification

CC Road;Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH

CC Road;BT Cutting including T&P and sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH

CC Road;Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH using Air compressor 210 / 250 cfm with two leads for pneumatic cutters / hammers @ 1 cum per hour (diesel 7cmm)