Municipal Corporation Tender

SWD Work;Providing barricading arrangement with casurina ballies as per design duly excavating pits and its removal after the function is over including hire charges of the barricading materials as per the schedule given by the departmernt authorities complete for finished item of work. 2-TIER (2 Nos Horizontals- 6'-0" long -1 No Vertical- 4'-0" High)

SWD Work;Supply and placing of the Ready Mix Concrete (RMC) M30 grade Standard Design Mix Concretegrade as per IS4926- 2003 with minimum cement content as per IScode456- 2000 using 20mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, centering, shuttering vibrating / screed / pan vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, for finished item of work. (M30-350 Kgs) {50% natural river sand + 50% rock sand}

SWD Work;Carting of excavated earth with a lead of about 14 KMts, including cost and conveyance of all materials and all labour charges, contractor profit and over head charges etc., complete for finished item of work as directed.

SWD Work;Laying of Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stitching charges and labour charges etc., with 13.615% overhead charges and contractors profit. (Pg.No.30/594, Sl.No.97, SSR 2024-25)

SWD Work;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 50m including all operational, incidental, Hire charges etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) in ordinary soils by mechanical means upto 3m depth (using hydraulic excavator)

SWD Work;Mechanical trowelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc, complete for finished item of work as directed by Engineer-in-Charge (Pg.No.495/594, Sl.No.25(c), SSR 2024-25)

SWD Work;Filling with useful available excavated earth (excluding rock) sand/gravel/ stone dust/ chips in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. But excluding cost and conveyance of material. (APSS NO. 309 & 310) Earth/ Sand/ gravel filling (ordinary soil)

SWD Work;Lowering the RCC S/S pipes carefully into the ready made trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water lead upto 500 meters excluding cost of rubber rings as per BIS No.783/1985. For 900mm dia (Pg.No.493/594, SSR 2024-25)

SWD Work;Plain Cement concrete 1:4:8 prop (Cement : fine aggregate: coarse aggregate ) for foundation and under flooring bed using 40mm size (SS 5) Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work per 1 Cum. (hand mixing)

SWD Work;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). Earth work excavation Hard rock (blasting prohibited)-Upto 3 m depth, using air compressor

SWD Work;Hiring Dewatering pump 5 HP ( diesel ) including hire charges, fuel charges and crew charges (Pg.No.47/594, Sl.No.26, SSR 2024-25)

SWD Work;House service water supply pipe connections including cost and conveyance of all materials etc complete.

SWD Work;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading , curing for 14 days,vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc.,. This also includes Centering and scaffolding charges with labour charges for errection and dismantling of shuttering and steel scaffolding complete. complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. (For top Slab) , Cement (@ 360 kg/Cum). For pipeline cps slab

SWD Work;Cutting B.T. Road surface including stacking of excavated materials for pipe line trench work. (Pg.No.495/594, Sl.No.25(a) (i), SSR 2024-25)

SWD Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. (without paver finisher)

SWD Work;Supplying, fitting and placing HYSD Fe 500 Grade steel for RCC works complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, including cost of all materail like HYSD bars, binding wire, chairs, space bars and all labour charges for cutting, bending, placing position, shifting to site, tying etc.. complete where they are not welded

SWD Work;Manufacture, Supply and Delivery of RCC NP4 Socket and spigot pipes confirming to BIS 458/2003 including rubber rings, cost and conveyance of all materials. For 900 mm dia (SSR item) (10km lead)

SWD Work;Junction Connection, for water supply pipe HDPE pipe including cost and conveyance of all etc., complete.