Municipal Corporation Tender

Restoration of CC Roads;Providing laying spreading and compacting graded stone aggregate to WMM specification including premixing the material with water at OMC in mechanical mixer(Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well perpared sub- baseand compactiong with smooth wheel roller of 80-100KN/ vibratory roller 80-100KN weight to achieve the desired density including lighting barricading and maintenance of diverion etc as per table 400.11 400.12 and technical specification clause 406 MORD/ MORTH

Restoration of CC Roads;Carting the excavated earth to a lead of 15 KMS including Labour chargess for loading and unloading, Transportation etc. complete as per specification

Restoration of CC Roads;Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH

Restoration of CC Roads;Supply and placing of Ready Mix Concrete M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M30) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Restoration of CC Roads;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding central excise duty, sales tax, octroi and other Govt levies etc.,as applicable. I.S.I Mark H.D.-20 with 500mm dia clear opening

Restoration of CC Roads;Raising manhole 0.10 mt depth Constructon over 0.90 circular sewer man hole of 0.90 mts depth with Cement concrete M20 grade nominal mix including removing and fixing FC/ CI cover and frame but excluding the cost of cover and frame . including the cost and conveyance of all materials at site complete and curing for 21 days complete all taxes as per specification etc complete. and excluding Seigniorage charges

Restoration of CC Roads;Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH - Air compressor Diesel-7cmm

Restoration of CC Roads;Supply and placing of Ready Mix Concrete M 10 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M10) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Restoration of CC Roads;Supply of bituminous hot sealing compound (Grade A ISI)/ polysulphide and sealing the joint including cost and conveyance of all material etc for contraction joints at 4.5m interval/ for longitudinal/ transverse joints as per MORTH specification No. 60- 1Rmt