Mission Bhagiratha Department Tender

Providing Drinking water facilities in 2BHK colonies;Supplying, fitting and placing HYSD bar reinforcement in position etc., complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Providing Drinking water facilities in 2BHK colonies;Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK (L&T) /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc.,complete.

Providing Drinking water facilities in 2BHK colonies;RCC M30 Grade with 20 mm HBG metal including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for phenial

Providing Drinking water facilities in 2BHK colonies;Cutting of BT road surface including water bound macadam /wet mix macadam etc., and stacking of excavated materials excluding all Taxes.

Providing Drinking water facilities in 2BHK colonies;Providing 15mm dia House Service Connection as per standard specification including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. with saddles contoured to fit around the pipe and PP Saddles shall be blue with moulded SS female threaded outlets and seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows, MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve , including lowering, laying and jointing including earth work excavation up to 0.6m depth and refilling the pipe line trench after laying the pipe line etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Providing Drinking water facilities in 2BHK colonies;Supply of Arcylic Emulsion Paint Weather Proof( Aphex twin light emulsion Zone blue -7325) with Two coat including cost and conveyence of all materials and labour charges etc.complete.

Providing Drinking water facilities in 2BHK colonies;Painting with food grade epoxy Material paint two coats over internal walls of GLBR including cost and conveyance of all materials and labour charges etc. complete.

Providing Drinking water facilities in 2BHK colonies;Filling the Foundation with sand including cost and conveyance of all material and labour charges etc,Complete.

Providing Drinking water facilities in 2BHK colonies;Manufacture, Supply and delivery & Fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage.Drilled as per requirement of the dept. As per standard specification along with Manufacture, Supply and fixing of 0.60m DI D/F pipes 2 Nos, with HDPE tail pieces 2 Nos and MS Flanges both suitable for installation in between flange end pipes Including construction of RCC Valve chamber as per approved etc., complete.

Providing Drinking water facilities in 2BHK colonies;Providing 15mm dia House Service Connection as per standard specification including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. with saddles contoured to fit around the pipe and PP Saddles shall be blue with moulded SS female threaded outlets and seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows, MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve , including lowering, laying and jointing including earth work excavation up to 0.6m depth and refilling the pipe line trench after laying the pipe line etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Providing Drinking water facilities in 2BHK colonies;RCC M30 Grade with 20 mm HBG metal including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for phenial

Providing Drinking water facilities in 2BHK colonies;Supply & Delivery of HDPE pipes as per IS:4984-2016 for water supply with its amendments and revisons thereon includind earth work excavation, lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavtion of size 0.7x1.0m for pipe lines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soil and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing & commissioning of pipeline etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work but excluding all taxes.

Providing Drinking water facilities in 2BHK colonies;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Providing Drinking water facilities in 2BHK colonies;Supply of WPSC (Weatherproof Single Core) ISI mark Aluminum Wire. Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab /Nakoda / Payal / Finecab / Gemini / Vimal /Suncab / Stanjo / Rajnigandha / Orbit / Airson /Beljin / Savera Champion / Rhino etc Complete

Providing Drinking water facilities in 2BHK colonies;S& F 50 mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete.etc Complete

Providing Drinking water facilities in 2BHK colonies;Construction of pedestals with M20 (1:1.5:3) mix using 20mm HG metal including cost and conveyance of all materials and labour charges etc as per standard specification with all charges etc Complete.

Providing Drinking water facilities in 2BHK colonies;RCC M30 Grade with 20 mm HBG metal including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for

Providing Drinking water facilities in 2BHK colonies;RCC M30 Grade with 20 mm HBG metal including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for phenial

Providing Drinking water facilities in 2BHK colonies;Water Based Cement Primer of Exterio grade-2 with one coat including cost and conveyence of all materials and labour charges etc.complete.

Providing Drinking water facilities in 2BHK colonies;PCC M 15 using 40 mm HBG metal including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for foundation levelling course Sump portion

Providing Drinking water facilities in 2BHK colonies;Supply & Delivery of HDPE pipes as per IS:4984-2016 for water supply with its amendments and revisons thereon includind earth work excavation, lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavtion of size 0.7x1.0m for pipe lines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soil and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing & commissioning of pipeline etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work but excluding all taxes.

Providing Drinking water facilities in 2BHK colonies;Impervious coat Plastering in cm (1:3) proportion 12mm thick including cost and conveyance of all materials labour charges etc complete for finished item of work

Providing Drinking water facilities in 2BHK colonies;Supply, installation, testing and commissioningof C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / H-Shankar /Leader/ Zolotto / Intervalve / Honeywell./ Kartar etc Complete

Providing Drinking water facilities in 2BHK colonies;Supply, Transportation, Installation and commissioing of 5 HP/8 Stages Three phase open well ISI submersible motor THREE PHASE OPEN WELL SUBMERSIBLE Pumpset makes: Texmo/CRI/KSB/ARYAN varsha/Lubi/Falcon etc to complete for fininshing item of the work

Providing Drinking water facilities in 2BHK colonies;RCC M30 Grade with 20 mm HBG metal including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for

Providing Drinking water facilities in 2BHK colonies;Supply, Transportation and fixing of 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts etc Complete

Providing Drinking water facilities in 2BHK colonies;RCC M30 Grade with 20 mm HBG metal including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for

Providing Drinking water facilities in 2BHK colonies;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Pedastals.

Providing Drinking water facilities in 2BHK colonies;Supply of 3 Core Flat Copper cable of ISI for Submersible Motors Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab /Payal / Finecab / Gemini / Vimal / Suncab /Delton / Ollvin / Airson / Stanjo/ Nakoda /Beljin / Savera Champion / Rhino etc Complete