Mission Bhagiratha Department Tender

Providing pumpset;Supply and run of 3 Core 10.0 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors. including providing end terimations with glands. lugs , crimping job etc complete for finished item of work.. Makes : Finolex / RR Kabel / Havells / Nakoda including cost of all materilas, transportation complete for finished item of work

Providing pipeline;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate valves(soft seated) resilient seated soft seating Gate valves(Sluice valves) of PN 1.6 grade with body bonnet of Ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per IS.3896-Part2-1985 and sub sequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be vaccum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538 to suit the pressure class of pipe including supply delivery laying and jointing of S/F tapered tail pieces of 5 and 15 degrees on either ends to suit the main pipe line and valve including cost of joint materials such as rubber gaskets,bolts & nuts and labour charges with construction of RCC valve chamber 150 mm dia Sluice valve

Providing pumpset;Supply & Fixing of Star Delta Starter 415V, Three phase, 50Hz. With SS enclousure comprising of contactor with bi-metalic relay with necessary push buttons, etc., complete suitable from Makes: Siemens / Crompton / L&T / BCH including cost of all materilas, transportation and all labour chrages complete for finished item of work - Three phase 415 V Stater 12.5 HP to 15.0 HP.

RCC Chamber for Booster Pump;Sidewall around - RCC M30 Grade Mix using 20 mm guage HG metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement charges ect., completed.

Providing pumpset;Supply, delivery ,transporation, errection, testing and commisioning of 15.00 HP open well submersible motor pump sets for booster pumps for Discharge of 620 LPM and 60.00 Mts Head for each Pump Set with efficiency not less than 60% of Texmo/CRI/KSB/Lubi /Falcon with water resistant dynamically balanced impeller with stainless steel sleeves pump coupling and pivot with squirrel cage inductor motor of 3phase 415V 50HZ AC supply heavy copper windings with with water proof insulation and high pressure strength not to be efected by chemicals in water with suitable bronze bearings errected with h-type clamps odutable size and strength including cost of all materilas, transportation and all labour chrages as per the directions of the Engineer-in-charge etc Complete for finished item of work

Providing pumpset;Supply and run of 50 Sqmm 3.5core UG cable XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work.

Providing pumpset;Supply, Transportation, laying, testing & commissioning of 100 mm Dia 'B' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing thepipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes

RCC Chamber for Booster Pump;Bottom Raft -RCC M30 Grade Mix using 20 mm guage HG metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement charges ect., completed.

Providing pipeline;'Construction of pipelines for water supply with HDPE pipes as per IS 4985:1995 with its amendments and revisions thereon including supply of pipes necessary specials such as bends, Tees, as per site requirements, lowering, laying and jointing of pipes (with Butt fusion welding) true to alignment and gradient, excavation of pipe line trench (Earth work excavation in all soils, up to SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipe lines in all soils except hord rock requiring Blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC soils) with watering and tamping and removing surplus earth from site of work, and filling pipe line with water and testing to the required pressure etc., Complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipe line work, but excluding GST. 180 MM 6 KG/CM2

Providing pumpset;Supply, installation, testing and commissioning of 100mm C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / Hshankar including cost of all materilas, transportation and all labour chrages as per the directions of the Engineer-in-charge complete for finished item of work

RCC Chamber for Booster Pump;Top Slab 100 mm thick - RCC M30 Grade Mix using 20 mm guage HG metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement charges ect., completed.