Mission Bhagiratha Department Tender

Water supply;Costruction of Pipe Line - Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. Including Earthwork, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. - 63 mm PVC 6 Kg

Water supply;Providing 15mm dia House service connection as per standard specification including the cost of the materials like Clamp Saddle/ Electro fusion Saddle confirming to prEN 12201-3, Manufactured from virgin resin of PE-80/PE-100 with FLOW CONTROL VALVE (5 LPM @5m head), Compression Elbows, MDPE PE80 Blue Pipe & Supplying and fixing of of GI Pipe including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line and including cost of 15mm dia meter brass body CP finish bib tap of BIS standard etc including GI verticals complete for finished item of work

Water supply;Supply and fixing of 80mm dia Duck foot bends

Water supply;Construction of Over Head Service Reservoir using vibrated reinforced cement concrete M30 grade with raft foundation as per Departmental Designs and Drawings in force with necessary earth connections complete, including earth work excavation in all soils except rock requiring blasting in wet or dry conditions for foundations, cost and conveyance of all materials. All Valves near inlet and outlet for scour shall be D.I. Valve and plastering with Cement Motor (1:3) 8mm thick inside and 12mm thick out side the tank and inclusive of three coats of epoxy paint to inner surface of the reservoir, roof and 2 coats of weather proof emulsion painting for external surfaces, over one coat of primer of approved make lettering, all required fixtures for pipes, bends, valves etc., for pipe connections but excluding cost of inlet, out let connections and valves as per departmental designs and drawings and including cost of fixing of D.I. Specials, and exclusive of bolts & nuts but including labour charges for hoisting, jointing with rubber insertion, nuts and bolts. All valves near inlet, outlet and for scour of OHSRs shall be D.I valves, Fixtures include as per drawings ::-, a) RCC or Aluminium ladder inside 0.60 M. wide., b) Spiral stair case on the out side shall be provided with RCC railing as per drawings, c) Lightening arrester of approved pattern including conductor and earthing set etc., with IS Codes, d) RCC phenial ventilators with copper or stain less steel fly proof mesh, e) D.I. Manholes frame and cover 0.60x0.60m as per I.S. Specification (Light duty)-2Nos., f) Water level indicator of good quality with ebonite / copper float approved pattern-1No., g) The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1 Mt., h) D.I. swan neck ventitators shall be provided in Top dome and slab. Inner Dia ::- 7 Mts., Side Wall Height :- 4.00 Mts.,, i) The Cement cost is Rs.5300/- per M.T. including cost and conveyance, j) The Steel cost GR FE 500 is Rs.60,000/- per M.T. including cost and conveyance, 120 KL OHSR of 12 mts staging

Water supply;Supply and fixing of 80 mm dia D/F pipes - 2m. Long

Water supply;Supply and fixing of 100mm dia Bell Mouth

Water supply;Supply and fixing of 100mm dia DI Sluice valve for Outlet

Water supply;Supply and fixing of 100mm dia D/F pipes - 0.60 m Long

Water supply;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts and labour charges etc.complete for finished item of work - 80mm Sluice valves on 75mm Dia 8kg/cm2 piep line

Water supply;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts and labour charges etc.complete for finished item of work - - 100 MM on 110 mm PVC 6 Kg

Water supply;Supply and fixing of 80 mm dia DI Sluice valve for Inlet

Water supply;Costruction of Pipe Line - Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. Including Earthwork, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. - 75 mm PVC 6 Kg

Water supply;Supply and fixing of 100mm dia Semicircular Bendd

Water supply;Restoration of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per G.O. Rt. No. 63 of (PR & RD), Dt. 24.01.2017 providing VCC (1:2:4) equalent to M 20 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approval fixed side formwork Steel channel, wedges, Steel plates including leveling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using scared and plate vibrators and finished in continuous operation including curing of concrete slabs for 14 days and water finishing to lines and grade as per drawing and Technical specification clause 1501 MORD

Water supply;Supply and fixing of 100mm dia D/F pipes - 2m. Long

Water supply;Supply and fixing of 100mm dia D/F pipes - 1m Long

Water supply;Supply and delivery of DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and Air Valve including laying, jointing of DI/MS Tee and Isolation Sluice valves along with Air Valve including cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 50mm dia 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work. - 50mm Air valves on 75 mm Dia 8kg/cm2 HDPE pipe line

Water supply;Supply and fixing of 100mm dia Duck foot bends

Water supply;Costruction of Pipe Line - Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. Including Earthwork, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. - 110 mm PVC 6 Kg

Water supply;Supply and fixing of 80 mm dia D/F pipes - 0.60 m Long

Water supply;Construction of pipe line for water supply with HDPE pipes as per IS:4984:1985, with its amendments and revisions there on including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alignment and gradient , trench excavation for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost, conveyance of all materials and labour charges for finished item of pipe line work and excluding all Taxes. - 75 mm Dia 8 kg/cm2 HDPE Pipe line