Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Providing full height aluminium partitions at rear block ground floor;Providing full height aluminum partitions at Rear block Ground Floor South Side Opp to the chamber of CGM (Engg) Revnue Circle, for the Dy General Manager (Rev) for the O/o Chief General Manager (Engg) Revenue Circle with Supply and fixing of partitions made of seccolor pre-painted steel (base steel as per IS 513 of 0.58 mm thick ?D? quality, galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick alkyd backer. Section for outer frame should be 46x52mm, section for shutter should be 46x46mm, section for mullion should be 46x70mm, section for beading should be 18x25mm and section for middle and bottom rail (Lock Rail and Kick Rail) of size should be 23x130mm. The partition should be paneled with 9mm pre-laminated particle board to a height of 0.91mfrom the bottom, and remaining height with 5mm thick plain glass With Ethyl Propylene Diamine Monomer (EPDM) GasketsThe sections are to be cut to length, mitre joined with corner bracket Centre mullions are to be fixed using mullion cap. Gaskets made of Ethyl Propylene Diamine Monomer (EPDM). Corner brackets made of CRCA with zinc phosphate. Mullion caps made of Glass filled nylon.The above frames should be fixed to the concrete/ masonry wall by means of self expanding screws, and complete for finished item of work.Fixed Partition: Outer frame section size of 46x52 mm, mullion section should be of 46x70mm, fixed beading should be of of 18x25mm icluding cost and conveyance of all materials labour charges etc., complete as directed by the departmental officers. Rear Block Ground Floor (As Per SSR 2023-24)

Providing full height aluminium partitions at rear block ground floor;Supply and fixing false ceiling using 8 mm thick Cement Bonded particle boards conforming to IS 14276 with galvanized and pre painted steel T section of size 24mm x 38mm x 0.3 mm for main T duty pre punched to accept cross T section of size 24mm x 30mm x 0.3 mm duly punched at both ends for insertion into main T. The grid size will be 610mm x 610mm. The framework (grid) is suspended to the roof by using G.I flat of 0.60mm or 14-gauge G.I wire with necessary fixers to the roof and framework the cost is inclusive of necessary hardware, labour, one coat of primer (Both side) and two coats of smooth finish on visible side. etc., complete as directed by the departmental officers. Rear Block Ground Floor (As per SSR 2023-24, Sl no 448 item code TBSC-K.1-28 PG NO 70.).

Providing full height aluminium partitions at rear block ground floor;Supply of PVC / LPEInsulated Sheathed Multi Core Bright Annealed Bare Copper Conductor HeavyDuty Industrial Cables for Voltage Gradeupto 1100 Volts as per IS: 694:1990including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells /Polycab / RPG / KEI / Gloster / V-Guard /Finecab / SPM / Gemini / Unistar /Windsor / Payal / Fortune Arrt / Avocab /Pawancab / Nakoda / HPL / Sudhakar etc., complete as directed by the departmental officers. As per SSR 2023-24 pg no 273 Sl no. 144 item no. ELEC-1. 5. 1. 22.96 x 3 runs = 68.88 Rmt 68.88 + 31.00 = 99.88