Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and delivery of 4" dia pressure guage filled with glyserine, 7kg/Cm2 capacity with necessary stop cock 3/8" MS pipes etc., complete

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of gauge Gl sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;11 KV Hand gloves

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652-2006 with Class A insulation having 2mm thicknes upto 3.3 KV

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and transportation of 90W LED Street light Body| made of high grade pressure die - cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates LUMINAIRE MAKE: PHILIPS/OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS/POLYCAB / SURYA / Capart / Fortune Arrt / Goldwyn / Panasonic/ Arraystorm / GM / Goldmedal / Silicon / Orient / HPL / Valmont / Transrail LED MAKE: PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/LG LED

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply & Fixing of Gl Flat 40 x 6mm Strip for body earthing.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Labour charges for fixing of butterfly valves, non-return valves, expanssion bellows, rubber packing bolts and nuts site welding with 3 line arc welding making leak proof, including wages for welders, helpers, fitters etc., including hire charges for welding transformer machine gas cutting equipment etc., complete as directed by the departmental officers. up to delivery header.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply of 6 Sqmm WPTC (Weather Proof Twin Core) ISI mark Alluminium Wire.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply of 3.5 core 240sq.mm XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part I) Makes: Torrent/Unicab / Universal / Polycab / Havells / Finolex

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;300 mm dia 'C' Class

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and fixing of trolly for moving of chaipulley set on the hand operated crane 8 tons capacity.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Manufacturing, supply, delivery of 300 mm MS flanges of 18mm thickness with making holes to flanges including cost of MS and its fabrication, coloring with epoxy on both sides cost and conveyance etc complete as directed by the departmental officers.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and delivery of 300mm dia Cl flanged spiral type SS expanssion joint with suitable Gl stud sets, PN-16

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply, fabrication and fixing of 4 pole structure for hand operated crane fabricated with 225x110x11.8 mm in size, for verticle poles, harizontal supports and track, including, excavation, CC for fixing of the poles, complete as directed by the departmental officials.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Interiors are painted with 1+2 coat of O.B.D.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and fixing of pump motonitering unit (PMU) along with 4 core copper controll cabling, water sensor cables, complete

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Manufacture, Supply and delivery of DI D/F Swing Check Valves Slanted/ Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG-40/SG 400/15 or GGG-50/SG-500/7 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per requirement of dept.. Specification and Dimensions as per I.S 5312 or equivalent codes. DI D/F Non Return Valve 300 mm PN-16 as directed by the departmental officers.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and fixing of 40mm GI bend pipes, fixing of 90W street lights including cost of pipes and labour charges

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply of 50 Sqmm 4 Core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc complete. Makes: Finolex / RR kabel / Havells / Polycab complete as directed by dept officers.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Manufacture, Supply and delivery of 300 mm dia DI D/F Butterfly Valves with GGG-40/SG-400/15 or GGG-50/SG 500/7 or equivalent grade as per I.S.3896-part 2-1985 and ubsequent revisions, Double eccentrically Disc.. with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay, with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per requirement of dept. PN-16

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes: Jindal Hissar / Tata pipes 250mm Dia

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Exterior walls are painted with one coast of primer and 2 coats of exterior emulsion paint.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Manufacturing, supply, delivery of 200 mm MS flanges of 18mm thickness with making holes to flanges including cost of MS and its fabrication, coloring with epoxy on both sides cost and conveyance etc complete as directed by the departmental officers.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Erection, testing and commissioning of the 100HP pump set, electrical panel boards, cables, cable terminations etc., by engaging high skilled labour and qualified enginer, as directed by the departmental officials.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and fixing of chan pulley set with required steel chains suitable for lifting of 100HP submersible pump sets.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Painting:-1) Steel structure is to be painted with 2 coats of Grade I enamel paint.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and delivery of 415V 400Amps main control switch gear panel board fabricated in 14 guage CRC sheet on MS Chanel frame floor mounting with powder coated for operation of 2 nos. of 100HP pump sets. The switch gear panel board is to be manufactured by any aprooved CPRI certificate holder with the following accessories etc., a) 400A 50KA adjustable MCCB -1no. b)315 Amps Al Bus bars c) 250A 36KA MCCBS-2 no.s, d) variable frequency drive (VFD) with maximum capacity of 200A with all accessories like electronic display, RPM meter, f) Ammeter 200/5 3nos., 0-500 volt meeter 1no. g) sellector switches RYB for ammeter and volt meter h) suitable CT coils k) push buttons R,G&O) RYBG indication lamps 2 sets, 60 KVAR capacitors of L&T make with APFC relay, required duty contactors, push buttons, auto/mannual sellector switch 63A 3pole MCB-2nos., including required chokes for protection of VFDs, complete as directed by the department officials.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply of cable glands lugs and insulation materials suitable for 3.5 core 240sq.mm armoured alluminium cable

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Shock instrution chart in English / Hindi /Telugu duly framed with front glass.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated oft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG-400/15 or GG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per S5163-89/IS14846- 2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept 100 mm dia PN-16

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Supply and fixing of Co2 4.5 Kg capacity type extinguisher with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683. For electrical room

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;100 mm dia 'C' Class

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Manufacturing, supply, delivery of 100 mm MS flanges of 18mm thickness with making holes to flanges including cost of MS and its fabrication, coloring with epoxy on both sides cost and conveyance etc complete as directed by the departmental officers.

Supply, Delivery, Erection and Commissioning of 75 KW/100HP horizontal submerged centrifugal pump;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept. 100mm dia PN16.