Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Manufacturing, supplying, delevery at site and laying of 500 mm internal dia of MS pipes with 10 mm thick mild steel plates IS:2062-1992, with three run arc welding in 5 m or suitable lengths to suite the site conditions and as directed by the departmental officers and inlining the fabricated pipes with CM(1:2) prop 12 mm thick duly fixing 4 nos of 6mm dia MS rings at each end of the pipe and out coating the pipe with CM(1:3) prop 30mm thick by shortcreting or guniting duly providing wiremesh of size 50x50x3 mm including cost of steel plates and all other required materials and including all taxes and duties ,hoisting , and carefully lowering the pipes in to the ready made trenches or keeping in position on pedastals or supports and laying them true to the alignment and gradient and perfect lining by jacking and jointing with three line arc welding and lining and out coating fielded welded joints including hydraulic testing to a factory test pressure of 14 kg/cm2 and field test pressure of 10 kg/cm2 etc., complete as directed by the deptl. Officers.

Manufacture supply and delivery of 450 mm dia M.S pipe fabricated with 10mm thick MS plate including cost of all materials, labor charges, welding charges, painting with epoxy black on both sides, transportation charges etc., complete as directed by the departmental officers.

Manufacture, Supply and Delivery of R.C.C.NP-2 class Spun / Vibrated Cast(Reinforced) Plain ended pipes conforming to B.I.S 458/2003, Ex-factory,coller including transportation,Lowering laying and jointing with collar jointing excluding taxes etc., complete as directed by the departmental officers.

Manfacturing and supply of 500x500x500 Tee following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete for finished item of work.etc., complete as directed by the departmental officers.

Manfacturing and supply of 500x90 deg Bend following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete for finished item of work.etc., complete as directed by the departmental officers.

Manfacturing and supply of 500x450 Reducer following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete for finished item of work.etc., complete as directed by the departmental officers.

Manfacturing and supply of 500x500x450 Tee following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete for finished item of work.etc., complete as directed by the departmental officers.

Manfacturing and supply of 450x450x450 Tee following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete for finished item of work. complete as directed by the departmental officers.

Manfacturing and supply of 500mm dia tail piece sets Tee following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete for finished item of work. etc., complete as directed by the departmental officers.

Manfacturing and supply of 450mm dia tail piece sets Tee following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete for finished item of work. etc., complete as directed by the departmental officers.

Manfacturing and supply of 500 mm dia MS Flange 20 mm thick following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete as directed by the departmental officers.

Manfacturing and supply of 450 mm dia MS Flange 18 mm thick following Mild Steel bends and specials as per IS:7322 with three run arc welding using MS plate of following thick ness as per specification drawings and as directed by department officers, including epoxy coating of specials inside and outside including cost of Ms plates, welding rods, and all other required materials, inclusive of all all taxes and duties and delivery of fabricated bends and specials to site, and hoisting and carefully lowering into the ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect linling by jacking and jointing with three run arc welding and including of cost of all jointing materials, cost of necessary testing equpment, labour charges andfield hydraulic testing to the required pressure etc., complete for finished item of work. etc., complete as directed by the departmental officers.

Manufacture, supply and delivery of Single chamber DI Air Valve with Body and cover in Ductile iron of grade GGG 40/SG - 400/15 or GGG-50/SG-500/7 or equivalent grade as per IS 3896 – part 2 – 1985 and subsequent revisions. All internal parts such as float, sheel etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept. including transportation charges etc., complete as directed by the departmental officers.

Manufacture supply delivery and fixing of 100 mm dia S/F M.S ‘Stem’ fabricated 0.30 mts long with 10 mm thick M.S plate and 25 mm thick M.S plate for Flanges including cost of all materials, labour charges, welding charges, painting with epoxy black both sides, and transportation charges etc., complete as directed by the departmental officers.

Cutting of 500mm dia CI/DI pipes with out water in the main, including incidental and operational charges etc., complete as directed by the deptl. Officers

Cutting of 450mm dia CI/DI pipes with out water in the main, including incidental and operational charges etc., complete as directed by the deptl. Officers

Bailing out 10 HP pump water from the pipe line trenches with oil engine driven pumpset, including hire charges, fuel charges and wages for pump driver and helper etc. complete as directed by the deptl. Officers.

Bailing out 5 HP pump water from the pipe line trenches with oil engine driven pumpset, including hire charges, fuel charges and wages for pump driver and helper etc. complete as directed by the deptl. Officers.

Supply and placing of the RCC M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER( Weigh batch at site) with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, water proofing compound of standard make mixed at a rate of 1 Kg/per bag of cement of 50 Kgs., as specified by departmental officers at site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content(400 Kg per Cum) as per IS code , centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work etc., complete as directed by the departmental officers.For Base slab

Supply and placing of the RCC M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER( Weigh batch at site) with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, water proofing compound of standard make mixed at a rate of 1 Kg/per bag of cement of 50 Kgs., as specified by departmental officers at site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content(400 Kg per Cum) as per IS code , centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. complete as directed by the departmental officers. For side walls etc.

Supply and placing of the RCC M30 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER( Weigh batch at site) with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, water proofing compound of standard make mixed at a rate of 1 Kg/per bag of cement of 50 Kgs., as specified by departmental officers at site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content(400 Kg per Cum) as per IS code , centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work., complete as directed by the departmental officers.For side walls.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars of TATA,SAIL,VSP, Jindal as approved by Ministry of Steel (Fe 500/500D/550D grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) (5% extra for wastage on reinforcement rods below 36mm dia. Including overlaps) etc., complete as directed by the departmental officers.

Labour charges for Lowering and Keeping in position of 500mm dia CI/DI sluice valves reflux valves and scour valves etc. compledte as directed by the deptl. Officers as directed by the deptl. Officers.

Labour charges for Lowering and Keeping in position of 450mm dia CI/DI sluice valves reflux valves and scour valves etc. compledte as directed by the deptl.

Jointing of 500 mm dia DI / D/F pipes, fittings and valves with flanged ends including the cost of jointing material such as bolt, nuts, rubber insertion, white lead and including filling with a water lead upto 500 M and testig to required pressure etc., complete as directed by the departmental officers.

Jointing of 450mm dia DI / D/F pipes, fittings and valves with flanged ends including the cost of jointing material such as bolt, nuts, rubber insertion, white lead and including filling with a water lead upto 500 M and testig to required pressure etc., complete as directed by the departmental officers.

Labour charges for fixing of 100mm dia Air valves with isolated sluice valve double air valve etc. complete as directed by departmental officers.

Construction of sluice valve chambers on water supply feeder mains with CC 1:4:8 prop. of required thickness along with FRC cover and frame and laying CC 1:2:4 prop. including cost of materials labour charges earth work, curing, C.C. and conveyance etc. complete as directed by the deptl. officers.(450 mm dia / 500 mm dia Sluice valves)

Manufacturing, supply and errection of Air valve guard cabin of size 1.8x1.8x1.8 mm maide with 8 nos vertical and 8 nos horizontal MS angles of size 75x50x6 mm and 10 mm dia MS square bars fixed at 5 cm c/c with door and locking arrangements as per approved drawing as directed by the deptl. officers and painting both sides with anticrossive epoxy two coats over one coat of primary coat including cost of all materials, fabrication welding transportation to site and fixing in position duly embodying in CC (1:1, 5:3) Prop. and all other incidental and operational charges etc complete as directed by the departmental officers. (100 mm dia air valves)

Supply of good quality gravel for filling where ever required as directed by departmental officers including cost and conveyance of gravel, stacking, levelling, watering, tamping rolling, all leads, labour charges and other incidental and operational charges etc. complete. sheet Rock Qty. etc., complete as directed by the departmental officers.

Supply, delivery and filling of quarry dust (50% Rubbish 50% HBG Stone 2.36mm) where ever required as directed by departmental officers including cost and conveyance stacking leveling watering tampering rolling all leads labour charges and other incidential and operational charges etc., complete as directed by the departmental officers.

Making dummy arrangement to 500 mm dia on MS main including cost of MS socket tail piece with MS dummy plate and of pig lead spun yarn and cost of jointing material and all labour charges etc. complete (Data enclosed) etc., complete as directed by the departmental officers.

Refilling the pipe line trenches for pipe line with excavated earth including watering and tamping etc. complete as directed by the departmental officers.

Carting away surplus excavated soils, rock from the pipeline trenches to a suitable distance including loading, unloading charges, cost of conveyance, labour charges all lifts and other incidental and operational charges etc., complete.as directed by the departmental officers.

(Rupees only)