Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Chanchalguda Jail road;Refilling the pipe line trenches with using excavated soils other than sand with standard specification including watering and tamping in layers of 225mm etc., complete to the finished item as directed by the H.M.W.S.&.S. Board Engineers.

Chanchalguda Jail road;Jointing 300mm dia CI/DI DF pipes and specials , sluice valve with flanged end including cost and joitning materials such as nut bolts rubber insertion with a lead of 500 mtrs required pressure etc., complete as directed by the H.M.W.S.&. S. Board Engineers.

Chanchalguda Jail road;Lowering of 300mm dia of SWG pipes into the trenches and laying them true to alignment and gradient and jointing with air tight cement joints in CM 1:1 prop,including cost of jointing materials and labour charges etc., complete as directed by the HMWS&SB Engineers.

Chanchalguda Jail road;Dismantling and re-construction of CRS masonry in CM (1:6) prop: with available stones including cost and conveyance of all materials, labour charges, curing etc., complete as directed by the H.M.W.S.&.S. Board engineers.

Chanchalguda Jail road;Bailing out of water including hire charges of diesel pump set, fuel and labour charges etc. complete as directed by the H.M.W.S.&.S. Board Engineers. ( 5 HP Pump ( 5HPX2Days X 10HR)

Chanchalguda Jail road;Bailing out of water including hire charges of diesel pump set, fuel and labour charges etc. complete as directed by the H.M.W.S.&.S. Board Engineers. ( 10 HP Pump ( 5HPX 5Days X 10HR)

Chanchalguda Jail road;Barricading, hoarding, lighting and Watching etc., for water supply and sewerage work line trenches etc., complete as directed by the HMWS&SB Engineers.

Chanchalguda Jail road;Excavation excavation and depositing on bank in hard rock boulders including stacking for pipeline trenches in inhabited areas such as urban areas, ( where conventional blasting can not be done) for drainage and water supply pipeline trenches by benching, chiselling, wedging sheet rock, including all incidental and operatinal charges etc., complete as per specification drawings and as directed by the departmental officers, and to protecting the existing water supply lines, sewers, power cables, telephone cables/ducts, storm water drains, traffic signals etc., wherever it is possible so as not to disturb the existing utility services etc., taking all precautionary measures in the restricted areas such as urban areas diversion of the traffic , removal of stumps and other deleterious material and disposal upto a lead of 10m dressing of sides and bottom and excluding backfilling for pipe line trenches and manhole chambers, including all incidental and operational charges etc., complete to the finished item of work as directed by the HMWS&SB Engineers. ( P6 to P15+ Road crossing ) (Asmangadh GLSR Line )

Chanchalguda Jail road;Earth work excavation and depositing on banks for pipe line trenches with an initial lead of 10 m. and lift of 2 m in all available soils including labour charges, all operational and incidental charges etc., complete as directed by the H.M.W.S.& S. Board Engineers.( P6 to P15+ Road crossing ) (Asmangadh GLSR Line )

Chanchalguda Jail road;Cutting of C.C Road surface iincluding hire charges all machinery, tool and plants, labour charges, and other incidental and operational charges etc, complete. For proposed 600mm dia MS line from Saidabad to Chanchalguda Jail road etc. complete to the finished item of work as directed by the HMWS&SB Engineers. ( P6 to P15+ Road crossing ) ( Asmangadh GLSR Line )

Chanchalguda Jail road;Cutting of open B.T Road surface including hire charges all machinery, tool and plants, labour charges, and other incidental and operational charges etc, complete. For proposed 600mm dia MS line from Saidabad to Chanchalguda Jail road etc. complete to the finished item of work as directed by the HMWS&SB Engineers. ( P6 to P15+ Road crossing ) ( Asmangadh GLSR Line )

Chanchalguda Jail road;Manufacture, supply and delivery of DI D/F Butterfly Valves with GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per IS-3896-part-2-1985 and subsequent revisions, double eccentrically Disc, with renewable soft seal on the disc and Body seat face of stainless steel/nickel weld overlay, with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimesions as per etc., complete to the finished item of work as directed by the HMWS&SB Engineers. AWWA C 504 or BS 5155 or IS: 13095 (Drilled as per requirement of dept. PN-16 )

Chanchalguda Jail road;Manufacture, supply and delivery of MS pipes confirming to IS 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia MS Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by shortcreting or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labour charges, transportation to anywhere in Telangan state, but excluding all taxes etc., complete as directed by the H.M.W.S.& S. Board Engineers.