Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Barricading, hoarding, lighting and watching etc., for water supply and sewerage works for trenches of depths upto 6’-0” (2 Meter) below G.L with Bamboos, Casurina ballies as per the design duly excavating pits and its removal after function is over incluidng hire charges of barricading material as per schedule given by the departmental authorities complete for finished item of work.

Providing shoring and strutting for excavation of trenches for laying pipe lines including cost and conveyance of all materials, labour charges and removal of shoring and shuttering at appropriate places as directed by the departmental officers with all incidental and operational charges etc, complete Single staging from 0 to 2.5 M (15% of the total length)

Providing shoring and strutting for excavation of trenches for laying pipe lines including cost and conveyance of all materials, labour charges and removal of shoring and shuttering at appropriate places as directed by the departmental officers with all incidental and operational charges etc, complete Double staging from 2.5 M and above (10% of the total length)

Bailing out water from the pipe line trenches with oil engine driven pumpsets, including hire charges, fuel charges and wages for Driver and Helper etc complete as directed by the departmental officers.

Manufacturing and supply of following Mild Steel Pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including hydraulic testing to the required test pressure of 24 Kg/Sq cm at factory including inlining with cement mortar (1:2) 15/12mm thick using 6 Nos.of 6mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers for 600mm dia pipeline with 10mm thickness

Manufacturing and supply of following Mild Steel Pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including hydraulic testing to the required test pressure of 24 Kg/Sq cm at factory including inlining with cement mortar (1:2) 15/12mm thick using 6 Nos.of 6mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers for 300mm dia pipeline with 10mm thickness

Manufacturing and supply of following Mild Steel Plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including 10 % Radio graphic testing at factory and 100 % Ultra sonic testing at field welded joints and Hydraulic testing at 16 Kg/Sq cm pressure at factory with approved quality epoxy painting of 400microns and outcoated with bituminus coal tar of 400microns including cost of MS Plates, welding rods and all other required materials, and inclusive of delivery of fabricated epoxy painted pipes to site hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inside and outside of field welded joints with epoxy painting and coaltar as per the above specification inclusive of cost of all jointing materials, labour charges and hydraulic testing of pipeline to a field test pressure of 10 Kg/ Sqcm in convenient stretches and as directed by departmental officers inclusive of cost of the necessary testing equipment and other incidental and operational charges etc., complete as directed by the depatmental officer for 100mm dia 8mm thick

Manufacturing and supply of following Mild Steel Plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including 10 % Radio graphic testing at factory and 100 % Ultra sonic testing at field welded joints and Hydraulic testing at 16 Kg/Sq cm pressure at factory with approved quality epoxy painting of 400microns and outcoated with bituminus coal tar of 400microns including cost of MS Plates, welding rods and all other required materials, and inclusive of delivery of fabricated epoxy painted pipes to site hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inside and outside of field welded joints with epoxy painting and coaltar as per the above specification inclusive of cost of all jointing materials, labour charges and hydraulic testing of pipeline to a field test pressure of 10 Kg/ Sqcm in convenient stretches and as directed by departmental officers inclusive of cost of the necessary testing equipment and other incidental and operational charges etc., complete as directed by the depatmental officer for 50mm dia 8mm thick

Manufacturing and supply of following Mild Steel Pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including hydraulic testing to the required test pressure of 24 Kg/Sq cm at factory including inlining with cement mortar (1:2) 15/12mm thick using 6 Nos.of 6mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers 600mm ID bends upto 0-30° Bends

Manufacturing and supply of following Mild Steel Pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including hydraulic testing to the required test pressure of 24 Kg/Sq cm at factory including inlining with cement mortar (1:2) 15/12mm thick using 6 Nos.of 6mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers 600mm ID bends from 31° to 60° Bends

Manufacturing and supply of following Mild Steel Pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including hydraulic testing to the required test pressure of 24 Kg/Sq cm at factory including inlining with cement mortar (1:2) 15/12mm thick using 6 Nos.of 6mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers 600mm ID bends from 61° to 90° Bends

Manufacturing and supply of following Mild Steel Pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including hydraulic testing to the required test pressure of 24 Kg/Sq cm at factory including inlining with cement mortar (1:2) 15/12mm thick using 6 Nos.of 6mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers 300mm ID bends upto 0-30° Bends

Manufacturing and supply of following Mild Steel Pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including hydraulic testing to the required test pressure of 24 Kg/Sq cm at factory including inlining with cement mortar (1:2) 15/12mm thick using 6 Nos.of 6mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers 300mm ID bends from 31° to 60° Bends

Manufacturing and supply of following Mild Steel Pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including hydraulic testing to the required test pressure of 24 Kg/Sq cm at factory including inlining with cement mortar (1:2) 15/12mm thick using 6 Nos.of 6mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers 300mm ID bends from 61° to 90° Bends

Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG40/SG 400/15 or GGG50/SG 500/7 or Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay, with powder or liquid epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504:80 or BS 5155 or IS:13095 drilled as per requirement of department inclusive of transportation to work site, loading, unloading and hoisting and carefully lowering the valves into trenches / chambers, laying true to alignment and gradient and perfect lining and jointing including cost of nuts, bolts, and rubber gaskets packing including field hydraulic testing to a required pressure etc as directed by the departmental officers including other incidental and operational charges etc., complete for finished item of work / Pen stock arrangement as directed by the departmental officers 600mm dia BF Valve

Manufacture, Supply and delivery of 300mm dia DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538 including all taxes and duties including two numbers of suitable MS tail pieces and all other required materials, testing charges, inclusive of all taxes and duties, transportation to work site, loading, unloading and hoisting and carefully lowering the valves into trenches / chambers, laying true to alignment and gradient and perfect lining and jointing including cost of carbon steel nuts, bolts, and rubber gaskets packing including hydraulic testing to a required field pressure etc., complete for finished item of work as directed by the departmental officers for Scour Valves 300mm dia DI D/F Gate Valves , for Scour Valve

Manufacture, supply, delivery, hoisting, lowering & fixing at work site one set consisting of 1 no 100mm/50mm dia ductile iron single chamber D.I air valve (PN 16) with body and cover in ductile iron of grade GGG-40/SG 400/15 or GGG-50-500/7 or equivalent grade as per IS-3896-part-2-1985 and subsequent revisions all internal parts such as float, shell, etc all cover bolts, of stainless steel, and gaskets and seals of EPDM food grade quality epoxy powder coating (EP-P) inside and outside colour blue drilled as per requirement of department and one 100mm/50mm dia D.I. D/F gate valve and (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG-40/SG 400/15 or GGG-50/SG 500/7 or equivalent grade as per IS 3896-part 2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be caccum tight and 100% leak proof with face to face dimensions as per BS.5163-89/IS-14846-2000/DIN 3202-F-4. The valve should be with electrostatic powder coating both inside and outside pocketless body passage drilled as per requirement of department including all incidental operation charges cost of double flanged joints etc as directed by the deparmental officers for 100mm dia Air Valve

Manufacture, supply, delivery, hoisting, lowering & fixing at work site one set consisting of 1 no 100mm/50mm dia ductile iron single chamber D.I air valve (PN 16) with body and cover in ductile iron of grade GGG-40/SG 400/15 or GGG-50-500/7 or equivalent grade as per IS-3896-part-2-1985 and subsequent revisions all internal parts such as float, shell, etc all cover bolts, of stainless steel, and gaskets and seals of EPDM food grade quality epoxy powder coating (EP-P) inside and outside colour blue drilled as per requirement of department and one 100mm/50mm dia D.I. D/F gate valve and (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG-40/SG 400/15 or GGG-50/SG 500/7 or equivalent grade as per IS 3896-part 2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be caccum tight and 100% leak proof with face to face dimensions as per BS.5163-89/IS-14846-2000/DIN 3202-F-4. The valve should be with electrostatic powder coating both inside and outside pocketless body passage drilled as per requirement of department including all incidental operation charges cost of double flanged joints etc as directed by the deparmental officers for 50mm dia air valve

Refilling with usefull available excavated earth / soils in trenches ,sides of foundations & basement and the pipeline trenches after laid, jointed, executed, tested with intial lead in layors not exceeding 15 cm thick , consolidating each deposited layer by watering consolidting each layer by watering and ramming including cost and conveyonce of water to work site and all operational ,incidental,labour charges,hire charges of T&P .,complete for finished item of work as directed by the departmental officers.

Collection, Supply and spreading the Gravel and consolidating each deposited layer by layer, watering and compacting including cost and conveyance of gravel and water to work site and all operational, incidental, labour charges etc., complete for finished item of work as directed by the departmental officers.

Carting surplus excavated Earth/Rock from the site to a distance of about 10 kms including loading,unloading ,conveyance and dumping,labour charges, all leads and lifts,all other incidental and operational charges etc complete as directed by the departmental officers.

Manufacturing ,Supplying and erection of air valve guard cabins of size 1.8x1.8x1.8 m made with 8 nos vertical and 6 nos horizontal MS angles and Top and also 4 No's at Bottom of size 70x70x6 mm and 10mm size MS square bars fixed at 5 cm c/c with door and locking arrangements as per approved drawing and as directed by the departmental officers and painting both sides with anti corrosive paint two coats over one coat of primary coat including cost of all materials , fabrication ,welding , transportation to site, all taxes and duties,fixing in position duly embodying in M15 grade concrete, and all other incidental and operational charges etc complete for finished item of work as directed by the departmental officers.

Plain Cement Concrete M10 Nominal Mix; using 6-20 mm guage graded metal hard granite machine crushed metal including cost and conveyance of all materials coarse and fine agregate(As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018,the Government have directed all the Engineering works Departments to useManufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 in all the mixes of Cement concrete and in the items of works) to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as directed by the departmental officers.

Plain Cement Concrete PCC M 20 Nominal Mix; using 20 mm guage graded hard granite machine crushed metal including cost and conveyance of all materials coarse and fine agregate(As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018,the Government have directed all the Engineering works Departments to useManufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 in all the mixes of Cement concrete and in the items of works) to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete as directed by the departmental officers.Thrust Blocks

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018,the Government have directed all the Engineering works Departments to useManufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 in all the mixes of Cement concrete and in the items of works)coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,including centering, shuttering as directed by the departmental officers as directed by the departmental officers. Chamber Bottom Floor Slab

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018,the Government have directed all the Engineering works Departments to useManufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 in all the mixes of Cement concrete and in the items of works)coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,including centering, shuttering as directed by the departmental officers Chamber Side Walls

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (As per GO Ms No 37 Industries and Commerce(Mines-I) Dept, dated 29.05.2018,the Government have directed all the Engineering works Departments to useManufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 in all the mixes of Cement concrete and in the items of works)coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,including centering, shuttering as directed by the departmental officer Chamber Roof Slab

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames of H.D.-35 with 560mm dia clear opening with ISI marking anywhere in Telangana, including, loading, un-loading & stacking at site including labour charges and all other incidental and operational and operational charges etc., complete as directed by the departmental officers.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars of TATA,SAIL,VSP, Jindal as approved by Ministry of Steel (Fe 500/500D/550D grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors.( APSS No.126) as directed by the departmental officers.

Manufacturing, supply and erection of Galvanised Mild Steel Ladders with 2 Nos of 65mm x 20mm flat Galvanised Mild Steel stringers and 25mm dia solid mild steel rungs welded at 230mm c/c spacing, and hoops welded to stringers as per specification drawings and as directed by departmental officers including galvanisation of entire assembly by hot dipping after fabrication and fixing in M20 concrete with epoxy resin bolts drilled in to the base and walls including cost of all materials, fabrication charges, welding, transportation to site, including labour charges for fixing in position and all other incidental and operational charges etc., complete for finished item of work as directed by the departmental officers.