Bharat Heavy Electricals Limited Tender

Scarifying the existing bituminous road surface, recarpeting the surface by using tack coat in bottom bitumen emulsion (rapid setting) complying with IS 8887 - 1995 at 0.5Kg/Sq.m and on top recarpeting with seal coat of premixed fine aggregate (passing 2.36 mm and retain on 180 micron sieve) with bitumen using 128 Kg of bitumen of grade 80/100 bitumen per cu.m of fine aggregate and 0.60 Cu.m of fine aggregate per 100 Sq.m of road surface including rolling and finishing with road roller all complete of min 25mm thick as directed by Engineer-In-Charge.

Providing and laying Bituminous Macadam including pot holes using crushed stone aggregates of specified grading premixed with bituminous binder and filler,transporting the hot mix to work site by tippers,laying with paver finisher equiped with lectronic sensor to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction and density, as per specifications, complete and as per directions of Engineer-In-Charge. 40/50 mm compacted thickness with bitumen of grade VG-30(60/70 grade)@ 5.5% (Percentage by weight of total mix) and lime filler @ 3% (percentage by weight of aggregate) prepared in batch type Hot mix plant of 100-120 TPH capacity etc., complete all as directed by Engineer-In-Charge.

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc., complete as per direction of Engineer-In-Charge and accordance with applicable specifications.

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-In-Charge.

Supply and Applying two or more coats Painting with Synthetic Enamel / Aluminium paint of required shade applied at 1.16 litres / 10 Sq.m to give an even shade on old & new surfaces at all heights of all material surfaces including thorough cleaning & scraping the old surfaces, and cost also includes of all labour, scaffolding and all other incidentals. Enamel Paint / Aluminium Paint and all materials and other incidentals are in Contractor scope. Make: Asian / Nerolac / Berger / Indigo

Brick work with Ground moulded clay FPS brick in super structure above plinth level upto floor five level in cement mortar 1:6 (1 cement : 6 Coarse sand). Cost includes placing two 6 / 8 mm dia MS round / Ribbed steel bars in every fourth layer in case of half brick wall. Cost of placing steel bars shall be paid separately under steel reinforcement. Only cement and steel reinforcement will be issued by BHEL on free of cost at BHEL stores.

Plastering in CM 1:6, 20 mm thick to internal and external surfaces of walls, ceiling including the cost of all materials, labour, curing etc, complete - at all heights and elevations. Only cement will be issued by BHEL on free of cost at BHEL Stores.

Providing and laying in position Plain Cement Concrete of specified grade excluding the cost of centering and shuttering including consolidation by vibrations for all works at all elevations with 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate of 20 mm nominal size). Only Cement will be issued free of cost by BHEL at BHEL stores.

Centering and shuttering including scaffolding, strutting, propping etc., and removal of form work, for foundations, footings, columns, beams, slabs at all elevations & heights etc., All as directed by Engineer-In-Charge.

Fabrication of Structural Steel work including all materials going into the process of fabrication and forming an integral part of steel work together with all shop and site rivets and electrodes for site welding as necessary and all site connections comprising sag rods, floor beams, girders, bracings, trusses and frame work for fixed false ceiling and for movable false ceiling, purlins with channel / angles, MS flat supports including all connections as per detailed drawings connected steel works etc., cleats, gusset plates, all bolts, nuts, washers, base plates, anchor bolts as per detailed drawings, cutting, welding and painting 2 coats of red-oxide primer before erection etc., complete. The rate shall include painting 2 coat of Red-oxide primer as per IS specifications and all charges for handling, leading and loading at the fabrication yard. Only raw structural steel sections, electrodes, gasses only will be issued by BHEL on FREE of cost at BHEL stores.

Erection of Steel work out lined item at above including the charges for handling, leading and stacking at site at approved locations prior to erection including all site rivetting, bolting, jointing and site welding where ever required. (all heights).

Supply and Applying two or more coats Painting with Synthetic Enamel / Aluminium paint of required shade applied at 4.85 litres / 1MT [or 1.16x41.8/10 = 4.85] to give an even shade on old & new surfaces at all heights of all material surfaces including thorough cleaning & scraping the old surfaces, and cost also includes of all labour, scaffolding and all other incidentals - Enamel Paint / Aluminium Paint and all materials, scaffolding and other incidentals are in Contractor scope. Make: Asian / Nerolac / Berger / Indigo (approx. 1MT of steel = 41.8 Sq.m of surface area is considered for measurement and paint applied at 1.16 litres per 10 Sq.m surface area).

Supply and fixing aluminium composite panel (ACP) 4 mm thick with radium sticker letters on Structural steel frames in side/out side the factroy limits including the cost of labour, materials, accessories, adhesives, scaffolding, wastages, transport, fixing with suitable fixers to a neat finish in a esthetic point of view without any undulations in faces. 4MM ALLUMINIUM COMPOSITE PANNEL WITH RADIUM STICKER LETTERS WITH FIXING ON FRAME

Charges for conveying of G.I. Pipes and specials from stores to site (below ground level including upto 3m above floor level/ ground level) including cost of loading, unloading, lowering into trenches, cutting and threading wherever necessary, aligning including jointing and testing etc., complete all as directed by Engineer-In-Charge. G.I. pipes and specials, pig lead, hemp yarn, bolts and nuts, washers, rubber packing, white lead etc., required for the work will be issued free of cost by BHEL at BHEL stores.

all sizes upto and 2" (50 NB) dia. pipes

3" (75 NB) dia. pipes

4" (100 NB) dia. pipes

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc., complete.

250 mm dia RCC Pipe

300 mm dia RCC Pipe