V O Chidambaranar Port Trust Tender

Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers.

Providing Form work including centring, shuttering for wall concrete so as to give a rough finish shuttering and propping etc., complete complying with AISS and as directed by the departmental officers.

Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers.

Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers.

Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade. Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Providing and laying terrace lime concrete weathering course with grade brick aggregate 25 mm nominal size and 50% mortar comprising of 1 lime putty and 2 surkhi and curing including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers.

Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23 cm X 2cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing in position of Wooden panelled door single shutter including cost of hold fasts and applying one coat of wood primer of approved quality, fixing of first quality ISI standard furniture fittings with screws / bolt & nuts, the rate shall include cost of wood, labour for wrought and put up, etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing UPVC WINDOWS( Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles aremulti chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with overall the edges of frame and shutter. The shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers.

Providing and fixing R.C.C. Pre-cast slab 100mm thick of various size in Cement Concrete 1:1.5:3 including all labour, materials, form work, reinforcement, conveyance and fixing the slab etc., complete complying with AISS and as directed by the departmental officers.

Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.

Supplying and laying in trenches 160 mm dia. PVC inflow pipe line 6Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing of 5HP (mud pump) Kirloskar KBL make SP3L+ with 5C4 motor model size 80x80mm, 3.7KW/5HP/415V/50HZ, Selfpriming Coupled Pumpset motor. The cost inclusive of motor, labour, fixing with necessary fixtures, conveyance & functioning etc., complete and as directed by the departmental officers.

Supplying and fixing of Cast Iron Double Flanged non raising type Sluice valve of 100mm dia. confirming to IS:14846 PN 1.0 pattern with high tensile brass spindle and gun metal working parts. The rate including cost of Cast Iron Double Flanged non raising type Sluice valve of 4" dia., removing the existing valve and refixing the new valve with accessories, installation, transportation and labour charges etc., complete and as directed by the departmental officers.

Pumping the surface water from the earthwork portion / Rain water from the low lying area wherever required in the Port area with 5 HP Mud Pump. The cost including hire charges for 5 HP Mud pump, diesel, oil, manpower, etc., complete and as directed bythe departmental officers.