Tamil Nadu Urban Habitat Development Board Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Tamil Nadu Urban Habitat Development Board - TNUHDB Tender
Civil And Construction
Solid Waste Management
Drainage Work
Eprocure
Opening Date12 Apr 2025
Closing Soon15 May 2025
Tender Amount₹ 2,50,54,000
AI Insights
Technical
Technical
Financial
Class Of Bidder
... View More
Class-III
Bid Capacity
... View More
Bid capacity = (AxNx1.5- B) Where, A = Maximum value of civil engineering works executed in any one year during the last five years N = Number of years prescribed for completion of the works for which bids are invited. B = Value, at 2025 - 2026 price level, of existing commitments and on-going works to be completed during the next 4 months
Technical Capacity
... View More
The required prior work experience for the bidder includes having a B.E. (Civil) or equivalent degree holder with three years of experience, or not less than one retired sub-divisional officer and one more B.E. (Civil) or equivalent degree holder. For works valued above Rs.50 lakhs, three B.E. (Civil) or equivalent degree holders with three years of experience, or not less than one retired sub-divisional officer and two more B.E. (Civil) or equivalent degree holders are required. The bidder should have completed a certain percentage of similar works, with a required rate of progress as follows: - 25% of work completed in the 1st month
- 50% of work completed in the 2nd month
- 75% of work completed in the 3rd month
- 100% of work completed in the 4th month Additionally, the bidder should have satisfactorily completed at least one similar nature of building housing/commercial work under a single agreement, with a value of at least Rs. 125.27 Lakhs (50% of the tender value), in the last five years. The bidder's liquid assets should not be less than 20% of the value of the tender, which is Rs. 50.11 Lakhs. The required prior work experience for the bidder also varies based on the value of the works, as follows:
1. For works valued between Rs.1 lakh to Rs.5 lakhs, the bidder should have a Diploma Holder in Civil Engineering or a retired Junior Engineer.
2. For works valued between Rs.5 lakhs to Rs.10 lakhs, the bidder should have a B.E. (Civil) or equivalent degree holder or a retired sub-divisional officer (Assistant Executive Engineer) or a diploma holder with three years of experience.
3. For works valued between Rs.10 lakhs to Rs.25 lakhs, the bidder should have a B.E. (Civil) or equivalent degree holder with three years of experience in Civil Engineering works or a retired sub-divisional officer plus a diploma holder in Civil Engineering with three to five years of experience.
4. For works valued between Rs.25 lakhs to Rs.50 lakhs, the bidder should have a B.E. (Civil) or equivalent degree holder with three years of experience or a retired sub-divisional officer plus two diploma holders in Civil Engineering or two retired Junior Engineers. Alternatively, the bidder can have a B.E. (Civil) or equivalent degree holder with three years of experience or a retired sub-divisional officer and another B.E. (Civil) or equivalent degree holder.
5. For works valued above Rs.50 lakhs, the bidder should have three B.E. (Civil) or equivalent degree holders with three years of experience or a retired sub-divisional officer and two more B.E. (Civil) or equivalent degree holders.
Costs
EMD
₹ 1,36,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_TNUHB_541527_1Tender No
035/DB/2024Tender Authority
Tamil Nadu Urban Habitat Development Board ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
With Initial lead of 10m and additional lift of 5.0 m
78.45
-
-
... More
With Initial lead of 10m and additional lift of 6.0 m
45.8
-
-
... More
With Initial lead of 10m and additional lift of 7.0 m
28.7
-
-
... More
Filling in foundation and basement with Quarry dust or stone dust including all cost of materials and conveyance and proper watering ramming and consolidation complying with relevent standard specification etc. complete in all respects as directed by the departmental officers.
65.1
-
-
... More
Cement concrete 1:5:10 (one of cement, five of M-sand and Ten of hard broken stone) using 40mm size hard broken stone for foundation inclusive of shoring, strutting, bailing out water, ramming, curing, etccomplete in all respects as directed by the departmental officers.
65.1
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS: 456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (Plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accerlerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming extra etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials.)
576.88
-
-
... More
Providing form work for centering, shuttering etc., for all reinforced concrete work such as plinth beam, raft beam, raft slab, grade beam etc., including strutting and shuttering wherever required using MS sheets of suitable size of BG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5 cm (Spaced about 91cm center to center) distance and supported by casurina props of size 10cm-13cm dia (spaced at 75 cm center to center) and removing the same after a specified period without damaging RCC works in all floors etc., complete in all respects as directed by the departmental officers. For Grade Beam, Plinth beams,Column Footings etc..,
1816.37
-
-
... More
Providing form work for centering, shuttering etc., for all reinforced concrete work like slab, beams, lintels, loft etc., including shuttering, upto 3.00m high using MS sheet of size 90cm x 60cm and BG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5 cm (Spaced about 91cm center to center) distance and supported by casurina props of size 10cm-13cm dia (spaced at 75 cm center to center) and removing the same after a specified period without damaging RCC works in all floors etc., complete in all respects as directed by the departmental officers. (Slabs, Lintels & Lofts) For slabs, linets, beams etc.,
110.39
-
-
... More
Fabricating and placing the following kinds of steel grills Fe 500 D grade steel reinforcement bars as per IS 1786-1985 for all reinforced cement concrete works such as plinth beam, lintels, beams, sunshade, roof and floor slabs etc., including cost of steel and fabricating the reinforcement grills in position etc., complete in all floors (The rate to include the cost of binding wire steel also)
86.6
-
-
... More
Plastering with Cement mortar 1:3 (one cement and Three of P- sand) 20mm thick with necessary water proofing compound at the rate of 1.06 kg per 10m2 including finishing smooth, setting, curing etc., complete in all respects as directed by the departmental officers.
974.35
-
-
... More
Plastering the walls with cement mortar 1:5 (One of cement and five of P-sand) 12mm thick including scaffolding, finishing smooth, setting, curing etc., complete in all respects as directed by the departmental officers.
344
-
-
... More
Supplying & fixing C.I. Step of size 14" of approved brand having ISI mark officers etc., complete in all respects as directed by the departmetal officers.
40
-
-
... More
Filling in basement with 40mm size hard broken jelly in drying beds in other similar works including cost of materials, labour charges etc., all complete and directed by the departmental officers.(For filter media)
9
-
-
... More
Filling in basement with 20mm size hard broken jelly in drying beds in other similar works including cost of materials, labour charges etc., all complete and directed by the departmental officers.(For filter media)
9
-
-
... More
Filling in foundation and basement with filling M-sand in layers of not exceeding 15 cm thick well watered, rammed and consolidated complying with relevant standard specification including the cost of supplying filling m-sand etc., complete in all respects as directed by the departmental officers.
9
-
-
... More
Providing Ellis Pattern flooring 20mm thick (Ellis pattern) with layer of cement concrete 1:3 (one of cement and three of hard broken stone) (No sand) using hard blue granite chips of size 3mm to 10mm and surface rendered smooth over RCC slab including supplying and fixing 20mm dia GI pipe outlet etc., complete in all respects as directed by the departmental officers.
11
-
-
... More
Brick work in cement mortar 1:6 (One of cement and six of M-sand) using Fly ash Bricks of size 230×110×70mm for super structure in the following floors including fixing the frames of doors and windows, scaffolding, proper setting curing etc, complete in all respects as directed by the departmental officers. Foundation & Basement
14
-
-
... More
Ground Floor
19
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One of Cement and Three of P-sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
11
-
-
... More
Weathering course in concrete broken brick jelly 20mm size in pure slacked lime over RCC roof slab the proportion being 32:12 1/2 (Thirty two parts of broken brick jelly and twelve and half of slacked lime) laying to a thickness of 110mm and compacked and well beaten to 80mm by using wooden hand beater of weight not exceeding 2 kg hand beating sprinkling liberally with lime water and a small proportion of solution prepared by soaking kadukkai dry nut powder and jaggery (vellam) and giving required slope and thickness on roof etc. complete in all respects as directed by the departmental officers.
9
-
-
... More
Finishing the top of roof slab with one course of Hydraulic pressed tiles 23cm x 23cm x 2cm using cement mortar 1:3 (One of cement and three of M-sand) mixed with water proofing compound at 2% by weight of the cement and pointing with the same mortar, finishing, curing etc., complete in all respects as directed by the departmental officers.
9
-
-
... More
Painting the walls with two coats of cement paint of approved brand and quality over one coat of white cement including the cost of cement paint, brushes, scaffolding etc., complete in all respects as directed by the departmental officers.
344
-
-
... More
Painting the new iron work with one coat of first class synthetic enamel paint of approved quality and colour in addition over the existing primer coat including the cost of paint patty brushes and scaffolding etc. complete in all respects as directed by the departmental officers
8
-
-
... More
Supplying and fixing of 110mm dia PVC Rain water downfall pipe of 4 kg/cm² conforming to IS 13592-1992 (Type-A) with necessary bends, shoes, cost of special clamps, coupler if necessary including cost of solvent cement, proper aligning, teakwood plugs of approved quality etc., complete in all respects as directed by the departmental officers.
4
-
-
... More
Supplying and fixing of MS Grill for fixed grills using MS angle (IS 808-1989) and MS sheet of specified size and gauge including the cost of furniture fittings, welding, finishing and including painting one coat of primer with red oxide primer of approved quality etc., complete as directed by the departmental officers.
40
-
-
... More
Fabrication and supply of M.S Door of overall size 910mm × 2100mm with MS angle frame for three sides using angle of size 35mm × 35mm × 5mm (IS 808 - 1989) using the same angle for hold fasts (6 nos of 200mm long), MS flat for bottom side using flat of size 32mm × 6mm with suitable door shutter (single leaf) using 22 gauge GI sheet (IS 277 - 1992) and MS angle frame alround using the angle of size 25mm × 25mm × 3mm (IS 808 - 1989), shutters with single leaf with stiffeners 200mm width at top, middle and bottom at rear side of the shuter, vertical grooves (dumpling - machine pressed) of 25mm width and 15mm deep at a distance of 60mm to 75mm including supply of 3 nos of I.O. butt hinges (IS 1341 - 1992) of size 120mm long, 1 no of I.O aldrop of size 300mm × 12mm and 2 nos of I.O. tower bolt of size 200mm × 12mm including proper welding with MS angle frame and shutter alround in proper alignment, includiing welding the hinges to the door frames and door shutters and fitings such as aldrop, tower bolt etc., to be welded with door shutter with required base plates of width 110mm to 120mm and height 150mm to 160mm using same GI sheet, placing in shutter wherever required with propere welding etc., including one coat of primer with red oxide of good quality etc., complete in all respects as directed by the departmental officers. Door for overall size of 910mm × 2100 mm
1
-
-
... More
Fabrication and supply of GI sheet window of overall size of 1220 mm x 1220 mm using 24 Gauge ( 0.63 mm thick ) G.I.sheet ( I S 277 -1992 ) with MS angle of size 35mmx 35mm x 5mm ( I S 808 - 1989 ) for outer frame alround and "T" section ( I S 1173 - 1978 ) of size 25mm x 25mm x 3mm for central vertical post 2 nos, 4 nos of hold fasts of size 35mm x 35mm x 5mm , 150 mm long, suitably welded with outer frame and split at the ends, including providing 10mm MS Square rods ( I S 1732 - 1989 ), totally 11 nos placing at 100 mm centers, GI sheet window with 3 shutters, every shutter covered with alround frame using MS angle ( I S 808 - 1989 ) of size 25mm x 25mm x 3mm, shutters with vertical grooves (dumpling - machine pressed ) of 25mm width and 15 mm deep at a distance of 60 mm to 75mm , suitably welded to the MS angle frame and GI sheet shutter including fixing 6 Nos of I.O.Butt Hinges ( I S 1341 -1992 )of size 100mm, 3 nos of C.P. hook and eye, 150mm long, 3 nos of handle resting on the MS plate 75 mm x 40 mm x 2 mm thick suitably welded to the shutter/frame wherever required, grinding for smooth finish including one coat of primer with red oxide of good quality etc., complete in all respects as directed by the departmental officers. For window of overall size of 1220 mm x 1220 mm
1
-
-
... More
Supply and run off main with 2 wires of 4 sqmm copper PVC insulated unsheatherd single core Multi Strand Fire retardant 1.1 KV grade cable with ISI mark conforming to IS:694/1990 and with continous earth by means of 2.5 sqmm copper PVC insulated unsheatherd single core multi strand Fire Retardant 1.1 KV grade cable with ISI mark conforming to IS:694/1990 in fully concealed 19/20mm dia rigid PVC conduit pipe with ISI mark etc., including cost of all materials,specials etc., all complete and as directed by the departmental officers.
250
-
-
... More
Wiring with 2 of 1.5 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS 694 / 1990 with continuous earth connection by means of 1.5 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS 694 / 1990 in suitable PVC rigid pipe 1.8 mm thick with ISI mark on surface run with suitable size concealed 16 gauge M.S. switch box covered by laminated hylem sheet 3 mm thick for LIGHT POINTS including the cost of cable, PVC pipes and specials, brass screws, ceiling rose, flush type 5 Amps SP Mark switch, PVC junction box, 16 gauge M.S.switch box covered by laminated hylem sheet 3mm thick T.W.plugs, cement and labour, circuit mains etc., complete. box, covered by laminated hylem sheet 3mm thick T.W.plugs, cement and labour, circuit mains etc., complete. in all respects as directed by the departmental officers
12
-
-
... More
Wiring with 2 of 1.5 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI confirming to IS 694 / 1990 mark with continuous earth connection by means of 1.5 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS 694 / 1990 in suitable PVC rigid pipe 1.8 mm thick with ISI mark on surface run with suitable size concealed 16 gauge M.S. switch box covered by laminated hylem sheet 3 mm thick for FAN POINTS including the cost of cable, PVC pipes and specials, brass screws, ceiling rose, flush type 5 Amps SP Mark switch, PVC junction box, 16 gauge M.S.switch box covered by laminated hylem sheet 3mm thick T.W.plugs, cement and labour, circuit mains etc., complete. box, covered by laminated hylem sheet 3mm thick T.W.plugs, cement and labour, circuit mains etc., complete. in all respects as directed by the departmental officers
1
-
-
... More
Supplying and fixing of 5 A 3 pin and 2 pin combined flush type wall socket with 5 A flush type switch concealed in existing MS box in flush with wall and covered with 3mm thick hylem sheet including cost of wall socket, switch and labour charges,etc., complete as directed by the departmental officers.
4
-
-
... More
Supplying and fixing of CFL Bulb for suitable for fixing it to pendent/ bakelite battern holder of best approved variety and as directed by the departmental officers.(The materials should be got approved from the EE before use)
12
-
-
... More
Earthing as per ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less that 40mm and with 20mm dia copper earth flat of size 125mm x50mm x6mm, with funneling arrangement using charcoat, common salt, G.I reducer,. check nuts etc., and mansonry work and providing RCC cover slab 38mm thick for the Brick mansonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officer.
4
-
-
... More
Supply and run off 8 SWG copper wire on walls or below ground level with necessary "U" nails earth work excavation and refilling & including the cost of all materials etc complete in all respects as directed by the departmental officers.
48
-
-
... More
Supply and fixing water tight Bulk Head fitting (heavy type) with guard suitable for 100/60W bulb including the cost of bulb, necessary connection cost of materials etc.,complete. in all respects as directed by the departmental officers
4
-
-
... More
Supply and fixing of 1200 mm (48") AC Ceiling fan condensor with stepped electronic 300W regulator with in down on the existing clamp as directed by the departemental officers.
1
-
-
... More
Electro Mechanical - Equipments Coarse Screen SS BUCKET SCREEN of suitable to inlet sewer line Size with spacing 6 mm.(Coarse) Type: Bucket Screen
1
-
-
... More
BAR SCREEN SS BAR SCREEN of suitable to the tank of size 1000 x 500 mm Size with spacing 6 mm & 20 mm of 2 nos.(Coarse & Medium)
2
-
-
... More
SUTRO WEIR FOR GRIT CHAMBER Sutro weir arrangements suitable for the tank of size 2.75 x 0.6 x 1.0 m for the peak flow designed. MOC : SS
1
-
-
... More
RAW SEWAGE TRANSFER PUMPS FROM LIFTING WELL
Sewage feed pump to transfer sewage from receiving sump to screening tank of type Vertical, submersible pump set (3 working + 1 standby) capable of handling 50 mm solids with the following specifications, capacity of 25 cum/hour at Head 12 m of Kirloskar / Equivalent make with cast Iron casing and SS impeller and as per IS Specification including necessary valves and fittings & suitable level sensor arrangements to transfer the sewage to pre-treatment. Type : vertical, submersible Material of Construction : CI Capacity : 25.0 m3 / hour @ 12m head * Accessories : Base Plates, Canopy
Make : Kirloskar / Equivalent * - Head will be decided based on the invert level given by the client for raw sewage line
1
-
-
... More
PRE TREATED SEWAGE TRANSFER PUMPS
Sewage feed pump to transfer sewage from Equalization tank to SBR tank of type Vertical, submersible pump set (1 working +1 standby) capable of handling 50 mm solids with the following specifications, capacity of 62.5 cum/hour at Head 12 m of Kirloskar / Equivalent make with cast Iron casing and SS impeller and as per IS Specification including necessary valves and fittings.
Type : vertical, submersible Material of Construction : CI Capacity : 62.5 m3 / hour @ 12m head * Accessories : Base Plates, Canopy Make : Kirloskar / Equivalent * - Head will be decided based on the invert level given by the client for raw sewage line
1
-
-
... More
AIR BLOWER for Equalization Tank
Air Blowers in Equalization tank to supply air to equalization tank of type Twin lobe (1 working +1 Standby) with the following specifications, capacity of 200 Cu.m/hr., total pressure of 0.4 kg/sq.cm with suitable motor and all accessories. Air Blower Make : Ingerson roll / Equivalent Capacity : 200 cum / hr @ 0.5 kg/sq.cm Motor :7.5 Hp Make : Kirloskar / Equivalent
1
-
-
... More
Air Grid arrangements for Equalization tank
Air grid arrangements to equalization tank to deliver 200 Cum/hr air with following specifications, MOC UPVC and MS , total pressure 0.4 Kg/Sq.cm with standard specification & accessories
Make : Supreme /Finolex/Equivalent
1
-
-
... More
AIR BLOWER for SBR Tank
Air Blowers in 2 nos of SBR tank to supply air to SBR tank of type Twin lobe (2 working +2 Standby) with the following specifications inclusive of taxes, loading ,conveyance to site unloading etc., capacity of 540 Cu.m/hr, total pressure of 0.5 kg/sq.cm with suitable motor and all accessories.
Capacity : 540 cum / hr @ 0.5 kg/sq.cm Air Blower Make : Ingerson roll / Equivalent Motor : 20 Hp Make : Kirloskar / Equivalent
2
-
-
... More
Airline arrangements for SBR tank
Air grid arrangements to SBR tank to deliver 540 Cum/hr air with following specifications, MOC UPVC and MS, total pressure 0.5 Kg/Sq.cm with standard specification & accessories
Make : Supreme /Finolex/Equivalent
2
-
-
... More
DIFFUSERS FOR AERATION Diffusers for aeration tank to distribute 540 cum/hr of air to the SBR tank, with following specification Type : Tubular Fine pore, Fine Bubble Fixed Type, Diffusers Material: EPDM with accessories
Make : Scogen/ Tepro / equivalent
2
-
-
... More
SLUDGE RECIRCULATION PUMP Sludge pump to transfer sludge from SBR tank of type Horizontal, Centrifugal, Non Clog pump set (2 working +2 standby) capable of handling 50 mm solids with the following specifications, capacity of 6 cum/hour at Head 12 m of Kirloskar / Equivalent make with cast Iron casing and SS impeller and as per IS Specification including necessary valves and fittings. Type : Horizontal, Centrifugal, Non Clog Material of Construction : Cast Iron Capacity : 6 m3 / hour @ 12m head * Accessories : Base Plates, Canopy Make : Kirloskar / Equivalent 2 Working + 2 Stand By
2
-
-
... More
DECANTATION VALVES FOR SBR TANKS
Decantation Valves to transfer clarified water of 62.5 cum/hr from SBR tanks to Clarified water tank with automation arrangement with timer with following specifications, Auto solenoid valve of size 8 " 4 nos for 2nos each for the SBR tank.
4
-
-
... More
FILTER FEED PUMP
Filter feed pumps to transfer clarified water from SBR tanks to filters with following specifications, Mono block Centrifugal pump of capacity 25 cum/hr with 30 m head PUMP - Kirloskar / Equivalent 1 Working + 1 stand By
1
-
-
... More
PRESSURE SAND FILTER Pressure Sand filter of capacity 25 cum/hr to filter the suspended solids in the sewage with following specifications, Vertical, Cylindrical with design pressure 5.0 kg/cm2 with working pressure 3.0 kg/cm2 with service flow rate 25 Cum /hr , with MOC MSEP with frontal pipe line arrangements and MPV, Media - Graded Pebbles, Silex, Graded filtering Sand with accessories.
1
-
-
... More
ACTIVATED CARBON FILTER
Activated carbon filter of capacity 25 cum/hr to remove odour in the sewage with following specifications, Vertical, Cylindrical with design pressure 5.0 kg/cm2 with working pressure 3.0 kg/cm2 with service flow rate 25 Cum /hr , with MOC MSEP with frontal pipe line arrangements and MPV, Media - Graded Pebbles, Silex, Graded filtering Sand and Activated carbon with accessories.
1
-
-
... More
UV System
UV system of capacity 25 cum/hr to disinfect the treated sewage with following specifications ,Size : 350mm Dia X1500 mm, Inlet & outlet Connection : 3” Flanged End Table –E,No. Of Lamp : 5 Nos (320Watts each),Max. Operating pressure: 3 Bar, MOC of housing : SS 304 with necessary accessories & fittings.
Lamp make : HITECH / LIGHT SOURCE / ALPHA / Equal
1
-
-
... More
ELECTROMAGNETIC FLOW METER & ULTRASONIC FLOW METER – FOR INLET & OUTLET
Size : 60 NB
Type : Electro Magnetic Make : FREHNIG / EQUAL
2
-
-
... More
SCREW PUMP 2 Nos.single screw double stage pumps flanged ends with CI body alloy steel rotating parts etc., complete (one working + one standby) to pump sludge from sludge holding tank to filter press at 5.0 cum / Hr flow rate. Flow rate - 5.0 m3 / Hr Head - 30 m
1
-
-
... More
SLUDGE DEWATERING SYSTEM (FILTER PRESS)
Plate and Frame type Mechanical sludge de-watering system consisting of: Plate size - 610 x 610
No of plates – 16 nos
Operating pressure - 8 Kg/Cm2
Make – BKS/ Equal
1
-
-
... More
SUPPLY OF INTER CONNECTING PIPING WORKS Supply of Piping works including Suction and Delivery of Transfer Pumps and Dosing pumps, with necessary supports, excavation, backfilling, alignment, with following specifications
Pipes & Fittings
Material : UPVC / MS Pressure rating : UPVC - 6 kg/cm2, MS - 15kg/cm2
Make : UPVC - SUPREME/ FINOLEX /EQUAL MS/GI - Tata, Jindal/ Equivalent Valves Diaphragm Valves, Gate Valves, Ball Valves, Non Return Valves
Butterfly Valves, Needle Valves
Material : Polypropylene, CI, Carbon Steel Stainless Steel
Standard : BS 5351
Working pressure : 10 kg/cm2 Make : Intervolve, Hawa / Equivalent Interconnecting pipe line for STP
1
-
-
... More
SUPPLY OF INTER CONNECTING ELECTRICAL WORKS WITH PANEL
Supply of Electrical works with following specifications
Motor Control Centre
Type: Fixed cubical type with DOL Starters Consists of Incoming feeder with outgoing feeders, Voltmeter Ammeter, Push buttons with Indicator lamp, Overload relays, Contactors, Bus bar of required size, Control cabling Cables, Type : Copper armored : Make : Omega / Equivalent
Terminations : Consists of compression cable glands, ferrules, ties,
Panel for STP - Non compartment type.
1
-
-
... More
Added GST of 18% (All Items)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%