Tamil Nadu Housing Board Tender
... More
The TNHB has issued a formal invitation for competitive bids for the Tamil Nadu Housing Board project, for Construction Of 64 Tenements G With 3 Floors At Powerkuppam, Scheme In R.s.no.3521 Pt, 3527/1 And2 Pt, 3528/1 And5 Pt, Block No.52, Tondiarpet Village And Taluk, Chennai in Chennai, Tamil Nadu, with an estimated contract value of Rs. 5,74,42,674. The bid opening date for this tender is 18-04-2025 and the last date for bid submission is 02-05-2025. Interested bidders for Tamil Nadu Housing Board tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Tamil Nadu Housing Board - TNHB Tender
Civil And Construction
Building Construction
Real Estate Service
Eprocure
Opening Date18 Apr 2025
Closing Date2 May 2025
Tender Amount₹ 5,74,42,674
Technical
Technical
Additional Eligibility
Technical Capacity
... View More
The required prior work experience for the bidder varies depending on the type of work and the value of the tender. For road work, the experience should be in formation of roads and allied development works. For water supply mains and distribution system, the experience should be in similar types of work. For levelling and filling work, the experience should be in similar levelling and filling work. For over Head Tank, the experience should be in similar type of over Head Tank work. For tenders valued between Rs.10 lakhs to Rs.25 lakhs, the bidder should have one B.E. (Civil) or equivalent degree holder with three years experience in Civil Engineering works or not less than one retired sub divisional officer plus one diploma holder in Civil Engineer. For tenders valued between Rs.25 lakhs to Rs.50 lakhs, the bidder should have one B.E. (Civil) or equivalent degree holder with three years experience or not less than one retired sub-divisional officer (Retired Assistant Executive Engineer plus two Diploma holder in Civil or two retired Junior Engineers). For tenders valued above Rs.50 lakhs, the experience requirement will be examined on an individual basis depending on the nature of work and technical skill involved. The bidder should have executed work of similar nature under a single contract, which should have been completed. The value of the similar work completed should be not less than 100% of the value of the work put to tender in a single contract in Government Department works. In one instance, the value of the work is Rs. 574.42 Lakhs (Approximate), so the bidder should have completed a similar work with a value of at least Rs. 574.42 Lakhs. The percentage of similar works completed is 100%. The bidder should also provide details of works completed, including the value of work, and timely completion. The percentage of physical completion of works in progress should be mentioned. In another instance, preference in the selections from among the tenders will be given to those who are themselves professionally qualified or who undertake to employ qualified men at their cost to look after the work. The tenderers should state in clear terms whether they are professionally qualified or whether they undertake to employ technical staff and if so, to give their professional qualifications or of the staff to be employed. However, specific details on the required prior work experience are not mentioned in this case.
Costs
EMD
₹ 2,98,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_TNHB_547805_1Bid Award Id
ViewTender No
CC1_TNHB_01(2)_2025-26Tender Authority
Tamil Nadu Housing Board ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of 64 tenements G WITH3 Floors at powerkuppam, Scheme in R.S.No.3521 pt, 3527 -1 2 pt, 3528-1 AND5 pt, Block No.52, Tondiarpet village AND taluk, Chennai
BOQ Items
... More
2 to 3m depth
443
-
-
... More
3 to 4m depth
45
-
-
... More
Refilling in foundation and basement and other similar works with excavated earth in layers of 150mm thickness well watered rammed and consolidated etc all complete complying with relevant standard specifications and as directed by the Departmental officers.
1329
-
-
... More
Supplying and filling in foundation and basement with filling M sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling msand as directed by the Departmental officers.
66
-
-
... More
Supplying and filling in foundation and basement with stone dust in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand and as directed by the Departmental officers.
438
-
-
... More
Cement concrete 1:4:8 ( One of cement, four of M sand and eight of hard broken stone jelly) for foundation using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.
78
-
-
... More
Cement concrete 1:2:4 (One of cement, two of sand and four of hard broken stone jelly) for foundation and flooring using 20 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.
33
-
-
... More
Flyash Brick Work in cement mortor 1:5 ( One of cement and five of Msand) using Fly ash bricks of size 230 x 110 x 70 mm having minimum average crushing strength of 50Kg/sqcm in foundation & basement including dewatering wherever necessary proper setting curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. Foundation and basement
83
-
-
... More
A.A.C Block Work in cement mortor 1:6 (One of cement and four of sand) using AAC Block of size 600x 200 x 200 mm having minimum average crushing strength of 50Kg/sqcm for super structure in the following floors including labour for fixing the doors ,windows and ventilator frames in position fixing of hold fast ,scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings and as directed by the departmental officers.
-
-
-
... More
In Ground floor
89
-
-
... More
In First floor
89
-
-
... More
In Second floor
89
-
-
... More
In Third floor
166
-
-
... More
A.A.C Block Work in cement mortor 1:4 (One of cement and four of sand) using AAC Block of size 600x 200 x 100 mm having minimum average crushing strength of 50Kg/sqcm for super structure in the following floors including labour for fixing the doors ,windows and ventilator frames in position fixing of hold fast ,scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings and as directed by the departmental officers.
-
-
-
... More
In Ground floor
200
-
-
... More
In First floor
200
-
-
... More
In Second floor
200
-
-
... More
In Third floor
200
-
-
... More
Brick partition wall 70mm thickin CM 1:4 using class III ground moulded bricks of size 22x11x7cm for superstructure In Following Floors using bricks having minimum average crushing strength of 50Kg/sqcm. including curing etc. complete in all respects complying with relevant standard specifications and drawings and as directed by the departmental officers.
-
-
-
... More
In Ground floor
22
-
-
... More
In First floor
22
-
-
... More
In Second floor
22
-
-
... More
In Third floor
22
-
-
... More
Providing 70mm thick stair case parapet wall using using Fly ash bricks of minimum size 230x110x70mmin cement mortar 1:4 and plastering both sides with cement mortar 1:4, 20mm thick and the hand rail portion only with red oxide plastering with cement mortar 1:4, 20mm thick providing skirting finishing smooth etc., all complete in all respects as directed by the departmental officers.
-
-
-
... More
In Ground floor
40
-
-
... More
In First floor
40
-
-
... More
In Second floor
40
-
-
... More
In Third floor
40
-
-
... More
Cement Concrete M30 Design Mix min Cement Content 400Kg/Cum for all reinforced cement concrete works namely Pile cap,Grade beam, Column and other similar works and other similar structures etc.with water cement ratio not exceeding 0.45 and minimum cement content of 380 Kg per Cubic Metre,.using ordinary Portland cement, river sand, 20mm and down size coarse aggregates, necessary approved admixtures as per requirement and using fly ash content not exceeding the 15 % in structural and non structural works excluding the cost of reinforcement grills, fabrication charges, shuttering and centering but including all leads and lifts, pumping using line pump or boom placer, scaffolding wherever necessary,laying,vibrating, finishing, curing etc all complete in all respects complying with relevant standard specification and as directed by the departmental officers.
-
-
-
... More
In foundation and basement
291
-
-
... More
In Ground floor
125
-
-
... More
In First floor
125
-
-
... More
In Second floor
125
-
-
... More
In Third floor
125
-
-
... More
In Forth Floor
36
-
-
... More
Supply and erecting, centering for sides and sofits including supports and strutting up to 3.29 mt high for plane surfaces such as RCC slabs, rectangular beams, Tee (or) Ell beams, lintels, Bed Blocks, slabs, landing beam, canopy side slab or boxing or vertical slabs, rectangular or square or round columns etc. as detailed below with all cross bracings using MS sheets of size 90cm x 60cm and BG 10 stiffened with welded MS angles of size 25mm x 25mm x 3mm for boarding laid over silver oak or country wood joist of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13cm dia spaced about 75cm center to centre or at nsuitable intervals etc. complete complying with standard apecification and as directed by the Departmental officers.
-
-
-
... More
Providing form work for foundation, Plinth beam etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.
972
-
-
... More
Providing Form work for R.C.C. plain surfaces such as Floor slabs, roof slabs, lintels beams etc complete in all respect complying with relevant standard specifications and as directed by the departmental officers.
3358
-
-
... More
Providing Form work for soffits of reinforced cement concrete works for small quantities complete in all respect complying with relevant standard specifications and as directed by the departmental officers.
1419
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on worketc.. all, complete as per relevant standard specification and as directed by the departmental officers.
104
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.
48
-
-
... More
Supplying of Door Frame of overall size 0.90 mX2.10m with required dimensions of size ~100mmX75mm, with groove of size - 30mmX20mm for resting the door shutter & chamfer finish at front using CRCA pressed steel box section 18 gauge or 1.25mm thick for door frames including providing holes and fixing wooden blocks for fixing fixtures and fittings and 4 nos of hold fast using the iron angle of 15cm length with split endsone coat of redoxide primer, Fabrication and supply of 35mm thick solid core flush door with teakply on one side and commericial ply on other side with teak wood liping alround with iron oxidised hinges, tower bolts 12"2 nos with receiver, Aldrop 30cm and handle 1 no for door of Following size (Neruperichal HFA) Main door
64
-
-
... More
Supplying and fixing of solid pvc door shutter using 19gauge 19mmM.S square tube for styles outer frames15mm for M.S square tubes for toplock top and bottom rails. the steel tubes shall be covered with 5 mm thick solid pvc sheets shutter for panelling shall rigidity fixed in positition including necessary furniture fittings.THe over all size of styles shall be 50mmX30mm. The over all styles of top rails bottom rails shall be 75mmX 30mm. The over all size of framesshall be 50mmx 45mm with suitable rebate shutters.size 750X 1980mm
193
-
-
... More
Supply &fixing Mild steel grill of approved. The cost including of necessary screws, plugs, one coat of red oxide primier of approved quality, laboir charges for fixing etc.. all, complete as per relevant standard specification and as directed by the departmental officers.
2898
-
-
... More
Supplying and fixing in position of colour glazed wall tiles of any size 6mm thickness laid in cement mortar 1:2( One of cement and two of msand) 10mm thick for wall facing / dadoing ,skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour make and quality shall be approved from the E.E before use ) Note: ( only one particulars size of ceramic wall tiles to be used for one building)
970
-
-
... More
Supplying and fixing in position of Strain free nano polish Virtified Floor tiles of 600 x 600 x 8 mm of approved special quality of 6mm thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour and quality shall be approved from the E.E before use only one particular size of ceramic wall tiles to be used for one building)
1114
-
-
... More
Supplying and fixing in position of colour Antiskid floor tiles of any size of approved special quality of 6mm thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour and quality shall be approved from the E.E before use only one particular size of ceramic wall tiles to be used for one building)
167
-
-
... More
Providing cuddappa slabs of 40mm thickness for kitchen herth slab of well polished on both sides smoothly including fixing with CM 1:3 (one of cement three of sand)12mm thick including cutting to the required size laying fixing in position and jointing with black oxide and finishing neatly etc. as directed by the dept. officers.
48
-
-
... More
Supplying and fixing of Cuddappa Cup Board planks of various sizes both side polished using 20 / 30mm thick cuddappa planks including fixing in position, finishing, curing etc., complete in all respects.
72
-
-
... More
Supplying and fixing the Soap case corner slab of size 10" radius for bathroom portion as directed by the departmental officers.
64
-
-
... More
Supplying and fixing the Cuddapah slab sink of size 600mm x 450mmx200mm with 32mm dia B class G.I waste water pipe & 32mm dia C.P. waste coupling etc complete.
64
-
-
... More
Finishing the top of flooring with cement concrete 1:3 Ellis pattern flooring 20mm thick in cement concrete 1:3( One of cement and Three of stone jelly ) using 10mm and less hard broken stone chips (No msand to be used) including laying ,curing, finishing..etc complete complying with relevant standard specifications and as directed by departmental officers.
307
-
-
... More
Weathering course with broken brick jelly lime concrete using 20mm gauge broken brick jelly in pure slaked lime ( no msand) over roof slab to the proportion of brick jelly to lime ( Fat lime) being 32: 12 1/2 by volume well beaten with wooden beaters, for giving the required slope and thickness complying with relevant standard specification and as directed by the departmental officers
34
-
-
... More
Finishing the top of terrace floor with one course of solar reflective water proof, heat proof, cool proof tiles of size 300mm x 300mm x 8mm of approved quality laid in cement mortar 1:3 (One part of cement and three part of M msand) mixed with chemical mineral powder (60 kg for 1000 Sqft) (before laying tiles, the tiles should be dipped with salin based nano liquid) and top pointing with cement mortar 1:3 (One part of cement and three part of M msand) mixed with white cement, silicon powder and polymer additives (20Kg of 1000 Sqft) and joint pointed with a base concrete of PCC 1:2:4 using 6 to 10 mm metal for providing necessary gradient at top of roof etc., complete complying with standard specifications including cost of all materials, labour charges for lifting to open terrace, laying and finishing and other incidental charges etc., complete and as directed by the departmental officers. (The Brand and quality of tiles should be got approved from the Executive Engineer before using)
413
-
-
... More
Plastering in C.M 1:3 (one of cement and three of msand)10mm thick for bottom of sunshade, ceiling in all floors, including scaffolding, curing ,finishing etc complete in all respects .
1526
-
-
... More
Plastering with cement mortar 1:5 ( One of cement and five of msand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer.
7988
-
-
... More
Plastering with cement mortar CM 1:4, 12mm thick mixed with water proofing compound @ 2 kg per 10 Sq including finishing smooth, proper setting, curing etc., Complete in all respects as directed by the departmental officers.
356
-
-
... More
Painting the new walls two coats with best approved quality weather shield exterior emulsion paint over one coat of primer including cost of brushes, emulsion paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use).
3098
-
-
... More
Painting the new walls with two coats of approved Interior Plastic emulsion paint over one coat of primer including cost of brushes, cement paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The quality and shade of paint should be got approved by the Executive Engineer before use)
4602.68
-
-
... More
White washing two coats of clean shell lime including cost of lime, gum, brushes, scaffolding etc., complete in all respects as directed by the departmental officers.
1526
-
-
... More
Painting New Iron work two coats with best approved Ist class synthetic ready mixed enamel paint of approved quality etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use).
145
-
-
... More
Painting the flush door shutter of doors and with one coat of first class enamel paint of approved quality and colour over one coat of primer including the cost of paint brushes and scaffolding etc., complete as directed by the departmental officers
277
-
-
... More
Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels for reinforcement Fe500 HYSD for all floors including cost of steel, binding wire, bending, tying etc, all complete complying with relevant standard specification and as directed by the departmental officers.
116
-
-
... More
Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls. The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide “Chloripyrifos” and spraying the same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II) / 1981 and as directed by the departmental officers.
423
-
-
... More
Supply and fixing of Fabricated steel structural supports of ISA 40x40x6mm of weight 3.5 kg/m for water supply and waste pipes including msand blasting, with Two coats of enamel paint over one coat of primer etc. all complete complying with relevant standard specification and as directed by the Departmental officers.
128
-
-
... More
Water supply , sanitory and Rainwater Arrangement
-
-
-
... More
Supplying and fixing of 110mm dia PVC SWR pipe A Type for Rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offset ,clamp, teak wood plug, GI Bolts and Nuts, etc., of approved quality and including fixing C.I. gratings at the junction of parapet and floor or roof slab , including finishing etc., complete complying with relevant standard specifications. and as directed by the departmental officers.
217
-
-
... More
Supplying, laying, fixing and jointing the following PVC pipes as perUPVC of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/GI specials /GM specials like Elbow, Tee reducers, Plug , union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., fixing on wall to the proper gradiant and alignment and redoing the chipped of masonry etc., as directed by the departmental officers. (above G.L)
-
-
-
... More
25 mm UPVC Pipes
588.48
-
-
... More
20 mm UPVC Pipes
547
-
-
... More
Supplying and fixing of GM Gate valve following Dia labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved fromthe Competent Authority before use) 25mm dia Gate Valve (Heavy)
64
-
-
... More
Supplying and fixing of C.P sink cock with U shape bend pipe spout wall flange like Jaguar including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from the Competent Authorityr before use).
64
-
-
... More
Supplying and fixing of C.P Short body Bip cock with wall flange with Jaguar fittings including cost of fittings , labour for fixing etc, complete complying with relevant standard specifications and as directed by the departmental officers. (The quality of fittings should be got approved fromthe Competent Authority before use)
64
-
-
... More
Supplying and fixing of C.P Long body Bip cock with wall flange with Jaguar fittings including cost of fittings , labour for fixing etc, complete complying with relevant standard specifications and as directed by the departmental officers. (The quality of fittings should be got approved from the Competent Authority before use)
64
-
-
... More
Supplying and fixing of C.P Concealed stop Cock with sliding flange of Jaguar Fittings including cost of fittings , labour for fixing etc, complete complying with relevant standard specifications and as directed by the departmental officers. (The quality of fittings should be got approved from the Competent Authorityr before use).
192
-
-
... More
Supplying and fixing of Oriya Type Indian Water Closet 580x440mm of approved make (to be got approved from EE before use) with P or S trap, including concrete filling the sunk portion with brick jelly lime concrete proportion of brick jelly to lime being 32:121/2 by volume (32 cft of 20mm gauge brick jelly and 12 1/2 cft of slaked lime) (No sand) and top 75mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of sand and sixteen of broken brick jelly) using 40mm size brick jelly including plastering the sides of sunk portion in Cm 1:3 (one of cement and three of sand) 12mm thick mixed with water proofing compound at 2Kg / m2 andtop left rough to receive the floor plastering but including antisyphonage connection including one coat of bitumen for the sides bottom and curing etc., complete complying with relevant standard specification and as directed by the departmental officer.
-
-
-
... More
Ground Floor
16
-
-
... More
Other than Ground Floor
48
-
-
... More
Supplying and fixing the following dia PVC (SWR) pipe type B class conforming to IS 13592and relevant specials including packing the joints with rubber lubricant fixing them into walls with necessary GI Bolts and Nuts with special clamp made of MS angle/Flat including cutting, bending (excluding the cost of MS angle/flat) holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete complying with relevant standard specification and as directed by the departmental officer
-
-
-
... More
110mm dia PVC SWR pipe including all required PVC specials etc., all complete and as directed by the departmental officers.
270
-
-
... More
75mm dia PVC SWR pipe including all required PVC specials etc., all complete and as directed by the departmental officers.
537
-
-
... More
Supply and fixing of PVC Nahani Trap with PVC Grating of Size 75mm x 50mm (Superior Variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amedments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of sand and ten of 40 mm gauge brick jelly) etc., complete complying with relevant standard specification and as directed by the departmental officer. (The PVC Nahani Trap should be got approved from the competent authority before use)
192
-
-
... More
Supplying and fixing the following dia UN PLASTICIZED NON - PRESSURE POLYVINYL CHLORIDE (PVC- U) Pipes for use in underground drainage and sewerage systems as per is 15328/2003 socket ends in dry conditions and tested with water including necessary earth work exacavation for trenches and refilling the same well rammed and consolidated after the pipes are joined with PVC solution and tarred yarn laid to proper gradient to the alignment etc., complete complying with relevant standard specification and as directed by the departmental officer. ( SW pipes should be got approved by the Competent Authority before laying)
-
-
-
... More
110mm dia Pvc pipe
164.26
-
-
... More
150mm dia Pvc pipe
71.76
-
-
... More
Supplyig and fixing of HDPE cylinderical tank 750 litres capacity etc., all complete complying with relevant standard specification and as directed by the departmental officers.
64
-
-
... More
Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of msand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 115 mm thick using Second class chamber burnt ground mould bricks of size 9”x4-3/8”x2-3/4” (23x11.2x7cm) in cm 1:5 (One of cement and five of msand ) plastered with CM 1:3 (One of cement and three of msand) 12mm thick etc., complete complying with relevant standard specification and as directed by the departmental officers.
16
-
-
... More
Construction of Inspection chamber with brick jelly concrete 1:8:16 ( one of cement eight of sand and sixteen of hard broken jelly ) using 40mm gauge broken brickjelly 15cm thick for foundation and 23cm thick brick masonry in C.M. 1:5 ( One of cement and five of sand) using II nd class ground moulded Chamber burnt bricks of size 9”x4-3/8”x2-3/4” plastering with cement mortar 1:3 ( One of cement and three of sand) 12mm thick on both sides top and bottom including earth work excavation, supply and fixing of SFRC cover slab of size 60cmX60cm including benching charnelling fixing cover slab in position curing finishing etc., complete in all respects.complying with relevant standard specification and as directed by the departmental officers.
-
-
-
... More
Inspection Chamber of Size 60x60x45 cm
10
-
-
... More
Inspection Chamber of Size 60x60x60 cm
4
-
-
... More
Inspection Chamber of Size 60x60x75 cm
2
-
-
... More
Inspection Chamber of Size 60x60x90 cm
2
-
-
... More
Inspection Chamber of Size 90x90x120 cm
4
-
-
... More
Electrical Arrangements Wiring with 2 x 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990and with continuous earth by means of 1.5 sqmm copper insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed PVC rigid conduit pipe heavy duty with ISI with suitable size MS box of 16 gauge thick concealed for light point with ceiling rose controlled by 6 amps flush type modular switch with "Light" marking including circuit mains cost of all materials, specials etc., all complete complying with relevant standard specifications and as directed by the departmental officers
-
-
-
... More
Light point with ceiling Rose
144
-
-
... More
Light point with Backlite Battern Holder
128
-
-
... More
Wiring with 2 x 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990and with continuous earth by means of 1.5 sqmm copper insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed PVC rigid conduit pipe heavy duty with ISI with suitable size MS box of 16 gauge thick concealed and for Fan Point controlled by 6 amps flush type modular switch with "Fan" marking including circuit mains cost of all materials, specials etc., all complete complying with relevant standard specifications and as directed by the departmental officers.
a) Ceiling Fan Point / Exhaust Fan point
64
-
-
... More
Supply and fixing of concealed type fiber box with MS fan hook of 100mm dia ,75mm depth and 3mm thick etc., all complete complying with relevant standard specifications & as directed by the departmental officers..
64
-
-
... More
Wiring with 2 x 1.5 sqmm copper P.V.C. insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990and with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS Box of 16g thick concealed for Staircase Light Point controlled by 6 amps flush type modular two way switch with "Light" marking including circuit mains, cost of all materials, specials, etc., complete complying with relevant standard specification and as directed by the departmental officer.
7
-
-
... More
Wiring with 2 x 1.5 sqmm copper P.V.C. insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 and with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 gauge thick concealed and covered with 3mm thick laminated hylem sheet for 6 amps 5 pin plug socket point at Switch Board Itself including circuit mains, cost of all materials, specials, etc., all complete complying with relevant standard specifications & as directed by the departmental officers
128
-
-
... More
Wiring with 2 x 1.5 sqmm copper P.V.C. insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 and with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 gauge thick concealed and covered with 3mm thick laminated hylem sheet for 6 amps 5 pin plug socket point at convenient place including circuit mains, cost of all materials, specials, etc., all complete complying with relevant standard specifications & as directed by the departmental officers..
64
-
-
... More
Supplying and fixing 15amps 3 pin plug flush type socket on a suitable MS box 16g thick concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials all complete, complying with relevant standard specifications & as directed by the departmental officers
64
-
-
... More
Supplying and fixing 15amps switch on a suitable MS box 16g thick concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials all complete, complying with relevant standard specifications & as directed by the departmental officers
64
-
-
... More
Supplying and fixing 15amps 3 pin plug type socket and switch on a suitable MS box 16g thick concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials all complete, complying with relevant standard specifications & as directed by the departmental officers.
64
-
-
... More
Supplying and fixing of SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 4 way vertical SPMCB metal sheet door cover with IP42 protection distribution boards flush type / surface type fitted with bus bars and neutral links with single phase MCB outgoings and separate 2 way provision for accommodating One No. 2 pole incoming MCB / Isolator and another separate 2 way provision for accommodating One No. 2 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm includind labour charges etc., complete in all resspcets as directed by the departemental officers. (4 ways single phase DB
No. of ways incomer MCB / Isolator - 2
No. of ways incomer ELCB / RCD - 2
No. of outgoings ways - 2)
68
-
-
... More
Run of main with 2 wires of 2.5 Sqmm Copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 and with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed 19/20mm dia rigid PVC conduit pipe with ISI mark etc. including cost of all materials, specials etc. all complete and as directed by the departmental officers.
2526.44
-
-
... More
Run of main with 2 wires of 4 Sqmm Copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 and with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed 19/20mm dia rigid PVC conduit pipe with ISI mark etc. including cost of all materials, specials etc. all complete and as directed by the departmental officers.
1597.44
-
-
... More
Run of main with 4 wires of 6 Sqmm Copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 and with continuous earth by means of 2.5 sqmm copper PVC insulated unsheathed single core Multi Strand Flame Retardant Low Smoke 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed 32mm dia rigid PVC conduit pipe with ISI mark etc., including cost of all materials, specials etc. all complete and as directed by the departmental officers.
1181.12
-
-
... More
Supplying and laying of 8 SWG , Copper wire on walls/below G.L. with necessary "U" nails earth work excavation and refilling etc., including cost of all materials etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.
60
-
-
... More
Providing earthing station using pipe electrode as per IS 3043 using 40mm dia B Glass G.I pipe 2.5 meters. 20mm dia B class G.I. pipe 1 metre 40 x 20mm G.I. Reducer 1 no.1 set of funel G.I. nuts, bolts, washers and checknuts, 1 no.of SFRC heavy duty cover (60 x 60cm ) 40Kg charcoal, 2nos.of C.I.bend 15mm dia 4 Nos.of 15mm dia G.I. coupling and 10Kg salt including necessary earth work excavation (i.e. by augering 30cm dia to a depth of 3.5 metres.and laying the salt and charcoal in layer by layer around G.I.pipe brick work in Cement mortar and plastering etc . Including cost of all materials and labour in accordance with IS 3043. etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.
8
-
-
... More
Supplying and fixing of Single type Street light LED Fitting 20 mm dia GI pipe 'B' class with clamps, bolts etc.,complete with ISI mark, complying with relevant standard specifications & as directed by the departmental officers.
26
-
-
... More
Supplying and laying of 25x3mm GI Strip on walls/below G.L. with necessary "U" nails earth work excavation and refilling etc., including cost of all materials etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.
40
-
-
... More
RAINWATER HARVESTING
-
-
-
... More
Providing Rain water Harvesting pit by earth work of 90cm dia and 60 cm depth and filling with stone jelly 40mm size including earth work excavation filling work with the stone jelly and covering with precast RCC 1:2:4 slabs, precast well ring RCC 1:2:4 including cost of steel and fabrication of reinforcement and grills precasting moulding, curing finishing and placed in position and augaring 300mm dia bore pit to a depth of 4.40m and filling the entire depth of bore pit using river M sand15% 20mm H.B Stone jelly 50% and 40mm H.B Stone jelly 35% including Supplying & fixing 1No. Gully trap with 110 mm dia PVC pipe for jointing including the cost of materials and labour charges etc.. complete in all respect as directed by departmental officers.
16
-
-
... More
AVENUE TREES
-
-
-
... More
Supply and planting of avenue trees including earth work excavation for pit of size 60x60x60cm filled with manure for 20cm depth and filling with river sand and red earth mix in the ratio of 1:1 for 40cm depth in the same pit and planting the avenue trees of approved varities to a height of 200cm from the ground level and maintaining them for the period of 6 month including watering, periodical manuring and replacing the avenue trees if dead etc., all complete and as directed by the departmental officers. (Tree sappling shall be got approved from competent authority before planting)
5
-
-
... More
Supplying and fixing of Square shape chicken mesh TREE GUARD using 8cm dia casurina vertical post and middle tie using country wood reeper of size 50x25mm and 25 gauge chicken mesh including labour charges for fixing the Square tree guard and as directed by the departmental officers
5
-
-
... More
NUMBERING
-
-
-
... More
Supply and Fixing of Signage /Numbering Plate with 304 grade 18 SWG thickness stainless steel etching name board of size 10" for Flat which can be mounted in wall with Polished Surface Finish etc complete complying with standard specification and as directed by the departmental officers
64
-
-
... More
PAVER BLOCK
-
-
-
... More
Supplying and laying of concrete interlocking blocks of 63 mm thickness using rubber mould, approved make with grey colour including cost of conveyance of interlocking blocks and filling sand and spreading of sand to a thickness of 15 cm for cussion below the interlocking blocks and consolidating, vibrating labour charges for laying to proper level slope etc. as directed by the dept. officers (Design and colour of interlocking blocks should be got approved by EE before using)
197.28
-
-
... More
SUB TOTAL
-
-
-
... More
GST 18%
1
1
1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements