State Industries Promotion Corporation Of Tamil Nadu Limited Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
State Industries Promotion Corporation Of Tamil Nadu Limited - SIPCOT Tender
Civil And Construction
Civil Works Others
Excavation
Eprocure
Opening Date26 Feb 2025
Closing Date12 Mar 2025
Tender Amount₹ 2,27,68,000
Technical
Technical
Financial
Class Of Bidder
... View More
Class-III and above state level Civil Contractors.
Technical Capacity
... View More
The required prior work experience for the bidder includes: * Project Engineer with at least 5 years of experience
* Site Engineers with at least 3 years of experience, including: + 1 B.E. (Civil) with 3 years of experience + 1 Diploma Holder in Civil Engineering with 3 years of experience + 1 Diploma Holder in Electrical Engineering with 3 years of experience The bidder should have completed similar works in the preceding five years, with a value exceeding Rs. 113.84 Lakhs under a single agreement. The bidder should have satisfactorily completed one similar work with a value not less than 50% of the value of this work, which is Rs.113.84 Lakhs, in the preceding 5 years. The bidder should also have completed civil works with a value above Rs.2.00 Crore and up to Rs.5.00 Crore. A minimum of 60% completion rate for the second month and 100% completion rate up to the third month is required. The bidder should have completed 100% of the works within the stipulated time frame to avoid liquidated damages. If the bidder fails to complete the works within the due date, a fine not exceeding 5% of the balance value of the contract will be imposed.
Costs
EMD
₹ 1,24,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_SIPCT_528038_1Tender No
NIT.No. 41/CD/T.No.41/2024-25Tender Authority
State Industries Promotion Corporation Of Tamil Nadu Limited ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the SIPCOT Officers and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
0-2m depth
4316
-
-
... More
2-3m depth
23
-
-
... More
Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.Including cost of chemicals labour charges,transport and storing etc complete complying with standard specification and as directed by SIPCOT officers.
132
-
-
... More
Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by SIPCOT officers.
85.5
-
-
... More
Supplying filling in foundation,basement etc with filling suitable embankment filler materilas in layers of not more than 15cm thick well watered,rammed and consolidated etc., ccomplete complying with standard specification and as directed by SIPCOT officers.
28
-
-
... More
Providing and laying Plain Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by SIPCOT officers.
22
-
-
... More
Providing and laying Plain Cement Concrete 1:2:4 using 20mm HBG Stone Jelly for levelling course under footings, steps, walls, platform etc. including form work wherever necessary and well compacted etc. all complete complying with standard specification and as directed by SIPCOT officers. (for foundation and basement)
43.2
-
-
... More
Providing and laying Plain Ccement Concrete 1:4:8 using coarse graded aggregate of 40 mm and down size for levelling course under footings, steps, walls, platform etc. including form work wherever necessary and well compacted etc. all complete complying with standard specification and as directed by SIPCOT officers.
68.5
-
-
... More
Providing and laying Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone jelly) using 10-12mm size hard broken stone jelly for finishing ,etc., complete complying with standard specification and as directed by SIPCOT officers.
86
-
-
... More
Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the SIPCOT Officers at 2% by weight of cement used and finishing, curing etc. etc., complete complying with standard specification and as directed by SIPCOT officers.
24
-
-
... More
Cement Concrete M 25 1:1:2 (One Cement, One sand and Two hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
a) Upto basement
33.1
-
-
... More
b) Ground floor
41
-
-
... More
Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by SIPCOT officers. (Foundation and Plinth)
-
-
-
... More
a) Foundation and Basement
30
-
-
... More
b) In Ground floor
6.5
-
-
... More
Brick work in Cement Mortar 1:5 using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
a) In between column Up to plinth level
136
-
-
... More
b) In ground floor
54
-
-
... More
Brick partition walls of 11.50cm thickness using best quality II Class Table Moulded Chamber Burnt Bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc.,complete complying with standard specification and as directed by SIPCOT officers. (Hoop iron reinforcement will be measured and paid for separately)
82
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc., complete complying with standard specification and as directed by the SIPCOT Officers. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
a) Column Footing, Column pedasstal, plinth beam, grade beam etc., below plinth surface
245
-
-
... More
b)For Plane Surfaces Such as RCC Floor Slab,Roof slab,Beams,Lintels,Bed Blocks,Landing Slab,Waist Slab,Portico Slabs-Ground floor
275
-
-
... More
c)For Plane Surfaces Such as Rectangular or Square RCC Columns,Sunshades,Top and Bottom slab of RCC Boxing etc
139
-
-
... More
d)Vertical below plinth
107
-
-
... More
Supplying fabricating and placing in position steel reinforcement using mild steel or ribbed star rods for all RCC works as per the design given including cost of steel and binding wire also in all floors steel and binding wire shall be supplied by the contractors etc., complete complying with standard specification and as directed by the SIPCOT Officers.
19150
-
-
... More
Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., complete complying with standard specification and as directed by the SIPCOT Officers. (Over all length)
22
-
-
... More
Supplying and fixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification and as directed by SIPCOT officers.
8
-
-
... More
Supply and fixing of FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers etc., complete complying with standard specification and as directed by SIPCOT officers.
4
-
-
... More
UPVC Ventilator:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames, etc., complete complying with standard specification and as directed by SIPCOT officers. The ventilator should be got approved from the Executive Engineer before use on work
6.6
-
-
... More
UPVC Window
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
13.5
-
-
... More
Manufacturing, Supplying and fixing of steel doors with the following specification MS angles of a size 40x40x6mm are used for the outer frames and MS angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm MS flat is provided at required intervals in the shutter frames 18 G CR sheet is laid as panel in the shutter and welded intact. MS flat 18x5mm is welded over the 32x6mm MS flat sand witching the CR sheet in between, Additional stiffener with 18x5mm MS flat is provided diagnonally at the rear side of the shutter, 3 Nos hinges in case of single leaf and 6 nos of hinges in double leaves shutter to be provided 6 nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frame of the door in single leaf door, one more more aldrop is provided in the inner lock rail section of the door. One rotaining locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door MS flat 32mmx3mm at 1.1Kg/M is provided on the one shutter and conceal the gap between the two shutters at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. all members are given a coat of red oxide primer as directed by the SIPCOT Officers. the rate includes cost of all materials , labour charges, taxes, transportation to site of work loading and unloading and all other incidental charges etc., complete complying with standard specification and as directed by the SIPCOT Officers.
6
-
-
... More
Supplying and fixing of M.S.grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification and as directed by the SIPCOT Officers.
1280
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT Officers.
1063
-
-
... More
Plastering in cement mortor 1:4, 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT Officers.
46
-
-
... More
Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the SIPCOT Officers.
1073
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complete complying with standard specification and as directed by the SIPCOT Officers.
189
-
-
... More
Flooring with following Plain ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification and as directed by the SIPCOT Officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
49
-
-
... More
Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the SIPCOT Officers. Dadooing with printed design colour glazed tiles of size 450mm x 300mm x 8mm
186
-
-
... More
Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification and as directed by the SIPCOT Officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
48
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
50
-
-
... More
Double Nosing for Granite Slab etc., complete complying with standard specification and as directed by the SIPCOT Officers.
61
-
-
... More
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
10
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the SIPCOT Officers.
116
-
-
... More
Supplying and painting the walls with two coats of wall putty asinstructed by the SIPCOT Officers including preparation ofsurface curing, etc., complete in all floors complying with standard specification and as directed by the SIPCOT Officers. (The wall putty shall be got approved by theExecutive Engineer before use of work).
328
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the SIPCOT Officers.
388
-
-
... More
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wallsurface ect., complete complying with standard specification and as directed by the SIPCOT Officers.
522
-
-
... More
White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
53
-
-
... More
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification and as directed by the SIPCOT Officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
50
-
-
... More
Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the SIPCOT Officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
26
-
-
... More
Supplying and fixing in position of PVC Coated Chain link fencing 12G 1.5"x1.5" including stiffner wire for fixing top and bottom and tying the fencing to the post with Aluminium binding wire etc., complete complying with standard specification and as directed by the SIPCOT Officers.
3205
-
-
... More
Providing and fixing reinforced cement concrete perforated precast slab of 75mm thick with cement concrete 1:1.5:3 for drain cover slab . Rate shall include for providing necessary casting platform, shuttering, reinforcement as detailed below, finishing exposed faces smooth wherever necessary and pointing the joints with C.M 1:3, 15 mm thick curing and fixing in position etc complete and as directed. Rate shall include for providing necessary MS angles of required size based on the thickness of precast slab and to be fixed on the edges of the precast slab including grouting the lugs with Cement concrete 1:1.5:3, GI Hooks for lifting the slab etc complete, as directed for trench covers, drain covers etc., complete complying with standard specification and as directed by the SIPCOT Officers.
505
-
-
... More
Providing and fixing reinforced cement concrete perforated precast slab of 40mm thick with cement concrete 1:1.5:3 for drain cover slab . Rate shall include for providing necessary casting platform, shuttering, reinforcement as detailed below, finishing exposed faces smooth wherever necessary and pointing the joints with C.M 1:3, 15 mm thick curing and fixing in position etc complete and as directed. Rate shall include for providing necessary MS angles of required size based on the thickness of precast slab and to be fixed on the edges of the precast slab including grouting the lugs with Cement concrete 1:1.5:3, GI Hooks for lifting the slab etc complete, as directed for trench covers, drain covers etc., complete complying with standard specification and as directed by the SIPCOT Officers. (Foundation and Basement)
1.7
-
-
... More
Providing and fixing of Brick cladding tiles of size 215x60x12mm thick on 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive over rough plaster surface excluding cost of rough plastered surface. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
9
-
-
... More
Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of 100mm dia including labour for laying including earth work excavation, re-filling the trench with excavated earth, sand filling, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
100
-
-
... More
Supply and fixing of GI Pipes of following dia with one coat of red oxide primer for fencing post including necessary screws, clamps, welding charges etc., complete complying with standard specification and as directed by the SIPCOT Officers.
-
-
-
... More
a) 50mm dia GI pipe
1505
-
-
... More
b) 40mm dia GI pipe
2580
-
-
... More
Levelling and filling cricket ground in to the suitable gradient, applying water to the ground and allow for 3 days, after15 days, removing any vegetation or grass, or wild grass growth if necessary and thoroughly mixing the earth and leveling to the required gradient etc., complete complying with standard specification and as directed by the SIPCOT Officers and the SDAT officers.
17672
-
-
... More
Supplying and conveying the soil mixtures of red soil, savudu of good quality and manure in the proportion of 25%, 50% and 25% respectively, and thoroughly mixing, and depositing to a average depth of 3” in the football ground to a gradient specified including cost of red soil, savudu and manure etc., complete complying with standard specification and as directed by the SIPCOT Officers and the SDAT officers.
1770
-
-
... More
Supply and filling with Conveyed earth suitable for natural turf forming except clayey soil and stoney earth including levelling and manual compaction etc., complete complying with standard specification and as directed by the SIPCOT Officers and the SDAT officers.
2620
-
-
... More
B. Plumbing Works
-
-
-
... More
Supplying and fixing in position white/ colour special delux model glazed cascade type paryware/Hindware/Equivalent wall mounted European water closet of best quality and approved make with 100mm "P" or "S" trap connecting with CI pipe of 100mm dia/ PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing,spun yarn, teak wood plugs,brass screws, etc., including supplying and fixing 10 litres capacity PVC/12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball value with polythene float with brass handle, union cuppling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 nos), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover, Wall Fitting, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
13
-
-
... More
Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve,15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc Without Pedestal etc., complete complying with standard specification and as directed by the SIPCOT Officers
7
-
-
... More
Supplying, fixing, testing and commissioning approved make Urinal with piller cock fixed above counter with 32mm dia CP waste coupling, 32mm dia C.P.bottle trap with C.P. extension pipe, 1 No. C.P. flexible inlet connection pipe G.I. expansion bolts etc., including silicon sealant, complete complying with standard specification and as directed by the SIPCOT Officers
3
-
-
... More
Supplying, fixing, testing and commissioning of approved make 15mm CP Concealed Stop cock with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete complying with standard specification and as directed by the SIPCOT Officers
5
-
-
... More
Supplying, fixing, testing and commissioning approved make 15mm CP CP Two Way Bib Cock with Health Faucet with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete complying with standard specification and as directed by the SIPCOT Officers
13
-
-
... More
Supplying, fixing, testing and commissioning approved make Mirror 600X450 with necessary fixing screws etc complete complying with standard specification and as directed by the SIPCOT Officers
8
-
-
... More
Supplying, fixing, testing and commissioning approved make Angle valve with necessary fittings etc., complete complying with standard specification and as directed by the SIPCOT Officers
18
-
-
... More
INTERNAL DRAINAGE SOIL AND WASTE PIPE SYSTEM:
-
-
-
... More
Supplying and fixing in position UPVC specials / Pipe of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specification and as directed by the SIPCOT Officers. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
... More
a) 40 mm dia
15
-
-
... More
b) 50 mm dia
20
-
-
... More
UPVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS UPVC Elbow
-
-
-
... More
a) 40 mm dia
10
-
-
... More
b) 50 mm dia
13
-
-
... More
UPVC Bend
-
-
-
... More
a) 40 mm dia
5
-
-
... More
b) 50 mm dia
8
-
-
... More
UPVC Tee
-
-
-
... More
a) 40 mm dia
4
-
-
... More
b) 50 mm dia
7
-
-
... More
UPVC Reducer
-
-
-
... More
a) 50mm x 40 mm dia
6
-
-
... More
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specification and as directed by the SIPCOT Officers. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
... More
a) 75 mm dia
15
-
-
... More
b) 110 mm dia
20
-
-
... More
c) 160 mm dia
15
-
-
... More
PVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS PVC Elbow
-
-
-
... More
a) 75 mm dia
8
-
-
... More
b) 110 mm dia
5
-
-
... More
PVC Shoe
-
-
-
... More
a) 110 mm dia
4
-
-
... More
PVC Y
-
-
-
... More
a) 75 mm dia
8
-
-
... More
b) 110 mm dia
4
-
-
... More
PVC Tee with Single Door
-
-
-
... More
a) 75 mm dia
4
-
-
... More
b) 110 mm dia
4
-
-
... More
PVC Bend
-
-
-
... More
a) 75 mm dia
4
-
-
... More
b) 110 mm dia
4
-
-
... More
Supplying, laying, jointing, testing and comissioning of approved make PVC floor trap with C P grating with required concrete encasing all around, etc., complete complying with standard specification and as directed by the SIPCOT Officers
-
-
-
... More
a) 110 x 75 mm dia (20 mm water seal)
21
-
-
... More
Rain Water System
-
-
-
... More
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line, etc., complete complying with standard specification and as directed by the SIPCOT Officers. 110mm dia PVC Pipe
22
-
-
... More
PVC Specials for Rainwater down fall pipe works PVC Elbow - 110mm dia
8
-
-
... More
EXTERNAL DRAINAGE SYSTEM:
-
-
-
... More
Supplying, laying, jointing, testing and commissioning approved make PVC 6kg pipes SWR grade confirming to IS 13592 Class "B" with rubber ring joints confirming to IS 5382 for solvent jointing for Suspended piping in ceiling Lvl. The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. The quoted rate should include encasing the pipes in toilet sunken in M-15 grade concrete as per specifications 100mm thk. all around with necessary shuttering arrangement, etc., complete complying with standard specification and as directed by the SIPCOT Officers
-
-
-
... More
a) 110 mm dia
20
-
-
... More
a) 160 mm dia(soil pipe)
20
-
-
... More
Supplying, fixing, testing and commissioning of glazed stoneware gully traps, 550x550mm C.I. grating (medium duty), 100 mm dia outlet set in PCC 1:4:8 bed, 115 thick masonry chamber in CM 1:4, internal and external plastering 12mm thick in CM 1:6, necessary earthwork, C.I. cover (medium duty) etc., complete complying with standard specification and as directed by the SIPCOT Officers
6
-
-
... More
Providing and constructing inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm, benching in CC M-15, internal faces plastered smooth in CM 1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
-
-
-
... More
a) 600 x 600 mm size internal and depth more than 450 mm but not exceeding 850 mm
3
-
-
... More
b) 600 x 600 mm size Heavy duty cover
6
-
-
... More
Supplying and fixing PVC foot steps
22
-
-
... More
HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders (SS.20B), etc., complete complying with standard specification and as directed by the SIPCOT Officers.
20
-
-
... More
INTERNAL WATER SUPPLY SYSTEM
-
-
-
... More
Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The PVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
... More
a) 20 mm dia
10
-
-
... More
b) 25 mm dia
8
-
-
... More
c) 32 mm dia
7
-
-
... More
PVC Specials for water supply arrangements Elbow
-
-
-
... More
a) 20 mm dia
15
-
-
... More
b) 25 mm dia
13
-
-
... More
c) 32 mm dia
4
-
-
... More
Tee
-
-
-
... More
a) 20 mm dia
13
-
-
... More
b) 25 mm dia
8
-
-
... More
c) 32 mm dia
4
-
-
... More
Coupler
-
-
-
... More
a) 20 mm dia
11
-
-
... More
b) 25 mm dia
8
-
-
... More
c) 32 mm dia
4
-
-
... More
Reducer
-
-
-
... More
a) 25 mm x 20 mm
10
-
-
... More
b) 32 mm x 25 mm
5
-
-
... More
c) 40 mm x 32 mm
4
-
-
... More
External Water Supply System from OHT
-
-
-
... More
Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specification and as directed by the SIPCOT Officers. The PVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
... More
a) 40 mm dia
15
-
-
... More
PVC Specials for water supply arrangements
-
-
-
... More
Elbow - 40mm dia
5
-
-
... More
Coupler - 40 mm dia
5
-
-
... More
Tee - 40 mm dia
5
-
-
... More
External Pumping Water Supply System
-
-
-
... More
Supplying, laying, jointing, testing & Commissioning of uPVC Schedule 80 pressure pipes as per ASTM D 1785 with Sch 80 Fittings as per specifications, jointing with hold tite / super tite & tefflon tape and complete with fittings such as sockets, unions, reducers long or short bends, elbows, nipples flanges,checknuts,etc. Pressure testing of piping and back filling of trench complete as required. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete for external pipes in shaft, complying with standard specification and as directed by the SIPCOT Officers. (For under ground external water supply piping.) a) 32 mm dia (UG Sump to OH Tank)
20
-
-
... More
Elbow - 32 mm dia
20
-
-
... More
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specification and as directed by the SIPCOT Officers. (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
... More
Fixing Gun Metal Wheel Valve - 40 mm dia
4
-
-
... More
Providing and placing on terrace Polyethylene water storage Tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and overflow pipes, including cost of all materials, labour transport charges, HOM and testing etc., complete complying with standard specification and as directed by the SIPCOT Officers
5000
-
-
... More
C. Electrical works
-
-
-
... More
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )etc., complete complying with standard specification and as directed by the SIPCOT Officers
44
-
-
... More
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End, etc., complete complying with standard specification and as directed by the SIPCOT Officers
22
-
-
... More
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End, etc., complete complying with standard specification and as directed by the SIPCOT Officers
4
-
-
... More
Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.etc., complete complying with standard specification and as directed by the SIPCOT Officers
31
-
-
... More
Supply and fixing of single box type 4' 20W LED fitting with LED tube complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting, etc., complete complying with standard specification and as directed by the SIPCOT Officers
14
-
-
... More
Supply and fixing of single box type 4' 20W LED fitting with LED tube complete with electronic ballast with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
14
-
-
... More
Supply and fixing of 150W Highbay LED light with integrated driver with PDC housing with IP66 protection, heat resistance tempered glass for protection with 4KV Surge protection on the existing angle iron frame work with PVC unsheathed leads with painting of suitable colour, etc., complete complying with standard specification and as directed by the SIPCOT Officers
4
-
-
... More
Supply and fixing of Mirror light 20W LED Battern complete with on wall with PVC unsheathed FRLS Copper leads from terminals to the fitting, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
3
-
-
... More
supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting, etc., complete complying with standard specification and as directed by the SIPCOT Officers
9
-
-
... More
supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm down rod with fan clamp with side plates and cross arm of size 450mm (18"), etc., complete complying with standard specification and as directed by the SIPCOT Officers
2
-
-
... More
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall , etc., complete complying with standard specification and as directed by the SIPCOT Officers
13
-
-
... More
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan, etc., complete complying with standard specification and as directed by the SIPCOT Officers
13
-
-
... More
Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections (Higher End), etc., complete complying with standard specification and as directed by the SIPCOT Officers
3
-
-
... More
Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion, etc., complete complying with standard specification and as directed by the SIPCOT Officers
180
-
-
... More
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections(Higher End) etc., complete complying with standard specification and as directed by the SIPCOT Officers
4
-
-
... More
Supply and fixing of 32A DP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection, etc., complete complying with standard specification and as directed by the SIPCOT Officers. (The FP MCB and metal enclosure should be with Higher End make.
3
-
-
... More
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only (Higher End), etc., complete complying with standard specification and as directed by the SIPCOT Officers
3
-
-
... More
Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion, etc., complete complying with standard specification and as directed by the SIPCOT Officers
180
-
-
... More
Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only, etc., complete complying with standard specification and as directed by the SIPCOT Officers. i. 63A 4P MCB - 1 no.
ii. 63A DP MCB Isolator -3 nos.
iii. 6A to 32A SP MCB - 12 nos.
3
-
-
... More
Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door ) with 1 no. 125 A 4 P MCCB switch as incoming and 2 nos. 63A 3P MCB , 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only [Higher End], etc., complete complying with standard specification and as directed by the SIPCOT Officers i. 125 A 4P MCB - 1 no.
ii. 63A DP MCB Isolator -3 nos.
iii. 6A to 32A SP MCB - 3 nos. [DATA-6]
3
-
-
... More
Supply and fixing of brass cable gland for 3 ½ x70 sqmm PVC armoured LTUG cable with earth connection, etc., complete complying with standard specification and as directed by the SIPCOT Officers.
4
-
-
... More
Supply and laying of 3 ½ x 70 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good, etc., complete complying with standard specification and as directed by the SIPCOT Officers
90
-
-
... More
Supply and clamping of 3 ½ x 70 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps, etc., complete complying with standard specification and as directed by the SIPCOT Officers
60
-
-
... More
Supply and providing cable end termination of 3 ½ x 70 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection, etc., complete complying with standard specification and as directed by the SIPCOT Officers
4
-
-
... More
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry, etc., complete complying with standard specification and as directed by the SIPCOT Officers
3
-
-
... More
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection, etc., complete complying with standard specification and as directed by the SIPCOT Officers
22
-
-
... More
Supply and fixing of fancy glass shade and 7W / 9W LED bulb, etc., complete complying with standard specification and as directed by the SIPCOT Officers
4
-
-
... More
Supply and fixing of WT bulk head fitting with guard suitable for with 7W/9W LED bulb, etc., complete complying with standard specification and as directed by the SIPCOT Officers
14
-
-
... More
Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)
-
-
-
... More
Added GST of 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%