Rural Development And Panchayat Raj Department Tender

Random Rubble masonry in CM 1:5 foundation and basement including simultaneously flush pointing including curing neat finishing, etc., complete complying with standard specifiction.

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five sand) including curing neat finishing, etc., complete complying with standard specifiction.

Brick jelly 40mm size for filling soak pit inner etc., complete complying with standard specifiction.

Reinforced cement concrete 1:1.5:3 mix using 21mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete (sunshade)

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

Below GL

Above GL

Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete.

Supplying, fabricating, erecting and fixing of UV coated Poly carbonite sheet tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Supplying, fabricating, erecting and fixing of Stainless steel

Supplying, fabricating, erecting structural steel works

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty shoule be got approved by the Executive Engineer before use on work

Finishing the top of roof with Best quality vitrified tiles of size 600mm x 600mm x 8mm of approved colour, shade & quality laid in CM 1:3 20mm thick and pointed with white cement mixed same colour pigments etc., and 2% of water proffing compound by weight of cement complying with standard specification.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with

Dadooing the sides of the wall up to the required height and approved quality colour printed Glazed tiles of size 305 x 200 x 3 mmand set in CM 1 : 2,10mm thick and pointing with same colour cement of 4kg including cost and conveyance of all materials and

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used

cost and supply of wood plastic composit door

Supplying and fixing RCC Cover Slab including all the charges etc complete

Supplying and fixing 0.9 m dia RCC Ring for leach pit including all the charges etc complete

Painting two coat with approved quality of oil bound distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coats using Ist quality readymix enamel paint of approved colour including cost and conveyance and all labour charges etc.

Cost & Supply For I.W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Supplying and fixing in positon Indian make white glazed earthern ware squatting type urinal of best quality and approved make including dismantling masonry, if necessary nad re-doing the same tomoriginla condition, etc., complying with standard specifications . (The squatting type urinal should be got approved by the Executive Engineer before use on works).

110mm dia pvc pipe

110mm dia pvc door

110mm dia pvc Tee

2000lit HDPE Tank

Cost and Supplying and fixing in precast RCC ring labour charges,etc.,

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)