Rural Development And Panchayat Raj Department Tender

Earth work excavation and depositing onbank within initial lead and lift in hardgravelly soil for Cutting side drain etc,complete. as per SS20 A

Providing and Laying Gravel to 100mm compacted thick including cost & conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting byPower roller to achieve the required Proctor density at 100% compaction

Km 0/0-1/0

Km 1/0-2/0

Km 2/0-2/350

Providing and laying spreading andcompacting graded stone aggregate toWet Mix Macadam(WMM) specificationincluding premixing the material withwater at OMC in machanical mix plantcarriage of mixed material by tipper tosite laying in uniform layers 250mm thickwith pavers in SubBase/Base course onwell prepared surface and compactingwith vibratory roller to achieve thedesired density including cost ofmaterial,labour charges, rentals formachinery, fuel and all other incidentalcharges etc., complete.

Providing and laying Prime Coat over WBM/ WMM surface using 7 Kg ofEmulsion Bitumen (SS1) per 10 sqm forpreparatory to another bituminousconstruction over it, including cost of material, labour charges, rentals formachinery, fuel and all other incidentalcharges etc., complete as per Clause 502of MORTH Rev-5

Providing and laying TACK COAT over BT surface using 3 Kg of RS-1 Bitumen Emulsion/ 10 sq.m for preparatory toanother bituminous construction over it,including cost of material, labour charges,rentals for machinery,fuel and all otherincidental charges etc complete.includinglabour for spraying, hire charges forbitumen sprayer etc. Comp.

Advance patch work for making up the undulation in the existing B.T surface to anaverage thickness of of 25mm using 13.20mm IRC size HBG metal with 44 Kg of Bitumen-for 1cum of metal mixed in hot mix plant laying at site

Km 0/0-1/0

Km 1/0-2/0

Km 2/0-2/350

BC 25/30/40mm Thick (Grade-II) Using VG30 Bitumen and Plastic Waste Providing and laying BituminousConcrete to 25/30/40mm thick using 0.13cum of 19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and belowwith 46.28kgs of VG30 bitumen and 4.02Kgs of Waste Plastic (6%) forpremixing per 10sqm including cost andconveyance of all materials to CMP site,heating the bitumen and aggregate torequired temperature and mixing them inrequired temperature in central hot mixplant 20-30 ton capacity, conveying themix by tipper trucks to paver site,spreading the mix to uniform thickness of40mm with mechanical paver to thespecified grades and cross sections andconsolidated by 8-10 tonne Vibratory tothe required density etc., including labourfor attending to paver to site etc.,including hire charges and fuel chargesfor 20-30 t CMP with bitumen boiler,tipper trucks, Paver Finisher, Vibratoryroller and all other tools and plantrequired, including fuel and all otherincidental charges etc., complete as perspecification using CMP as per clause 507of MORTH Rev-5

Providing and laying of hot applied Thermoplastic compound 2.5 mm thickincluding reflectorising glass beads @250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glassbeads as per IRC:35. The finished surfaceto be level, uniform and free from streaksand holes etc., complete as per MoRT&Hspecification No.803

Provision for Hectometer Stone

Provision for Kilometer stone

Providing and erecting of Retro -Reflectorised Cautionary, Mandatory andInformatory signs (without definitionboard) made out of High IntensityPrismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 andASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixedover a back supporting frame of 25mm x25mmx3mm Mild Steel angle andsupported on a mild steel angle post 75X75X6mm with a clear height of notless than 2.10m from the ground level tothe bottom of the sign board and 0.60mbelow ground level. The sign post shouldbe painted as per IRC 67-2012 and firmlyfixed to the ground by means of properlydesigned foundation with M15 gradecement concrete 45cmX45cmX60cm sizeincluding cost and conveyance of allmaterials, equipment, Machinery and labour with all leads and lifts, loadingcharges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist ofminimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro- reflective sheeting shall be covered under 7 year warranty issued for fieldperformance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 . ( as per MoRT&H Specification No.801) 90 cmoctagon

Sub Estimate - Corewall

Earth work excavation and depositing onbank with in initial lead of 10 m andinitial lift of 2m in hard stiff clay, stiffblack cotton soil, hard red earth, earthmixed with small sized boulders and hardgravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mmISS metal including cost and conveyanceof all materials to site and all labourcharges for mixing, laying and curing etccomplete for bed blocks for 10 cum

Supplying and erecting centeringshuttering including necessary supportsfor plane surface in foundation andbasement and in all floors for R C Ccolumn footing column plinth beam,beams, roof slabs, staircase steps, bedblocks, critical pier etc using mild steelsheets of size 90 x 60 cm and 10 guagestiffened, welded with mild steel anglesof size 25mmx25mmx3mm for boardinglaid over silver oak (country wood)scantlings of size 10cm x 6.5cm spaced ofabout 90cm centre to centre andsupported by casurina props of 10cm to13cm dia spaced at 75cm centre tocentre complete complying with standardspecifications and as directed bydepartmental officers includingconveyance of all materials to site andproper centering etc complete. (ABOVEGROUND LEVEL)

Cement concrete 1:3:6 mix using 20mmISS metal including cost and conveyanceof all materials to site and all labourcharges for mixing, laying and curing etccomplete for bed blocks for 10 cum

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)