Public Works Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date11 Jan 2025
Closing Soon30 Jan 2025
Tender Amount₹ 1,75,52,81,000
Costs
EMD
₹ 87,87,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Grand Library And Intellectual Centre
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_518415_1Tender No
Tn.10/SE/date.17.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Grand Library and Intellectual Centre at Trichy in Trichy District.
Construction of Grand Library and Intellectual Centre at Trichy in Trichy District.
Construction of Grand Library and Intellectual Centre at Trichy in Trichy District.
Construction of Grand Library and Intellectual Centre at Trichy in Trichy District.
BOQ Items
... More
Supplying and filling GRAVEL in 'foundation and basement in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
3950.7
-
-
... More
Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
3010.1
-
-
... More
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
1194.7
-
-
... More
Brick work in In Cement Mortar 1:5 using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
-
-
-
... More
Foundation & Basement
1124.7
-
-
... More
Ground floor
134
-
-
... More
Brick work in In Cement Mortar 1:6 using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
-
-
-
... More
In Ground floor
574.5
-
-
... More
In First floor
475
-
-
... More
In Second floor
440
-
-
... More
In Third floor
270
-
-
... More
In Fourth floor
265
-
-
... More
In Fifth floor
230
-
-
... More
In sixth floor
250
-
-
... More
In Seventh floor
295
-
-
... More
In Eigth floor
115
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
6225.6
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
29575
-
-
... More
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
12433
-
-
... More
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
6843
-
-
... More
Centering for curved surfaces of all RCC items of work
2135
-
-
... More
For circular columns
942
-
-
... More
Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.
34776
-
-
... More
Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retad setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg. of cs sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
Foundation & Basement
1718.5
-
-
... More
In Ground floor
145.7
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-35 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 425 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
In Ground floor
253
-
-
... More
In First floor
195
-
-
... More
In Second floor
363
-
-
... More
In Third floor
188
-
-
... More
In Fourth floor
262
-
-
... More
In Fifth floor
188
-
-
... More
In sixth floor
188
-
-
... More
In Seventh floor
160
-
-
... More
Providing and laying in position, standardised concrete Mix M-25 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, reta?d setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
Foundation & Basement
5446
-
-
... More
In Ground floor
900
-
-
... More
In First floor
790
-
-
... More
In Second floor
897
-
-
... More
InThird floor
683
-
-
... More
In Fourth floor
660
-
-
... More
In Fifth floor
616
-
-
... More
In sixth floor
619
-
-
... More
In Seventh floor
538
-
-
... More
In Eigth floor
170
-
-
... More
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
24397.4
-
-
... More
Design and execution of post tensioning work, including decoiling, the strands, cutting to the required lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc. (Shuttering, concreting & reinforcement steel shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting,packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering, concreting & reinforcement steel which shall be payable under respective
items separately.
35
-
-
... More
Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers
372.7
-
-
... More
Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
... More
In Ground floor
119
-
-
... More
In First floor
109
-
-
... More
In Second floor
112
-
-
... More
In Third floor
36
-
-
... More
In Fourth floor
36
-
-
... More
In Fifth floor
36
-
-
... More
In sixth floor
36
-
-
... More
In Seventh floor
36
-
-
... More
Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)
3717.5
-
-
... More
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 10-12mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
592.5
-
-
... More
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
256
-
-
... More
UGT/OHT (inside) waterproofing with Anti-
microbial Coating
Waterproofing: Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface of the UGT/ OHT tank applied @ 2.2kg/m2 in 2 coats to achieve
1.2mm DFT, having Elongation at break 120% as per ASTM D 412, Tensile strength 1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. Followed by applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Mortar on as protective plastering @ 29kg/m2. The material having Compressive strength of 38 MPa at 28 days as per EN 12190, Adhesive Bond Test, 1.5 Mpa as per EN 1542, followed by Water curing by sprinkling water for 3 times a day for 5- 7 days. Followed by applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti- algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification
272
-
-
... More
Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.
-
-
-
... More
Single leaf
27.1
-
-
... More
Fabricating, Supplying and fixng in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of lenght 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 120mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter.An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete
4.7
-
-
... More
Supplying and fixing frameless fully Glass double leaves door as per requirements to the following specification: The Glass door is made of saint gobain/ Asahi (or) equivalent make glass 12 mm thick clear toughened glass with floor spring of heavy duty , patch fittings, lock patch,door is endorsed with stainless steel pull handles, door stopper and etc.., and attached to the existing masonry or concrete structures with 995 weather sealent and other accessories etc.,The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
300
-
-
... More
Supply and erection of Double Leaves Fire Rated Door as per NBC with following specifications.
A.Door Frame 1.6mm: Galvanized 120 GSM branded make JSW
b.Door leaf 1mm: Galvanized 120 GSM branded make JSW
c.Shutter Thickness: 46mm
d.Honeycomb: In-fill
e.Glue Macroplast UR-7221
f.Door Hinges: 4" x 3" x 3mm, Double Ball: Make Assa Abloy Yale Ball bearing Butt Hinges Grade SS304 - Finish SS
g.Door Closer with Standard Arm Finish:Silver
h.Lock Set: Dead Lock with both side key
i.Door Orientation: To be confirmed by client
j. Mounting of door: Brick wall mounted
k. Powder Coating : Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns
l.Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent
m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalent
n.Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frame
0.Rated Glass Schott Pyran with Frame
p.Anchor Bolt with Endcaps
The above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, plastering, scaffolding all other conveyance as per standard methods and as directed by the Departmental Officers.
-
-
-
... More
Double Leaves Fire Rated Door with Frame
355
-
-
... More
Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.
124
-
-
... More
Supplying & fixing Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc.,The rate in inclusive of bottom thehold fasts and provision to aldrip tower bolt hinges and lock plate etc, filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specification.
280
-
-
... More
Supplying & fixing of WPC (Wood Polymer Composite) Door, Frame extruded with size 75mm x 50mm. The single core door made of rigid WPC compound with minimum Bulk Density of 900 KG/ Cub.Mt. & shore hardness of 55. Supplying & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. For the aesthetic appearance, the door shall be a printed digitally on one side of the shutter. The WPC door shall be fixed onto the WPC frame with 3 Nos of 5” SS Hinges and the door shall have 2 towerbolt on one side and 1 towerbolt or aldrop on other side for locking system and 2 numbers of handle on the either side of the door shutter, all made of aluminium.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidential charges etc., complete complying with standard specification and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
150
-
-
... More
Supplying and fixing of WPC swing door, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. The door shall be a plain matt board .The WPC door shall be fixed onto the Aluminium “G” type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 6” in SS, with neccessary locking arrangements etc.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidential charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
70
-
-
... More
Supplying and fixing in position of Fire Fighting Duct Window having proper glass window type double door with universe open key, painted inside white and outside post office red for the sizes of 1300 x 900 x 500mm (L x B x D) fabricated using 25 x 3mm MS 'L' Angle and all sides covered with 2mm thick MS sheets, suitable arrangements to kept 2 Nos. of Fire fighting Hoses and 1 No. Branch Pipe, mounted in fire duct using anchor fasteners, etc., as per standard specifications and as directed by the Departmental Officers.
48
-
-
... More
Providing and Applying two component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @
2.1kg/m2 in single coat using 3mm notched trowel to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geo-textile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids 98%, Tensile strength
6 Mpa, Elongation at break 600% as per ASTM D 412, crack bridging ability (no cracks up to 3.2mm) confirms to ASTM C 1305, Puncture resistance 300N as per ASTM E154, Shore A Hardness 70 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the first coat in still wet, treatment of cracks and laying 120GSM Geo-textile as seperation/protective layer over the fully cured PU coating completely as per specification.
3500
-
-
... More
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid: 7 Powder), to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve .1.2mm DFT, having Elongation at break 120% as per ASTM D 412, Tensile strength 1N/mm2 as per ASTM D 412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836, Water penetration (5 bar pressure) as per BS EN 12390. The finished cost to inclued surface preparation, making coving of 50mm x 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.
650
-
-
... More
UPVC Window: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.
230
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.
62
-
-
... More
Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,
-
-
-
... More
Manually operated
3.8
-
-
... More
Electrically operated type
14.5
-
-
... More
Supplying and fixing M.S. Grill for Doors, windows, ventilators, including cost of one coat of red oxide primer. The design of MS Grill should be got approved from the departmental officers before use on work.
36030
-
-
... More
Supplying ans fixing in position of Modular Stainless steel railing with toughened glass insertion with following specification. The stainless steel shall be of 304 grade. The top hand rail shall be 50mm dia and 1.6mm thick. The vertical balusters shall be 38mm square tube and 1.00mm thick all joints shall be finished smoothly with necessary fittings and clamps. The toughened glass shall be 12mm thick and fixed with vertical balustrades with necessary ss clamping arrangements.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidential charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, should be approved by the Executive Engineer before use on works)
370
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete complying with standard specification and as directed by the departmental officers.
496
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for Staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100x100x6mm MS base plate encased in the base concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges etc., complete complying with standard specification and as directed by the departmental officers.
1105
-
-
... More
Supplying and Fixing in Position Urinal Partition with White Marble slab( Adanga) 18mm to 20mm thick of 4'0''x2'0'' size and above of best quality including dismantling Masonry,if necessary and redoing the same to original condition etc., complete complying with standard specificationd (The Marable slab should be got approved by the Executive Engineer before use on works).
100
-
-
... More
Providing double nosing for Granite slab etc., complete as per standard specification and as directed by the departmental officers.
2650
-
-
... More
Supply and fixing of PVC Wall Corner beading etc., complete complying with standard specification and as directed by the departmental officers.
350
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
30066
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
19901
-
-
... More
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (water proof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying Ist coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc., complete.] The putty should be got approved by the Executive Engineer before use on work.
19500
-
-
... More
Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three Plastering sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
175
-
-
... More
Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
272
-
-
... More
Brick Jelly Lime Concrete 1:2:5 using 40mm brick jelly (One Cement and Two Crushed stone Sand and five brick jelly) laid over the toilet depression portions in a single layer of required slope etc., complete as per standard specification and as directed by the deparmental officers.
310
-
-
... More
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
1001
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
13963
-
-
... More
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.
19279
-
-
... More
Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).
13300
-
-
... More
Painting priming coat of newly plastered wall surface of first class quality including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
19500
-
-
... More
Providing ANTI-TERMITE treatment to soil adjacent under building foundation, plinth periphery of the building by applcation of chemicals of ISI 6313-1981 part I to IV in stages to suit the progress of work as per the detailed specification (Measurements taken for the plinthe area for the purpose of payment) including breaking of termite mounds, making holes with clow bar, closing the holes after the treatment and incliding cost of chemicals, labour charges, transport and storing etc., complete complying with the standard specification and as directed by the departmental officers.
Stage.I. spraying anti- termite treatement chemicals solution for foundation concrete surface laying the foundation concrete bottom and sides of the foundation.
Stage.II. Spraying anti-termite chemical solution to the grade beam level, spraying for the grade beams, brick, masonry in superstructure in contact with the back fill earth.
Stage.III. Spraying anti-termite treatment, chemicals solution on sand for the flooring before laying the flooring zone, Treatment has tobe carried out by making crow bar holes at an interval of 12" to a depth of 8" on the sand filling in basement and after levelling operation is over.
Stage.IV. Spraying anti-termite treatment chemicals solution around the building (out side) by making crow bar holes at an interval of 12" to a depth of 8" in the periphery of building and chemical poured inside the holes and closed after the treatement.
3385
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
6517
-
-
... More
Paving the floor with best approved quality Leather finished Granite slab (Jet Black) of size 1200 x 600 of 18 / 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The rate is inclusive of all materials, labours, conveyane and fixing in position with all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.(The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works)
560
-
-
... More
Flooring with Italian Marble slab of size 1200 x 600 of 16 / 18mm thick and above free from all defects in all floors over a base layer of CM 1:3, 20mm thick. The marble slab shall be laid over the cement mortar by applying white cement slurry in between base mortar and marble slab and pointed with white cement neatly including polishing with polishing stone and oxalic acid, to get perfectly smooth and glossy finish. including hire charges for polishing machine and power consumption charges etc. The marble slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete.
510
-
-
... More
Paving the floor with best quality Double charged Vertified tiles 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
1371
-
-
... More
Paving the floor with best quality Vertified Tiles of size 1200 x 600 x 10mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
3200
-
-
... More
Providing and Filling the tile joint with epoxy grout with following specification:
Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc. complete.
620
-
-
... More
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
1874
-
-
... More
Dadooing walls with granite tiles of size 1'0" x 1'0" of 10mm thick Jet Black and similar varieties of set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
430
-
-
... More
Dadooing walls with printed design colour glazed tiles of size 300mm x 600mm x 10 mm best approved quality, white / colour glazed tiles set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
3400
-
-
... More
Paving the floor with best quality Tactile Paver Type of New Tek BT Yellow Colour Ceramic Tiles of size 305 X 305 X 15mm for Vision Impairment Person of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
275
-
-
... More
Supplying and fixing wall cladding with best approved quality Decorative pressed tiles of 12 mm thick of all sizes and shapes in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc.,complete complying with standard specification and as directed by the departmental officers.
495
-
-
... More
Supplying and applying of Epoxy resin based floor topping of good quality and approved variety over the primer prior application mix mechanically the two components using heavy duty mixing machine until achieving a homogenous mix and spread on the prepared area using serrated notch, travel for a thickness of 3mm. spike roller shall be rolled over to remove the entrapped air. (Total system thickness 3mm Epoxy flooring) etc. complete complying with standard specification and as directed by the departmental officers. The rate is inclusive of all materials, labour charges transportation and all other incidental charges etc complete. (The make, colour of Epoxy Resin, Epoxy hardener for primer application, scratch coat and Epoxy Top coating application, should be got approved by the Executive Engineer before use on works)
57
-
-
... More
Supplying and fixing Triangular Open Cell Ceiling 75x 75mm Triangular Aluminium Open Cell Ceiling: Supplying and fixing Aluminium Open Cell ceiling of approved colour with 75 x 75 mm Triangular pattern, consisting of Main Runner, Cross Runners of sleek U-Shaped Profiles 10mm wide x 50mm deep x 0.5 mm thick with inwardly returned edges of 2.5mm. Coil Coated on a Continuous Paint Line, Double baked and Roll formed from enamelled Corrosion Resistance 3000 Aluminium Alloy (Al.Mg) for higher strength and good Roll Forming characteristics. The Main Runner shall be fixed at a distance of 1.2mtrs c/c on diagonal pattern and shall be suspended by means of G.I. Suspension Rod 4mm diameter and a Galvanized Suspension Spring Clip at a distance of 1.2mtr c/c. The Cross-Runner shall be fixed to the Main Runner to archive a open square cell pattern. The interlocking of panels will determine a flush joint. The Linear Aluminium ceiling system should meet the required standards for Green Pro certification and should qualify as green product as per CII green products and services council The manufacturer should be ISO 9001:2015 Quality Management System Certification compliant with in house testing facility and should have their own manufacturing plant in India. True Ceiling has to be Black colour painted before installing the ceiling should be considered in the scope of the vendor. Suspension System: The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.2mtrs centre to centre.
Paint Finish: Aluminium Main Runners Cross Runners Upper Section, Lower Section of U-Shaped Profiles shall be chromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and Finish Coat, the other side (inner side) with a Primer Coating and Skin Coat on a Continuous Paint Line.
Mode of Measurements: Measurements shall be wall to wall, measuring the Surface / plan area without any deductions for lights, diffusers, columns or any other openings etc. The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works)
2040
-
-
... More
Supplying and laying wooden flooring of 8mm thick approved make using click laminated floor with in built 3mm sound block class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copy of plank size 1288 x 196 x 8mm having joints tongue and groove secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850kg /m3 beneath the laminated wooden panel to absorb the sound caused The rate is inclusive of all materials, labours, conveyane and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
535
-
-
... More
Supplying and fixing of SS Wall Cladding etc., complete complying with standard specfication and as directed by the departmental officer.
1460
-
-
... More
Supplying and fixing of False flooring of Prelaminated Calcium Sulphate (Metro TSK-German Make) with 60 minute fire rating false floor panels in size 600 x 600mm of 34mm thick at an elevation of 600mm FFH,using understructure comprising of required mm cross beams and GI Pedestals securely fixed to the ground using dash fastners. The pedestals should have 2 check nuts to ensure the height adjustments upto 25mm. The panels should be finished with a High pressure anti static laminate having a 6mm be ading on all 4 sides for edge protection. Weight bearing capacity shouls be 3.6 KN CPL and UDL of 15KN Ht.-600mm Installation should comply to earthquake protection Thickness of tile will be based on structural caculations supplied by manufacturer and vetted by consultants to suit weight bearing capacity indicated above. Item includes Providing and fixing of Understructure in size 600 x 600mm at an elevation of 600mm FFH, using understructure comprising of 600mm cross beams and GI Pedestals securely fixed to the ground using dash fastners. The pedestals should have 2 check nuts to ensure the height adjustments upto +- 25mm. Weight bearing capacity should be 3.6 KN CPL and UDL of 15KN Ht. 600mm.Prelaminated Calcium Sulphate (Metro TSK-German Make) with 60 minute fire rating false floor panels in size 600 x 600mm - 34 thick at an elevation of 600mm FFH,using understructure comprising of required mm cross beams and GI Pedestals securely fixed to the ground using dash fastners. The pedestals should have 2 check nuts to ensure the height adjustments upto 25mm. The panels should be finished with a High pressure anti static laminate having a 6mm be ading on all 4 sides for edge protection. Weight bearing capacity shouls be 3.6 KN CPL and UDL of 15KN Ht.-600mm Installation should comply to earthquake protection Thickness of tile will be based on structural caculations supplied by manufacturer and vetted by consultants to suit weight bearing capacity indicated above.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidential charges etc., complete complying with standard specification and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
10
-
-
... More
Supplying and fixing Carpet tile flooring of 6mm thick of Approved quality pasted on existing base with the help of adhesive including one time cleaning and shampoo washing at final stage or as per client requirment. The rate is inclusive of laying, conveyane, all other Tools and Plants involved in the work charges and all other incidental charges etc.,The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
4830
-
-
... More
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
-
-
-
... More
40mm thick
427
-
-
... More
Providing Vaccum Dewatering for flooring etc. complete and as directed by the departmental officers. The above process includes Vaccum dewatering the concrete flooring by using vibrating screed, Vaccum pumps, suction mats, filter pads and accessories etc.
4830
-
-
... More
Supplying and fixing in horizontal level Mineral fibre board false ceiling silhouette grid system of 600 x 600 x 12mm panel size including neccessary frame work such as hanging,pole,wall angle dass fastner and etc with 15mm white flanges incorporating 6mm central reveal in approved colour of Armstrong/AMF or approved equivalent make using hot dipped galvanized steel section, exposed surface chemically cleaned capping pre-finished in baked polyester paint wall angle of size 3000mmx19mmx19mm used in the periphery of the ceiling fixed to the wall partition / RC Column / band walls with the help of screws at 600mm C/C. Main runner spaced at a 1200mm C/C suspended by using 2mm dia G.I. wire hanger securely fixed to the structural soffit of RC slab by using 6mm anchor fastener at every 1200mm(max) and 1200mm long cross tee to be interlocked between in Main runner at 600mm.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer. ( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
40
-
-
... More
Supplying, fabricating, erecting and fixing Hilux (or) equivalent board false ceiling upto a ceiling height of 4.5m from floor level.Using Hilux board plain sheets (10mm thick)
5067
-
-
... More
Supplying and fixing customized Fibre CNC cut tiles special type of false ceiling with following specification. The material should be waterproof and moisture resistant with high flame retardent.The tile should be of 595mmX595x12mm with easy demountable Lay-In channel system manufactured of 0.50mm thick Coil Coated through continuous coil coating process. The tile sides should be sufficiently stiff to ensure a minimum deflection across the length of tile. All tiles will be bevel edged. The tile should be laid into lay in profile of 0.50mm thick Aluminium channel including neccessary frame work such as hanging,pole,wall angle dass fastner and etc . The lay in profile shall be supported from slab by means of rigid suspension of 3mm dia G.I. Rod, Fixed on Clamp with Luxalon or equivalent Clip. Necessary cut-outs for light fixtures fittings has to be provided at ceilings. The Lay-In system shall be suspended by means of G.I. suspension rod 3 mm diameter and a Galvanised suspension spring clip at a distance of 1.20mtrs centre to centre. , The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
3770
-
-
... More
Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120Kgs/m3, weight 1.8/2.4/3 kg/m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angel with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 Main T wtih flange width 15mm, height 32mm and length 3600mm, , from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel ot the Main T15 to result in 600 x 600mm double. The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance etc. complying to standard specification.
1670
-
-
... More
Supplying and fixing Aluminium Luxalon 100mm X 100mm Aluminium Open ceiling of approved colour consisting of Main Runner, Cross Runners of sleek U-Shaped Profiles 15mm wide x 38mm deep x 0.5mm thick with Continuous Paint Line, Double baked and Roll formed from enamelled Corrosion Resistance Aluminium Alloy (Al.Mg) for higher strength and good Roll Forming characteristics. The Cells are connected to form 100mmX 100mm Open cell at a module of 600mm laid on the T-15 grids. The Main tees and cross tees are fixed at a module to form 600X 600 mm and shall be suspended by means of G.I. Suspension Rod 4mm diameter and a Galvanized Suspension Spring Clip at a distance of 1.2mtr c/c. including neccessary frame work such as hanging,pole,wall angle dass fastner and etc
The Linear Aluminium ceiling system should meet the required standards for Green Pro certification and should qualify as green product as per CII green products and services council. The manufacturer should be ISO 9001:2015 Quality Management System Certification compliant with in house testing facility and should have their own manufacturing plant in India. The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
950
-
-
... More
Supplying and fixing Baffle ceiling of 50x100mm ( 50mm Width & 100mm Height) system comprising of U shape panels. Baffle panels shall be made out of 0.7-0.9 mm thick electro galvanized steel material in lengths of up to 4000mm including neccessary frame work such as hanging,pole,wall angle fastner and etc. The Coil should be stove enamelled on a continuous application for pre-treatment. The coils to go through 4 stages of pre-treatment, three times oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and topcoat of approved colour of 15 microns. Baffle Ceiling panels shall be mounted on slotted galvanized grid profile of minimum 2mm thickness in a module of 150mm. Baffle grid shall be suspended and supported by means of 6mm dia threaded ,suspenders at a distance of 150mm from the edge and 1200mm c/c. Baffle fixing brackets shall be used to keep the ceiling in correct place for the leveling purpose. Baffle panels shall be coil coated in a desired specification. Baffle ceiling system shall be installed in compliances with manufacturer’s technical installation brochure and manual.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
3000
-
-
... More
Supplying and fixing Linear roll formed 180mm Beveled Slat Ceiling, manufactured out of 0.6mm thick coil coated on a corrosion resistance 3000 Aluminium Alloy series of approved colour. Panel size 180mm wide X 15 mm deep plain diagonal patten, Coil Coated on a Continuous Paint Line, and shall be stove enamelled in a continuous coil coating process with the approved colour on the exposed side and the reverse side with polyester primer including neccessary frame work such as hanging,pole,wall angle, fastner and etc.The coated coil is passed through a multistage high precision customised roll forming line to achieve the desired profile.. Panel shall be clipped to a baked enamelled customised Aluminium panel carrier manufactured in PLC controlled roll forming machine. The Carrier is of 60mm width x 30mm height and 0.90mm thick in standard length of 5 mtr in Aluminium alloy 3000 series (Al. Mg) black with cut outs to hold the panels in a module of 50/100/150/200 mm. 20mm gap between the panels is left open for better acoustics . The Carrier shall be suspended by means of G.I. suspension rod 6mm diameter, and a Galvanised suspension spring clip at a distance of 1.2mtrs centre to centre.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidential charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
1210
-
-
... More
Supplying & Fixing of Green Pro certified, 600X600mm GI Tile with easy demountable Clip-In U profile channel system manufactured out of 0.5mm thick Coil Coated on a continuous coil coating process. The Tile to be manufactured on advanced CAD/CAM equipment that includes several levelling stages in the manufacturing process achieved through ARKU SIX Hi configuration roller levelling process to ensure the flatness. Tile ends will be raised with pips and stops to ensure positive engagement into the spring to enable de-mounting of individual panels. The Tile sides will be sufficiently high to ensure a minimum deflection across the length of Tile. All Tiles will be bevel edged. The Tile shall be clipped into clip in profile of 0.5mm thick G.I. The clip in profile shall be supported from slab by means of rigid suspension of 4mm G.I. Rod, Hold on Clamp with Luxalon Clip. The Linear Aluminium ceiling system should meet the required standards for Green Pro certification and should qualify as green product as per CII green products and services council The manufacturer should be ISO 9001:2015 Quality Managemnt System Certification compliant with in house testing facility and should have their own manufacturing plant. Necessary cutouts for light fixtures fittings has to be provided at ceilings. Suspension System: The Clip-In U Rail system shall be suspended by means of G.I. suspension rod 6 mm diameter, and a Galvanised suspension spring clip at a distance of 1.2mtrs centre to centre.Mode of Measurements: Measurements shall be wall to wall, measuring the Surface / plan area without any deductions for lights, diffusers, columns or any other openings including neccessary frame work such as hanging,pole,wall angle fastner and etc.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer. ( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
290
-
-
... More
Supplying & Fixing Ecopon Solo Ceiling Circle with 800mm dia, saint gobain/ Asahi (or) equivalent. easily demountable manufactured from High density glass wool utilizing the 3RD Technology with Akutex FT surface on both the sides 85% Light reflectance (of which more than 99% is diffuse reflection). The panel should have 2.53 sabine value at 1000mm o.d.s. Ambient RH and temperature does not exceed 75% and 30 degree C. Thermal resistance (Lamda value-0,035-0,04W/mk). Certified by the Indoor climate Labelling,emission class M1 for building materials and recommended by the swedish Asthma and Allergy Association. Fully recyclable. The glass wool core of the element is to be tested and classified as non combustible according to pr EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501-1- European Standard including neccessary frame work such as hanging,pole,wall angle fastner and etc.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
500
-
-
... More
Supplying & Fixing Multi panel Combination Rythem ceiling Multi Slat Ceiling - Aluminium Linear Panel Ceiling with 20mm open groove: Providing and fixing Linear Multi combination Slat Ceiling 30mm/80mm/130mm/180mm, manufactured out of 0.5mm/0.5mm/0.5mm/0.6mm thick coil coated on a corossion resistence 3000 Aluminium Alloy series of approved colour. Panel size 30mm/80mm/130mm/180mm wide X 15 mm deep with Perforation of 2 mm diameter diagonal patten, 5 mm centre to centre apertures, 16 % openness, panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, and shall be stove enamelled in a continuous coil coating process with the approved colour on the exposed side and the reverse side with polyester primer. The coated coil is passed thru a multistage high precision customised roll forming line to achieve the desired profile. Double baked and roll formed from enamelled corrosion resistance Aluminium alloy 3000 series (Al. Mg) for higher strength and good roll forming characteristics including neccessary frame work such as hanging,pole,wall angle ,fastner and etcThe rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
1670
-
-
... More
Providing and fixing Acoustic wall Panelling (equivalent ot Armstrong ) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a "Helmholtz"fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be "tongue" and grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing not woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge. Installation: Install aluminium box section (provided by others) of section 50mm x 25mm or as approved by the Engineer-in-Charge on the solid wall horizontally using screws and plugs at spacing of 600mm centre to centre. Screw the aluminium extruded keel for channelled wood works provided by Armstrong over the lowest and second aluminium section at an on centre distane of 600mm. Place the inside clip on the groove end of ht epanel along the aluminium keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into groove of the earlier inserted panel and progeressively installing inside clips into the next keel till the actual height in achieved. Finish off the edges using wooden moulding of matching colour (provided by others) Installation to be carried out by Armstrong Trained Installation Team and installation should be carried out as per Armstrong Recommended Procedure.
1770
-
-
... More
Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both directions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevicol and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete.
660
-
-
... More
Supplying and fixing Lacquered glass Panelling of approved shade. Glass to be non toughened 6mm thick glass mounted on backing ply of appropriate thickness with neccessary frames of required size.Glass to be fixed with neutral silicon adhesive of adequate bond strength, to laminated strips affixed to the backing ply. Glass to be finished with edge treatments as per full height glazed partition. The rate is inclusive of laying, conveyane, all other Tools and Plants involved in the work charges and all other incidental charges etc.,The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
335
-
-
... More
Supplying and Fixing customized special type of Wall Panelling using plywood with charcoal laminates of dust proof with neccessary frames of required size.Fixing moisture resistant Flexi plywood of 9mm thick over the wall with necessary power driven anticorrosive metal screws. Charcoal finish laminated sheet of 3 to 3.5mm thick should be fixed without any air voids over the plywood using water resistant adhesives. The rate is inclusive of cost of all materials, Labour charge for fixing, conveyance of material to site, Tools and Plants, scaffolding charges involved in the works, Power consumption charges and all other incidental charges etc., Complete complying with standard specification and as directed by the departmental officers. Since this is special nature of work the required quantity of wastage also included in the rate. (The material quality, brand, colour, shade and shape should be got approved by the Engineer in charge and competent authority before use on works).
1180
-
-
... More
Supplying and Fixing customized special type of Wall Panelling using plywood based veneer sheet with Fire retardant melamine polishing with following specification. The frame using country wood (salwood) section of size 35mmx35mm fixed horizontally and vertically in position with wall at interval of 600mmx600mm C/C in both directions, fixing moisture resistant plywood of 12mm thick over the country wood (salwood) frame work with necessary power driven anticorrosive metal screws. Plywood based Veneer sheet of 3.5mm thick should be fixed without any air voids over the plywood using water resistant adhesive and finished with two coats of Fire retardant melamine polishing. The rate is inclusive of cost of all materials, Labour charge for fixing, conveyance of material to site, Tools and Plants, scaffolding charges involved in the works, Power consumption charges and all other incidental charges etc., Complete complying with standard specification and as directed by the departmental officers. Since this is special nature of work the required quantity of wastage also included in the rate. (The material quality, brand, colour, shade and shape should be got approved by the Engineer in charge and competent authority before use on works). (Special Work)
3010
-
-
... More
Supplying & Installing Sunscreen perforated Roller blind optima series - Basket 125 Tex with fabric specification of - ( Fabric compositition polyster 22 % and PVC 78 % , Openenss Factor - 5%, Thickness - 0.68MM +/- 5%, weight per m2 -480.00gsm, yarns count in wrap/weft/cm 19/18 +/-5%, Fire Resistance-FR(USA)KFI(Korea), Tear Resistance-wrap11.9 daN+/-5%,WEFT 150 daN+/-5%,colour fastness-6-7/8 ( white colour base),artificial light xenon lamp , UV resistance Min 3(White colour base),width 2.5M & 3 M The Roller mechanism shall be a moulded unit made from engineering grade plastic polymer with PVC spring support. The Fabric shall be attached to the roller tube with high quality self adhesive tape with manual operation . The fabric shall be attached to the tube with adhesive strip. It should have minimum one ton fabric which must be placed on the roller before the working section of fabric start.Operational action shall be smooth including necessary hardware for fixing at all places & as directed by Engineer-in-charge etc complete- The rate is inclusive of laying, conveyance, all other Tools and Plants involved in the work charges and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
1685
-
-
... More
Supplying and Fixing of WPC BOARD PARTITIONS CNC cut WPC panels of 25mm thick with 75 x 50mm wooden frames finished in Mettalic Duco paint to be fixed to the floor and ceiling .The rate is inclusive of laying, conveyance, all other Tools and Plants involved in the work charges and all other incidential charges etc.,The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidential charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
470
-
-
... More
Supplying & fabricating MDF JALI WORK PANELLING like DUCO FINISHED Jali work Partition made of 25 mm MDF panel with teak wood external lipping finished in Mettalic like Duco paint to be fixed to the floor and ceiling .,complete as per the detailed drawing . Cost also to include Design and Lazer Cutting on the MDF , and MS supports above False ceiling up to true ceiling.,The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
880
-
-
... More
Supplying & fixing WALLPAPER of 2mm thick Approved Shade / Finish/ textured Wall Paper on wall / partition As per detailed Drawing/ Elevation. Rate includes sanding, scrubbing, making the receiving surface smooth of imperfections so as to receive the wall paper.etc complete.The rate is inclusive of laying, conveyance, all other Tools and Plants involved in the work charges and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
380
-
-
... More
Fabricating, supplying and fixing in position GLASS FINS SUPPORTED GLAZING to external faces of the building fixed in straight/slope/curvilinear profile consisting of (Clear toughened float glass 10mm+1.5 mm PVB layer+10mm clear toughened float glass)with CNC pre-drilled holes glazed panels of approved make and size securely bonded with Stainless Steel 304 plates alloy electropolished, of approved make, fixed with articulated flat headed bolts for holding the adjoining glass panels in combination with toughened laminated fins (Clear toughened float glass 10mm+1.5 mm PVB layer+10mm clear toughened float glass) as per design requirement for support. The glass fins shall be properly edge polished with CNC pre-drilled holes and fixed perpendicular to the Facade plane at the junction of joints in glazing rigidly fixed at floor and ceiling using chemical grouting material, with necessary Stainless steel end connector to the shape with all adequate sealant to ensure absolute water tightness, necessary peripheral frame members fixed with suitable angles, brackets, fasteners, etc. as per the manufacturer's detail and approved by the Architects. The dawn glass of AIS may be used for the same.The rate is inclusive of laying, conveyance, all other Tools and Plants involved in the work charges and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
280
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-inCharge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
99200
-
-
... More
supplying and fixing in position Aluminium Fin (Bull Nose Cap of size 150 mm) : Designing, providing & fixing the Aluminium SDF finish of approved colour & finish (as per the drawing) metal Fin as per size & type given below with approved profile thickness not less than 2mm thick. Thickness of coating shall be not less than 40 microns. Aluminium fin to be fixed in to the glazing mullion by using aluminium extruded SDF finished bracket (Thickness of bracket not less than 6.0mm) with SS fasteners, bolts & nuts & sealant and as per drawing. Rate shall include the cost of all materials, accessories etc complete. Rate shall exclude the cost of glazing system which will be measured under the respective item. System to be designed to with stand design wind pressure of 230 Kg/Sqm confirming to IS 875 part 3 and other load parameters.The rate is inclusive of laying, conveyance, all other Tools and Plants involved in the work charges and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
2500
-
-
... More
Providing, assembling and Supplying of Double Glazed Performance glass, heat Strengthened clear Glass (IGUs) of size and shape as required and specified of approved, comprising of an outer heat strengthened clear glass of following thick of approved colour and shade with reflective soft coating on surface #2 and an inner heat strengthened clear glass of following thick , spacer tube 12mm wide , dessicants, including primary seal and secondary seal ( structural silicon sealant ) etc. all complete for the required performance
, as directed by the engineer -in - charge. The heat strengthened clear glass having properties as visible Light transmittance (VLT) of 25 to 35 %, Solar heat gain coefficient less than or equal to 0.27 and U value of 3.0 to 3.3 W/m2 or lower degree K etc. The IGUs shall be assembled in the factory/ workshop of the glass processor. For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm_8mm+12mm+8mm.The rate is inclusive of material, conveyance, all other Tools and Plants involved in the work charges and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
4960
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.......The rate is inclusive of material, conveyance, all other Tools and Plants involved in the work charges and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
4960
-
-
... More
Supplying and painting the walls with Texture Finish Paint as instructed by the departmental officers including labour charges ,preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the Texture Finish paint shall be got approved by the Executive Engineer before use of work).
2129
-
-
... More
Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of
6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25
+ 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer.
360
-
-
... More
Supplying and fixing frameless fully Glazed Partition with glass door with SS spiders fittings as per requirements with glass door as per requirements with the following specification:The partition and door is made of saint gobain/ Asahi (or) equivalent make glass 12 mm thick clear toughened glass with floor spring of heavy duty , patch fittings, lock patch,door is endorsed with stainless steel pull handles, door stopper, SS spider fittings and etc.., and the partition is attached to the existing masonry or concrete structures with 995 weather sealent and other accessories etc.The rate is inclusive of laying, conveyance, all other Tools and Plants involved in the work charges and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
1700
-
-
... More
Supplying and laying of Interlocking Paver Block Stone 83mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,
5280
-
-
... More
Supplying, laying and jointing '300mm dia RCC Hume Pipe etc., complete complying with standard specifications. The RCC Hume Pipe shall be got approved by Executive Engineer before use on works.
240
-
-
... More
Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. External Water Supply Arrangements (Above Ground Level)
-
-
-
... More
32 mm dia UPVC Pipe
90
-
-
... More
Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. External Water Supply Arrangements (Below Ground Level)
-
-
-
... More
50 mm dia UPVC Pipe
1110
-
-
... More
32 mm dia UPVC Pipe
350
-
-
... More
Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Internal Water Supply Arrangements (Above Ground Level)
-
-
-
... More
50 mm dia UPVC Pipe
822
-
-
... More
32 mm dia UPVC Pipe
415
-
-
... More
25 mm dia UPVC Pipe
3295
-
-
... More
20 mm dia UPVC Pipe
807
-
-
... More
Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
-
-
-
... More
50mm UPVC Elbow
100
-
-
... More
32mm UPVC Elbow
87
-
-
... More
25mm UPVC Elbow
106
-
-
... More
20mm UPVC Elbow
88
-
-
... More
50mm UPVC Tee
65
-
-
... More
32mm UPVC Tee
97
-
-
... More
25mm UPVC Tee
80
-
-
... More
20mm UPVC Tee
98
-
-
... More
50mm UPVC Coupler
250
-
-
... More
32mm UPVC Coupler
82
-
-
... More
25mm UPVC Coupler
175
-
-
... More
20mm UPVC Coupler
78
-
-
... More
50mm UPVC Union
80
-
-
... More
32mm UPVC Union
102
-
-
... More
25mm UPVC Union
115
-
-
... More
20mm UPVC Union
98
-
-
... More
Supplying and fixing in position first quality and approved variety of Gun Metal Gate valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications [for both internal and external water supply arrangements]. The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
... More
50mm dia Gun Metal Gate valve
30
-
-
... More
32mm dia Gun Metal Gate valve
30
-
-
... More
Supplying and fixing in position first quality and approved variety of Brass ball valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications [for both internal and external water supply arrangements]. The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
... More
20 mm dia Brass ball valve
10
-
-
... More
25mm dia Brass ball valve
10
-
-
... More
32 mm dia Brass ball valve
9
-
-
... More
50 mm dia Brass ball valve
50
-
-
... More
Supplying fixing,testing and commissioning of approved make of PN 16 range Brass Diaphragm Pressure reducing valve,with pressure gauge and syphonic cock etc.,complete complying with standard specfication and as directed by the departmental officer.
-
-
-
... More
32 mm dia pressure reducing valve
15
-
-
... More
50 mm dia pressure reducing valve
10
-
-
... More
Supplying and fixing of approved make 25mm dia Gun metal spring loaded Brass Air release valve to release airlock in water pipe line, including conveyance, all incidental charges, cost of materials , labour charges etc., completed etc., complete The valves to be used on work shall be got approved by the Executive Engineer before use on work. Make: Kartar / Kirloskar Equivalent.complete complying with standard specfication and as directed by the departmental officer.
55
-
-
... More
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) Nahani Trap of size 100 x 75mm with stainless steel gratings
290
-
-
... More
Construction of INSPECTION CHAMBER following clear sizes 0.60m X 0.60m including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five Crushed stone sand ] using best quality of Fly Ash Bricks of size 23x11x7cm with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Crushed stone and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.
120
-
-
... More
Supplying and fixing in position best quality PVC SOIL / WASTE PIPES of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry. RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. [The PVC pipes should be got approved by the Executive Engineer before use on works]. The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level.
-
-
-
... More
160 mm dia PVC soil / waste pipe
1250
-
-
... More
110 mm dia PVC soil / waste pipe
1360
-
-
... More
75 mm dia PVC soil / waste pipe
1990
-
-
... More
Supplying and fixing in position best approved of BIS quality of PVC RAIN WATER DOWN FALL PIPES having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
-
-
-
... More
160 mm dia (One Floor)
12
-
-
... More
160 mm dia (Seventh Floor)
700
-
-
... More
110 mm dia (One Floor)
99.5
-
-
... More
Supplying and fixing in position PVC SPECIALS of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. [The PVC specials should be got approved by the Executive Engineer before use on works].
-
-
-
... More
75 mm dia ELBOW
50
-
-
... More
110 mm dia ELBOW
25
-
-
... More
75 mm dia ELBOW WITH DOOR
30
-
-
... More
110 mm dia ELBOW WITH DOOR
20
-
-
... More
75 mm dia TEE WITH DOUBLE DOOR
35
-
-
... More
110 mm dia TEE WITH DOUBLE DOOR
35
-
-
... More
75 mm dia Bend
25
-
-
... More
110mm dia Bend
65
-
-
... More
75 mm dia Y WITH DOUBLE DOOR
50
-
-
... More
110 mm dia Y WITH DOUBLE DOOR
50
-
-
... More
75 mm dia Vent Cowl
10
-
-
... More
110 m dia Vent Cowl
10
-
-
... More
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)-White.
24
-
-
... More
Supplying , fixing, testing and commissioning of white vitreous china glazed floor mounted inbuilt cistern syphonic flush type european water closet of approved brand like KOHLER /JAGUAR OR EQUVALENT to the size of 650mm x 350mm x 410mm/800mm with cistern capacity of 8 to 10 liters with dual flush with soft close seat cover, CP brass hinges and rubber buffers,complete with supply of necessary fittings, supporting bolts /CI / MS brackets flushing pipe with fittings and clamps, overflow arrangement and angle cock of approved make and finish,together with cp conncetion pipe to the cistern etc., cutting and making good the walls and floors wherever required all complete as per specification and direction of the Engineer-in-Charge.
57
-
-
... More
Supplying and fixing in position one set of Sanitary wares of approved make like KOHLER /JAGUAR OR EQUVALENT for Physically challenged toilet inclusive of one no of white vitreous china glazed floor mounted inbuilt cistern dual flush syphonic flushing type european water closet, one no of white glazed wash hand basin, fixed type SS of 304 grade grab bars 2 no's of 825mm length and 32mm dia and SS of 304 grade railing 2 no's of 32mm dia for wash basin.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer
22
-
-
... More
supplying & fixing WHITE VITREOUS CHINA FLAT BACK LARGE URINAL SENSOR AUTOMATIC flushing cistern KOHLER /JAGUAR OR EQUVALENT with necessary fittings as per IS code.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).
76
-
-
... More
Supplying , fixing, testing and commissioning of White color Oval / rectangular Wash basin counter top type KOHLER /JAGUAR OR EQUVALENT with 32mm dia CP waste coupling, trap,with necessary fittings and support to the basin, 15mm CP angle valve with CP inlet connection tube , CP wall flange, including necessary brackets etc., complete.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer.
90
-
-
... More
Supplying and fixing in position 15mm dia SS Heavy Duty Swan neck Tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
90
-
-
... More
Supplying and fixing SS Double Coat hook fixing with necessary screws, fixers of standard size of approved quality etc., complete complying with standard specfication and as directed by the departmental officer.
90
-
-
... More
Supplying and fixing in position Stainless Steel Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, cutting and threading wherever necessary. etc., complete complying with standard specification and as directed by the departmental officer.
103
-
-
... More
Supplying and installing SS toilet paper holder fixed with SS screws, fixers of standard size of approved quality etc., complete complying with standard specfication and as directed by the departmental officer.
103
-
-
... More
supplying and fixing wall mounted soap dish holder (single holder) of approved make like KOHLER OR EQUVALENT.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.
90
-
-
... More
Supply and fixing of liquid hand wash dispenser which is automatic sensor operated, wall mounted, rust proof, SS with GPSP powder coated , enhanced motor power offer more stable quantity of produced liquid etc., complete complying with standard specfication and as directed by the departmental officer.
90
-
-
... More
supplying and fixing stainless steel 304 grade of Towel Rack of size 600mm long , 150mm width and 240mm depth with lower hanger and multi purpose hooks.complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arangement of approved quality colour and make etc., The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.
90
-
-
... More
Providing and fixing SS Towel ring complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arangement of approved quality colour and make etc., complete complying with standard specfication and as directed by the departmental officer.
90
-
-
... More
Supplying and fixing in position 15mm dia SS Heavy Duty Long Body Tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
103
-
-
... More
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
90
-
-
... More
Supplying and fixing of SS Sink of size 1200x550x180mm etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.
4
-
-
... More
Supplying and fixing heavy duty FRP manhole frame and cover with the load carring capacity of 25 TONNES of clear opening size 600 x 600 mm including necessar fitting as per manufacturer requirement etc. Simtex/Asian plast or Equivalent.complete complying with standard specfication and as directed by the departmental officer.
171
-
-
... More
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
-
-
-
... More
75mm thick slab
820
-
-
... More
DRILLING 150mm dia [6"] Vertical bore using power drill in hard rock to any required depth as directed by the departmental officers to the require depth assembly in drilled hole including welding the joint if necessary, grouting the casing pipe etc., and including transportation charges for the rig and support vehicle.
Borewell 1 & 2
-
-
-
... More
Borewell upto 150m below GL
744
-
-
... More
From 151m upto 180m
120
-
-
... More
From 181m upto 210m
120
-
-
... More
Supplying and fixing of PVC CASING PIPE 160mm dia suitable for 6" Borewell conforming to I.S. 12818 - 1992 with screwed and socked and centering guides for every 15m interval etc., as directed by the departmental officers.
240
-
-
... More
Supplying and fixing 3HP submersible motor including ISI make for 6" dia bore well with pump, necessary accessories.The motor shall be of ISI approved variety and shall be got approved by Executive Engineer before use on work.
6
-
-
... More
Labour charges for inserting casing pipes assembly (With slot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer
96
-
-
... More
Supplying and fixing M.S. fabricated wall mounting PANEL BOARD with necessary accesaries etc., complete complying with standard specification.
6
-
-
... More
Supplying of best and approved quality of HDPE pipe of 40mm dia including laying in the basement and tying with copper wire etc., complete complying with standard specification.
1000
-
-
... More
Supplying and fixing of Nylon rope for submersible motor of approved quality in etc,complete complying with standard specifications.
860
-
-
... More
Supply and run off WATER PROOF 3 CORE 4 sq.mm flat PVC insulated copper cable for submersible pumpset in the borewell including fixing and tying with copper wire and clamping water pipe etc., complete as directed by the departmental officers.
1020
-
-
... More
Supplying and erecting in position of following 2000 liters
capacity Industrial Model Reverse Osmosis Water-cum-
Purifier to deliver Potable Water with World Health
Organisation (WHO) Standards with following
accessories.
(a) MS Skid - 1 No.
(b) Media 11054 No. Vessel with 20 nb Multiport
Valve (with Media Pubble and Fine Sand and
Activated Carbon Filling) set
(c) Feed Pump 0.50 HP – 1 No.
(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.
(e) Membrane 40 x 40 filmtech (or) equilaents /
Osmonic (USA) - 1 No. and Membrane Pressure
Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.
(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.
Low Pressure Switch - 1 No.,
Level Switch - 1 No. &
Necessary CPVC Pipes and Fittings.
The system shall be provide with Two Panel Control
System with necessary Stainless Valves and Fittings
and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the
System in position and intact
3
-
-
... More
Supply, Fixing and Commissioning of : 60 LPH RO Water Purifier with Normal, Hot & Cold Water Dispenser Unit
Technical specification water purifier and Dispenser.
1. Water Purifier: Inbuild RO System:
Reverse Osmosis System water Purifier five stage Water Purifier System. Sediment Filter 1 no and Pre Carbon Filter-1no,Post Carbon filter 1 no, 1 Micron UF Filter 1 no, 24v DC SMPS Power Supply, Fully Automatic RO water Purifier Inbuild Unit.
2. Water Dispenser Normal, Hot & Cold Water 60 Liter Capacity:
Stainless steel [SS 304] grade water Dispenser unit, Three Output Tap’s,
Automatic refilling storage, Normal, Hot & Cold Water Dispenser 20 Liter Normal
Water, 20 Liter Hot Water,20 Liter cold Water, 750W Coold Water Power Supply,
And Moc Hot Water Tank SS 304, Compressor- Immersion,
MOC Normal Water Tank- LLDPE
MOC Faucets , Brass- Chromium Plated,
Power Supply- 230v/50Hz, Power In Water Heater 750 w
32
-
-
... More
Supplying and fixing of 1000 litre capacity PVC water tank with ISI Monogram and Quality as per standard specifications and as directed by the departmental officers. Rate inclusive of transportation, fixing and testing etc., (Water tank should be got approved by the Executive Engineer before use on works)
4
-
-
... More
Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.
245
-
-
... More
Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts or best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc.,in a complete form using coir and nails 1m run.etc., complete as directed by the departmental officers.
247
-
-
... More
Providing Additional two legged scaffolding over 3m etc., complete as directed by the departmental officers..
8135
-
-
... More
Supplying and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table 'E' bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
26
-
-
... More
Supplying installation of Fire fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20 mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doiing the dismantled portions to its original condition wherever found necessary., etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
16
-
-
... More
Supplying and fixing in position of Fire fighting Application Hose of 63mm dia of 15 metres length binded by coppper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
52
-
-
... More
Supplying and fixing in position of Fire fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
26
-
-
... More
Supply of Fire fighting Application MS Hose Box to keep two number of hoses and 1 no. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
26
-
-
... More
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe ling using suitable size MS threaded coupling, thread, shellac etc., as per standard mehtods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT
4300
-
-
... More
Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling, Pipe shall be 16 bar pressure rating and 1500mm long, 25mm dia with union/reducer, collar, clamps, etc. It shall have UL listed and FM approved.
2100
-
-
... More
Supply, erection, testing and commissioning of following MS 'C' Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10kg /sq.cm including necessary fittings like MS flange of table 'E' elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat of metal primer and two coat of Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL/ EQUIVALENT.
-
-
-
... More
250 mm dia
218
-
-
... More
200 mm dia
218
-
-
... More
150 mm dia
1800
-
-
... More
100 mm dia
400
-
-
... More
80 mm dia
400
-
-
... More
65 mm dia
250
-
-
... More
50 mm dia
1200
-
-
... More
40 mm dia
1800
-
-
... More
25 mm dia
2400
-
-
... More
Wrapping and Coating Anti-Corrosive Treatment for the following under ground MS pipe having one coat of anti-corrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
150 mm dia
300
-
-
... More
Supply, erection, testing and commissioning of following sizes 'Y' Strainer
-
-
-
... More
200 mm dia
3
-
-
... More
80 mm dia
2
-
-
... More
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table 'E' gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT.
-
-
-
... More
200 mm dia
5
-
-
... More
150 mm dia
20
-
-
... More
100 mm dia
5
-
-
... More
80 mm dia
2
-
-
... More
65 mm dia
2
-
-
... More
Supply, erection, testing and commissioning of Cast iron and Gun metal or stainless steel internal Non return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table 'E' gaskets, bolts & nuts etc., as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
200 mm dia
1
-
-
... More
150 mm dia
2
-
-
... More
Supply, erection, testing and commissioning of Gun metal Gate Valve of size 50mm dia size including necessary MS flange of table 'E' gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.
-
-
-
... More
50 mm dia
5
-
-
... More
Supply and laying of following size of Armoured Aluminium / Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB /PARACON / FINOLEX /EQUIVALENT.
-
-
-
... More
3 cores 185sqmm armoured aluminium cable (Pump Room)
80
-
-
... More
3 core 10 sqmm armoured copper cable (Pump Room)
80
-
-
... More
10 core 2.5 sqmm armoured copper cable (Pump Room)
80
-
-
... More
Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specifcation and as directed by the Departmental Officers.
10
-
-
... More
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14kg. Range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe ling in pump house to read the developing pressure including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: H-GURU / ISI MAKE / EQUIVALENT.
5
-
-
... More
Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT.
5
-
-
... More
Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415 volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings. A.Coomon Panel in Fire Pump House (i) Incomer a. 1 No. 600A TP & N SDFU with HRC fuses
b. 1 set of 600 A, 4 bar aluminium bus bar, 415V, 50 |Hz AC supply c. 1 No. (0-500A) digital ammeter with selector switch & CTs d. 1 No. (0-500V) digital voltmeter with selector switch and control fuses e. 3 Nos. phase indication lamp LED type with toggle switches with control fuses. (ii) Outgoing a. Main Fire Pump
400 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection , digital ammeter with built- in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operaton, selector switch for auto/ manual / OFF operation - 1 No......
1
-
-
... More
b. Jockey Pump 125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter/ delta starter with over load protection, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic opertion, selector switch for auto / manual operation - 1 No.
c. Diesel Engine Control comprising of :
1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start / stop in manual mode.
2. Indication lamp for high/ low lubircant oil pressure, high water termperature and engine ON indication. 3. Battery charger suitable for 12V/ 24 V DC with boost and tickle selector switch, 0-15V/0-30V DC volt meter, 0-20A DC ammeter
4. All standard relays and accessories for automatic operation of diesel engine.
5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specifiction and as directed by the Departmental Officers.
-
-
-
... More
Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump rated for 2850 LPM at 70 metres head with Electrical Motor of 60 HPO of 415 volt, 3 phase connection complete with base plate and accessories . (Make :Kirloskar or Equivalent) The rate inclusive of necessary vibration, bed mounting, etc., as per standard specifications and as directed by the Departmental Officers.
2
-
-
... More
Supply, Installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of followings complete in all respects as required.
a.1No. Horizontal split casing centrifugal type fire pump cable of delivering 2850 LPM against a total head of 70 metres, so as to ensure a minimum pressure of 3.5 kg per sq.cm at the farthest top most hydrant /outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring, etc., of non-corrosive metal either like bronze, brass or gun metal and saft of stainless steel.
b.68 BHP, 1500 RPM water cooled with radiator, diesal engine conforming to relevant BS & IS standard complete.
c.Auto starting mechanism, 12 volts /24 volts electric starting equipment llike self motor, dynamo, solenoid switches etc., d.110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc....... e.Exhaust system having flexible metallic mufler, 100mm dia MS heavy pipe extended upto 1m outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from wall or ceiling as per site condition. f. Dash board consisting of the instruments like Temperature Gauge, Galvano Type DC Ammeter, Lubricant Oill Pressure Gauge, Ignition Switch, Emergency Stop and all other pretection equipments as per specification, stop soleneid for auto stop in the event of fault with audio indications, painted with Post Office Red Colour etc., as required.
g.12V.24V, storage battery, maintenance free tape, 180AH rating, MS fabricated common base plate, coupling guard, foundation bolts, etc., as required.
h.Positioning the Diesel Engine Driven Fire Pump over cement concrete foundation using suitable size anti vibration mounting arrangements.
The works including conveying, fixing and incidental charges, etc., completed as per standard specification and as directed by the Departmental Officers. (Make: KIRLOSKAR/EQUIVALENT).
1
-
-
... More
Supply erection, testing and commissioning of 180 LPM, 70 metres, Head Pressurization Pump with 10 HP electrical motor of Kirloskar make with suitable base frame incluidng necessary vibration bed mounting etc., including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. Make : KIRLOSKAR / EQUIVALENT.
2
-
-
... More
Supply , erection testing and commissioning of Fire Fighting 4 Way Fire Brigade inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX / EQUIVALENT.
4
-
-
... More
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR/ EQUIVALENT.
2
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST ? EQUIVALENT
90
-
-
... More
Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST ? EQUIVALENT.
90
-
-
... More
Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers.
20
-
-
... More
Supplying and installing of approved type Rosette Plates (Recessed Type in Two Pieces) for sprinklers below false ceiling area. The Rosette shall be fabricated by MS plate of 2mm thick and the finish shall be powder coated and colour, as directed by the Departmental Officers.
1488
-
-
... More
Supply, erection testing and commissioning of following sizes of Heavy Duty Foot Valve including all accessories, such as MS flange of table 'E' gaskets, bolts & nuts etc., installed at end of 150/200mm dia suction pipe line at sump i including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT.
-
-
-
... More
200 mm dia
24
-
-
... More
100 mm dia
24
-
-
... More
Supply, erection, testing and commissioning of Cast iron and Gun metal or stainless steel internal Non return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table 'E' gaskets, bolts & nuts etc., as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
100 mm dia
8
-
-
... More
Supply, erection, testing and commissioning of Gun Metal Non - Return Valve of size 50mm dia including necessary MS flange of table 'E' gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveyance, fixing and incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER/EQUIVALENT.
8
-
-
... More
Priming Tank mounted with the supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room, as directed by the Departmental Officers.
2
-
-
... More
Supply, erection, testing and commissioning of Fire fighting Electrical Control Panel of 15 HP, 415V, 50 HZ Rating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions:
a. 63Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set
b. R, Y, B Phase Indication Lamp, Volt Meter (0-500) V), Ammeter (0-50 A), Volt Meter Selector Switch - 1 set
c. 32 Amps Power Contactor with 230 V Coil, 14 - 23 Amps Over Load Relay - 1 set
d. Single Phase Preventer - 1 No.
e.Indication Lamp for Motor ON/OFF/TRIP - 1 set
f. AUTO / MANUAL Selector Switch, ON/OFF Push Button - 1 set.
g. Add on Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover.
The above panel mounted on wall using anchor fasterners bolts, plugs, incoming and outgoing cable connection and all works carried out as per standard methods and as directed by the Departmental Officers,
1
-
-
... More
Supply, erection, testing and commissioning of fire fighting application Monoblock Motor Pumpset of 900 LPM at 40 metres head to develop 3.5kg / sq.cm at the heighest and farthest hydrant point to make 30m water jet at the time of fire fighting emergency circumstances, coupled with 15KW / 20HP rated three phase 414 volts, 50 HZ, 2880 rpm electrical motor the pump with cast iron body, bronze impeller, rope gland packaging, suction size of 100mm dia, delivery size of 80 mm dia, including the cost of foundation concrete, anti-vibration mounting, rain safety hood and etc., complete as directed by the Departmental Officers. (Make: Kirloskar KDS 2050 + or Equivalent)
1
-
-
... More
Providing, fixing pipe supports from coloumns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
-
-
-
... More
100mm dia
200
-
-
... More
80mm dia
650
-
-
... More
50mm dia
1050
-
-
... More
Supply and fixing of Addressable Fire Alarm Control Panel consists of display board which will have 160 Character Display with Touch key pad, Mother board 32 Bit Processor, In-built RS-485 Networking Circuit for peer to peer networking, In-built USB 2.0 Port, Loop Card having 254 devices of both detectors and modules in a single line circuit, SLC supports both Class A and Class B wiring Approval: UL Listed etc. complete complying with standard specification and as directed by the departmental officers.
1
-
-
... More
Supply and fixing of Addressable Active Repeater Panel consists of display board having 160 Character Display with Touch key pad, Mother board which will have 64 Bit Processor, Inbuilt S-485 Networking Circuit for peer to peer networking etc. complete complying with standard specification and as directed by the departmental officers.
1
-
-
... More
Supply and fixing of Addressable Detectors with base with Binary coded address setting. Dual LED’s for 360° visibility etc. complete complying with standard specification and as directed by the departmental officers.
200
-
-
... More
Supply, Installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS junction box / false ceiling using fixing accessories llike screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers, (Make: Apollo / Equivalent)
30
-
-
... More
Supply and fixing of Addressable Manual Call Point - Resettable type - with back box with Binary coded address setting with Status LED for 360° visibility complete complying with standard specification and as directed by the departmental officers.
50
-
-
... More
Supply and fixing of Conventional Manual Pull Station - Single Action complete complying with standard specification and as directed by the departmental officers.
50
-
-
... More
Supply and fixing of Conventional type Horn / Strobe wall mounted type rated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication complete complying with standard specification and as directed by the departmental officers.
50
-
-
... More
Supply and fixing of Conventional type Horn wall mounted type rated at 100dBA @ 1m for Audible annunciation complete complying with standard specification and as directed by the departmental officers.
50
-
-
... More
Supply and fixing of Fault Isolator Module capable of monitoring shorted loop circuit and automatically restore communications complete complying with standard specification and as directed by the departmental officers.
110
-
-
... More
Supply and fixing of Response indicator for all detectors located above false ceiling complete complying with standard specification and as directed by the departmental officers.
250
-
-
... More
Supply and fixing of 24VDC Power Supply with 5 amp rating, having LED indications for Power supply ON,battery Fail,Battery Charging,battery back up etc. complete complying with standard specification and as directed by the departmental officers.
3
-
-
... More
Supply, Installing, Testing and commissioning of bar screen
MOC: MSEP, 20 mm spacing. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning of oil skimmer Type: Single Belt, Capacity: 10 LPH, MOC: MSEP, belt type
The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning Raw sewage Transfer Pump centrifugal type. The pumps shall be coupled to the adequate HP, electric motor, discharge butterfly valves, non return valves, Pressure Gauges as per technical specification. The pumps shall be 2 Nos (1 No working + 1 No standby) Duty: To transfer sewage to aeration tank, Type: Horizontal, Centrifugal Non Clog
Flow: 1.25 m3/hr, Head: 15 mwc, MOC: CI, Motor: Suitable HP, Solids handling: 20 to 30 mm
The rate inclusive of cost of all materials,transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
2
-
-
... More
Supply, Installing, Testing and commissioning Coarse Pore Diffuser of suitable size of UPVC pipe grid with necessary orifices UPVC pipe of 6.0 KG/cm2 pressure rating with removable deflector to provide clog free air for Equalization tank MOC: MS/UPVC. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning of twin lobe design type air blower complete with motors of capacity 45 m3/hr @ 4 mtr head (1 No Working + 1 No Standby), cast iron material, discharge valves, including pressure gauge, interconnection piping, discharge silencer, antivibration pads, Pressure gauges etc. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
2
-
-
... More
Supply, Installing, Testing and commissioning fine bubble diffuser of suitable size for aeration tank. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning MBBR Media. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning of secondary settler PVC tube sheet. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning Sludge Recirculation/Return Sludge Transfer Pumps. The pumps shall be coupled to the adequate HP, electric motor, discharge butterfly valves, non return valves as per technical specification (1 No working + 1 No stand by) Duty: To transfer sludge to sludge drying beds Type: Horizontal, Centrifugal Non Clog Flow: 1 m3/hr, Head: 15 m, MOC: CI, Motor: Suitable HP, Solids handling: 20 to 30 mm. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
2
-
-
... More
Supply, Installing, Testing and commissioning of Sodium Hypo Chlorite Dosing System. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning filter feed pumps. The pumps shall be coupled to the adequate HP, electric motor, discharge butterfly valves, non return valves, pressure gauges as per technical specification (1 No working + 1 No stand by) Duty: To transfer water to filters,
Type: Horizontal, Monoblock, Flow: 1.25 m3/hr, Head: 30 mwc, MOC: CI, Motor: Suitable HP The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
2
-
-
... More
Supply, Installing, Testing and commissioning of Pressure sand filter 16" dia x 65" HOS, FRP material, frontal piping, Multiport valves, pressure guage, gasket, flanges. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers
1
-
-
... More
Supply, Installing, Testing and commissioning of Activated carbon filter 16" dia x 65" HOS, FRP material, frontal piping, multiport valves, pressure guage, gasket, flanges. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning Treated Water Transfer pumps. The pumps shall be coupled to the adequate HP, electric motor, discharge butterfly valves, non return valves, Pressure gauges as per technical specification (1 No working + 1 No stand by) Duty : To transfer water from Treated Water Tank Type : Horizontal, Monoblock, Flow : 1.25 m3/hr, Head : 30 mwc, MOC: CI, Motor: Suitable HP
The rate inclusive of cost of all materials,transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
2
-
-
... More
Supply, Installing, Testing and commissioning of Inter connected piping UPVC sch 80 for water line for raw sewage line, sludge line, filter water line, treated water line and MS C class for air line for Equalization tank and aeration tank. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning of LT panel required contactor, OLR, START/STOP/TRIP switch, MCB, armoured or flexible cabling, PVC cable conduit pipe and its supports. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installation, Testing and Commissioning of Electro Magnetic Flow Meter. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
2
-
-
... More
Supply, Installing, Testing and commissioning of MSFRP tank for aeration tank,along with nozzles, drain flange, partition plates, handrails and platforms. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning of MSFRP tank for settling tank, along with nozzles, drain flange, partition plates, handrails and platforms. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning of MSFRP tank for Filter Feed tank, along with nozzles, drain flange, partition plates, handrails and platforms. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply, Installing, Testing and commissioning of MSFRP tank for treated water tank along with nozzles, drain flange, partition plates, handrails and platforms. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Supply of Commissioning Chemicals. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc., complete and as directed by the departmental officers.
1
-
-
... More
Fabrication, supply and fixing in position of 'N' type ventilators using M.S. angle of size 25 x 25 x5 mm for frame and M.S. Flat of size 20 x 3 mm for fixing the weld mesh and using 25 x 22 x3 mm 'T' section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary clips & putties with required bolts, nuts and washers and one coat of red oxide primer etc. including necessary dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extend required and made good to the original conditions after fising as directed by the departmental officers.
4
-
-
... More
Supplying and planting of healthy well grown tree sapling, special effect/accent plant in 12'' bag size, Planted in the excavated pit of size 750mm x 750mm x 750mm with back filling using red earth or equivalent fertile soil, compost,bio-pesticides with proper staking and wrapping. Rate includes plant cost, soil mixtures, transport, supervision, maintenance of 12 months all complete.
-
-
-
... More
Terminalia mantaly- 2200mm
17
-
-
... More
Areca palm- 1700mm
42
-
-
... More
Plumeria acutifolia-1500mm
17
-
-
... More
Raphis excelsa- 450mm
65
-
-
... More
Supplying and planting of healthy well grown 0.45m in height shrubs in 6'' bag size, Planted in the excavated pit of size 450mm x 450mm x 450mm with back filling using red earth or equivalent fertile soil, compost,bio-pesticides with proper staking. Rate includes plant cost, soil mixtures, transport, supervision, maintenance of 12 months all complete.
-
-
-
... More
Pseuderanthemum reticulatum / Eranthemum 'yellow'
165
-
-
... More
Clerodendron inerme / Forest jamine
125
-
-
... More
Ceasalpinia pulcherrima-600mm
120
-
-
... More
Supplying and planting of healthy well grown 0.3 m in height ground covers in 6'' bag size, Planted in the excavated pit of size 300mm x 300mm x 300mm with back filling using red earth or equivalent fertile soil, compost,bio-pesticides with proper staking. Rate includes plant cost, soil mixtures, transport, supervision, maintenance of 12 months all complete.
-
-
-
... More
Lantana swellonia 'purple', 'white'
85
-
-
... More
Allamanda cathartica 'dwarf yellow'
125
-
-
... More
Rhoe discolor
125
-
-
... More
Golden daturanta
85
-
-
... More
Ixora sunkirt 'pink'
105
-
-
... More
Formation of mound or undulated surface for lawn by removing the soil upto 150mm depth, all the debris, stones, weed roots or any other material, Spreading and leveling of garden soil, red earth or equivalent soil, farm yard manure , and bio-fertilizers mixture to required depth including importing soil for formation of mound or undulated surface for lawn by rolling and grading the area. The rate is inclusive of all materials, labours, convyance and with all other incidental charges etc., complete complying with standard specfication and as directed by the departmental officer.
370
-
-
... More
Supplying and planting of well healthy Bermuda G2 lawn must be pure,free from weeds and dibbling the grass, watering, gapfilling, weeding, mowing, maintenance of 12 months.
1570
-
-
... More
Supply and fixing Sprinklers with riser and all fittings make: Rain Bird brand/Hunter or Equivalent, Medium range rotary popup -sprinkler with adjustable irrigation radius range of 8-10 M.
20
-
-
... More
Supply and fixing Sprinklers with riser and all fittings make: Rain Bird brand/Hunter or Equivalent ,Medium range rotary popup -sprinkler with adjustable irrigation radius range of 10-18 M.
16
-
-
... More
Supply and laying Integral LLDPE Drip lateral tubes with inline emitter 4-6 lph, class 2 of 16 mm dia with necessary fittings, accessories and etc., complete.
850
-
-
... More
Supply and fixing of PVC Quick coupling kit to suit 16mm LLDPE Drip tubes with necessary fittings, accessories and etc., complete.
16
-
-
... More
Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
10.4
-
-
... More
Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
8
-
-
... More
Supply, installation, testing and commissioning of 11kV, 630A, 25kA HT Outdoor Three Panel Ring Main
Gear complete 1) Vaccum Circuit Breaker:
a) Horizontal Draw Out type VCB fitted with Manual / Motor Operated spring charged mechanism with 230V AC Motor with Motor control switch, Mechanical ON / OFF indicator Operation Counter, Automatic safety shutters & push button - 11kV,630A 25kA/3Sec Incomer-2no, Outgoing-1nos.
b) Shunt trip coil - 110V DC
c) Closing coil - 110V DC
d) Spare auxillary contact - 6 NO + 6 NC
e) Antipumping Feature - 110V DC
f) Power Pack - 230V AC/110V DC - 1 no
2) Potential Transformer:- 3 sets
a) Single Phase, Resin cast, Dry type, Fixed type potential transformer with HT and LT HRC fuses and one no. Neutral Link - (11KV/√3) / (110V/√3)
b) Secondary 1: for meter - Cl-0.5, 100VA burden
3) Current Transformer: incomer -1 set, outgoing - 1 set
a) Single phase, Resin Cast, Dry Type Current Transformer 100-50/5-5Amps dual core
b) Core 1: for meter - Cl-0.5, 7.5VA burden
c) Core 2: for protection - Cl-5P10, 7.5VA burden
4) Metering :
a) Digital Ammeter with Inbuilt Selector Switch - Cl. 0.5 , Incomer - 1 no & Outgoing - 2 nos
b) Digital Voltmeter with Inbuilt Selector Switch - Cl. 0.5, Incomer - 1 no
c) 3Ф, 4 wire, 3 Element Digital MultiFunction Meter - CI. 0.5, Incomer - 1 no & Outgoing - 2 nos
d) Power factor Meter - CI. 0.5, Incomer - 1 no
e) Frequency Meter - CI. 0.5, Incomer - 1 no
1
-
-
... More
5) Protection :
a) Numerical Breaker Manager Relay MB 140C with 3 over current and 1 Earth Fault Protection relay provided with In-Built Master trip relay,Trip Circuit Supervision Relay,Anti Pumping Relay, DC supervision, Auxilary .Relay for Transformer protection,Annunciation unit,In-Built Breaker Control Push buttons,Local and Remote Push buttons, In-built LED Indications etc., - 5A,110V DC - (Incomer - 1, Outgoing - 2)
b) Buzzer -1No
6) Control wiring with appropriate colors
7) Busbar Ratings
a) Copper busbar with PVC sleeve - 11kV,630A, 25kA/3Sec b) Earth bus for panel
8) Common for switch gear :
a) Heater ON / OFF switch with filament type 100Watts space heater & thermostat , single phase switch with socket, 9W cubicle Lamp for panel illumination with snap type door limit switch, Fuses / MCBs for AC / DC conrol - Incomer - 1set, Outgoing - 2 set
9) Enclosure:
MS Sheet steel enclosure & installation suitable for Outdoor - IP54 (Incomer - 2set, Outgoing - 1set)
10) Termination : a) Incoming (Excluding Cable termination kits, lugs & glands)
b) Outgoing (Excluding Cable termination kits, lugs & glands)
11) Surge Protection
Surge Arrester - 9kV,10 kA - 3 nos
12) Mechanical Interlock & Key
a) Castell Interlock and key (2 Base + 1 Key) - (Incomer - 1set) etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply, installation, testing and commissioning of 11kV, 630A, 25KA OUTDOOR TYPE Single Panel Vaccum Circuit Breaker 1) Vaccum Circuit Breaker: (1 no)
a) 11KV, 25kA Horizontal Draw Out type VCB fitted with Manual / Motor Operated spring charged mechanism with 230V AC Motor & Motor Control Switch, Mechanical ON / OFF indicator Operation Counter, Automatic safety shutters & push button.
-1no (630A)
b) Shunt trip coil - 110V DC
c) Closing coil - 110V DC
d) Spare auxillary contact - 6 NO + 6 NC
e) Antipumping Feature - 110V DC
f) Power pack - 230VAC/110V DC
2) Potential Transformer: (1 no)
a) Single Phase, Resin cast, Dry type, Fixed type potential transformer with one set of HT and LT HRC fuses and one no. Neutral Link - (11KV/√3) / (110V/√3) - 3 nos
b) Secondary 1: for meter - Cl-0.2, 50VA burden
3) Current Transformer: a) Single phase, Resin Cast, Dry Type Current Transformer 100-50/5-5Amps dual core
Core 1: for meter - Cl-0.5, 7.5VA burden
Core 2: Accuracy class 5P10,7.5VA Burden for protection
4) Metering:
a) Digital Voltmeter with inbuilt selector switch CI. 0.5, 110V AC - 1 no
b) Digital Multifunction meter with Inbuilt Selector Switch CI.0.5 5A,110V AC (PT) & 110V AC Aux
c) Digital Trivector meter - 1 no
d) Digital powerfactor meter - 1 no
e) Digital Frequency meter - 1 no
1
-
-
... More
5) Protection: Numerical Breaker Manager Relay MB 140C with 3O/C+1E/F Protection relay provided with In-Built Master trip relay,Trip Circuit Supervision Relay,AntiPumping Relay,PT fuse failure relay,DC supervision,Auxillary Relay for Transformer protection,Annunciation unit,In-Built Breaker Control Push buttons,Local and Remote Push buttons,In-built LED Indications etc., - 5A/110V DC
6) Indication/Alarm:
Buzzer - 1 no
7) Control wiring with appropriate colors: a) Breaker Control Switch (Close-Neutral-Trip) - 110V/25A - 1 no
b) Test Terminal block - 1 no
8) Busbar:
a) Copper busbar with PVC sleeve - 11 kV,630A, 25kA/3Sec ( 1 set )
b) Earth bus - ( 1 set )
9) Common for switchgear :
Heater ON / OFF switch with filament type 80Watts space heater & thermostat , single phase switch with socket, Lamp for panel illumination with snap type door limit switch, Fuses / MCBs for AC / DC control - 1 set 10) Enclosure :
MS Sheet steel enclosure & installation suitable for Indoor - 1 set
11) Termination:
a) Incoming (Excluding cable termination kits, lugs and glands) - Bottom
b) Outgoing (Excluding cable termination kits, lugs and glands) - Bottom
12) Surge Protection: 9kV,10kA etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply, installation, testing and commissioning of 11kV, 630A, 25KA INDOOR TYPE Three Panel Vaccum Circuit Breaker
1) Vaccum Circuit Breaker: (3Nos) [Incoming -1No & Outgoing-2Nos]
a) 11KV, 25kA Horizontal Draw Out type VCB fitted with Manual / Motor Operated spring charged mechanism with 230V AC Motor & Motor Control Switch, Mechanical ON / OFF indicator Operation Counter, Automatic safety shutters & push button.
-1no (630A)
b) Shunt trip coil - 110V DC
c) Closing coil - 110V DC
d) Spare auxillary contact - 6 NO + 6 NC
e) Antipumping Feature - 110V DC
f) Power pack - 230VAC/110V DC
2) Potential Transformer: (1 no)
a) Single Phase, Resin cast, Dry type, Fixed type potential transformer with one set of HT and LT HRC fuses and one no. Neutral Link - (11KV/√3) / (110V/√3) - 3 nos
b) Secondary 1: for meter - Cl-0.2, 50VA burden
3) Current Transformer: a) Single phase, Resin Cast, Dry Type Current Transformer 100-50/5-5Amps dual core
Core 1: for meter - Cl-0.5, 7.5VA burden
Core 2: Accuracy class 5P10,7.5VA Burden for protection
4) Metering:
a) Digital Voltmeter with inbuilt selector switch CI. 0.5, 110V AC - 1 no
b) Digital Multifunction meter with Inbuilt Selector Switch CI.0.5 5A,110V AC (PT) & 110V AC Aux
c) Digital Trivector meter - 1 no
d) Digital powerfactor meter - 1 no
e) Digital Frequency meter - 1 no
1
-
-
... More
5) Protection: Numerical Breaker Manager Relay MB 140C with 3O/C+1E/F Protection relay provided with In-Built Master trip relay,Trip Circuit Supervision Relay,AntiPumping Relay,PT fuse failure relay,DC supervision,Auxillary Relay for Transformer protection,Annunciation unit,In-Built Breaker Control Push buttons,Local and Remote Push buttons,In-built LED Indications etc., - 5A/110V DC
6) Indication/Alarm:
Buzzer - 1 no
7) Control wiring with appropriate colors: a) Breaker Control Switch (Close-Neutral-Trip) - 110V/25A - 1 no
b) Test Terminal block - 1 no
8) Busbar:
a) Copper busbar with PVC sleeve - 11kV,630A, 25kA/3Sec ( 1 set )
b) Earth bus - ( 1 set )
9) Common for switchgear :
Heater ON / OFF switch with filament type 80Watts space heater & thermostat , single phase switch with socket, Lamp for panel illumination with snap type door limit switch, Fuses / MCBs for AC / DC control - 1 set 10) Enclosure :
MS Sheet steel enclosure & installation suitable for Indoor - 1 set
11) Termination:
a) Incoming (Excluding cable termination kits, lugs and glands) - Bottom
b) Outgoing (Excluding cable termination kits, lugs and glands) - Bottom
12) Surge Protection: 9kV,10kA - 3 nos
13) Mechanical Interlock and Key:
Castell interlock and key ( 2 Base + 1 Key) - 1 set etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply and clamping of 11KV 300 sq.mm. 3 core HT XLPE 11KV (UE) cable on post or on wall with MS Clamps
200
-
-
... More
Supply and providing cable Indoor end termination suitable for 11KV 3 core 240-300 sqmm XLPE HTUG cable with necessary indoor type heat shrinkable Termination kit and accessories complete
5
-
-
... More
Supply and providing cable Outdoor end termination suitable for 11KV 3 core 240-300 sqmm XLPE HT UG cable with necessary outdoor type heat shrinkable Termination kit and accessories complete
4
-
-
... More
Supply and laying of 2C x 2.5 Sq mm XLPE armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
20
-
-
... More
Supply and clamping of 2C x 2.5 Sq mm XLPE LTUG armoured cable on post or on wall with MS clamps.
50
-
-
... More
Supply and laying of 6C x 2.5 Sq mm XLPE armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
20
-
-
... More
Supply and clamping of 6C x 2.5 Sq mm XLPE LTUG armoured cable on post or on wall with MS clamps.
50
-
-
... More
Supply and laying of 19C x 2.5 Sq mm XLPE armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
20
-
-
... More
Supply and clamping of 19C x 2.5 Sq mm XLPE LTUG armoured cable on post or on wall with MS clamps.
50
-
-
... More
Supply and fixing of Neutral CT protection class 500/5A with suitable outdoor type MS enclosure, busbar arrangements with necessary angle iron arrangements, control cable connection from ACB to Neutral CT box etc.,
2
-
-
... More
Supply, erection, testing and commissioning of 2000 KVA, 11KV, 433V, HV - Delta, LV Star off load tap changing, copper wound, outdoor type, distribution transformer as per IS 1180 (Level I) ON AN cooled, confirming to relevant IS 1180 / IEC 60076, Level-I Class A Insulation and mounted on suitable base channel bolted to a suitable RCC plinth capable of bearing approximately 7 ton weight and connected works fitted with the following:
1) HT Cable End box on HV side suitable for connection of 11KV 3c x 300 sq.mm HT cables & LT Cable end box suitable for connection 3200A Bus duct
2) Buchholz relay with shut off valve, alarm and trip contacts.
3) Dehydrating silica gel breather.
4) Conservator with oil filling pipe, cap and drain plug valve.
5) Tank drain cum bottom filter valve with plug.
6) 4 Nos. plain rollers uni and bi-directional under base channels with skid.
7) Dial type thermometer with pocket to measure oil temperature stem type.
8) Tank top filter valve with plug.
9) Explosion vent with diaphragm.
10) Oil level gauge with marking.
2
-
-
... More
11) Two body earthing terminal and 2 nos neutral bushings for solid earthing.
12 Rating and terminal marking diagram plate.
13) Lifting hooks/ Lifting eyes/ Jacking pad to facilitate easy movement of Transformer to ground level, cover lifting lugs.
14) Off load hand operated tap changing switch at standby height from ground level.
15) Tapping on primary winding for voltage variation +5% to -5% in steps of 2.5%.
16) Welded and detachable radiators.
17) Air release device.
18) The transformer should be supplied with first filling of oil as per IS 335 with high dielectric strength, BDV and flash point.
19) Monogram plate.
20) Shut off valve for surge relay
21) Oil surge relay
22) All removable covers shall be provided with weather proof hot oil resistant, resistance gaskets to prevent leakage of water into core, and oil from the tank etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Providing Fencing arrangements all around the HT Yard with vertical post of 65mm Dia GI Pipes at an interval of 2.5 m.c/c fixed into ground by packing with plain cement 1:5:10 100 mm thick for a size of 0.45X0.45X1.00 M and fixing chain link fencing of size 2"X2" for a height of 1.8m above finished floor level, providing kerbwall around the HT yard using brick works in cement mortar 1:6 over the cement concrete 1:5:10 100mm thick, filling the yard portion with HBGS metal 40mm size for 100 mm thickness over a layer of cs sand for a thickness of 100mm including 2 Nos of gate with size 1.50 M X 1.5M with locking arrangements. The rate includes necessary earthworks excavation, plastering and painting etc complete complying with standards specifications and as directed by the departmental officers
1
-
-
... More
Design, Supply, Testing and Installation of 3200A, 36kA, 3L+N, IP- 66 /IP-55Sandwich type copper, Straight (LK/ Legrend / Schneider / Equivalent) feeder insulation class F (155ºC), Dust and Vermin proof made up of Hot galvanised Sheet Steel Epoxy painted,Copper Earthing, necessary angle iron supporting of Bus duct / Rising mains.Reference standard: IEC 61439-6. Reference temperature: 40 °C, Protection degree: IP55. Thickness: 1.5 mm, No of conductors: 4. Painted: RAL 7035 . Halogen Free, The insulation between bars is ensured by a multi sheath made with PET film class F(155°C) etc., complete complying with standard specification and as directed by the department officers.
88
-
-
... More
Supply and fixing of 3200A Flange End
6
-
-
... More
Supply and fixing of 3200A copper flexible (LK/ Legrend / Schneider / Equivalent) for termination for the rising main.
6
-
-
... More
Design, Supply, erection, testing and commissioning of 3200A ACB draw out type floor mounted MV cubical panel dust and vermin proof made of 16SWG CRCA sheet accomodating the following switches and 2 Nos 4 pole 3200A ACB as Incomer unit and 1No.3200A Bus coupler with the following items of work complete to satisfy the CEA (MSES) Regulations 2023.
Supply and fixing of 2 Nos 3200A basic rating 4pole 433V LT ACB confirming to IS 13947 - 2 IEC 60947 - 2 with making capacity of 65 KA and breaking capacity of 65 KA at 600V AC with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with micro processor SR 18 G relay over current trip device adjustable to LTD, STD and release for over current protection UV release with time delay, EF release short circuit protection, Mains CTs for 3 phases lockout, features,separate mould base for each pole for easy maintenance all relevant protection safety accessories as per CEA (MSES) Regulations 2023 inforce with inter connection and terminations as required in specification
INCOMER:
3200A FP draw out type ACB with Interlock-3 Nos
BUSCOUPLER
3200A FP ACB with Interlock-1 No for Bus coupler
OUTGOING
1
-
-
... More
1600A , 50KA, FP ACB with Thermal - Magnetic RS 485 port front drive kit arrangements and associated protections MCB's, R,Y,B Phase Indicating lamps & ON,OFF,TRIP for MCCB, control circuit -6Nos and interconnection with 3 phase and neutral bus bars for suitable size
1250A , 50KA, FP ACB with Thermal - Magnetic RS 485 port front drive kit arrangements and associated protections MCB's, R,Y,B Phase Indicating lamps & ON,OFF,TRIP for MCCB, control circuit -4Nos and interconnection with 3 phase and neutral bus bars for suitable size
630A , 50KA, FP ACB with Thermal - Magnetic RS 485 port front drive kit arrangements and associated protections MCB's, R,Y,B Phase Indicating lamps & ON,OFF,TRIP for MCCB, control circuit -2Nos and interconnection with 3 phase and neutral bus bars for suitable size
(All the ACB & MCCB should be of Higher End like Siemens / LK / Eq / with Front Handle Make)
The bus bar chamber will consist of 4Nos. 4"X1"Copper flat for 3phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per CEA (MSES) Regulations 2023. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partitions. 4'X1" copper flats should be provided all around the panel for earth bus.
The ACB Switches should be connected with the phase and neutral buses with suitable size of rigid Copper flats and each switch should be connected with the earth bus The capacity of the switches size of incoming and out going cable the place to which the supply is feed shall be marked & mounted on switch chamber. The panel board should be mounted on suitable MS channel provided all around at the bottom of the panel. The whole arrangement should be erected on a masonry pedestal to be constructed with suitable foundation bolts and nuts with necessary earth connection and painting and stencil marking of switches capacity and danger board indicators etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Design, Supply, Testing and Installation of 1250A, 36kA, 3L+N, IP66 / IP 55 Sandwich type Copper, Straight feeder , insulation class F (155ºC), Dust and Vermin proof made up of Hot galvanised Sheet Steel Epoxy painted,Copper Earthing, necessary angle iron supporting of Bus duct / Rising mains.Reference standard: IEC 61439-6. Reference temperature: 40 °C, Protection degree: IP55. Thickness: 1.5 mm, No of conductors: 4. Painted: RAL 7035 . Halogen Free, The insulation between bars is ensured by a multi sheath made with PET film class F(155°C) etc., complete complying with standard specification and as directed by the department officers.
50
-
-
... More
Supply and fixing of 1250A Flange End
8
-
-
... More
Supply and fixing of 1250A copper flexible for termination for the rising main.
8
-
-
... More
Supply ,Installation ,Testing and commissioning of Auto Power Factor Correction Relay (APFCR-750KVAr 16 Stage) suitable for 415Volts 3Phase 4wiresystem, fabricated from 16SWG CRCA sheet steel, single fronted, free standing, front hinged, rear removable, extendable on both sides, dust & vermin proof, cubicle type, floor mounted, bus duct flange for incomer, gland plates at top/bottom for control cables, complete with internal wiring, ferrules, name plates, painting, internal exhaust fans for cooling in every compartment etc., conforming to the technical specification for panels & comprising of the following. (Sensing cable shall be connected to CT's located in Main MV Panel Incomers)
Incomer: 1No - 1250A, TPN, 50kA Drawout type, Manual operated ACB with Microprocessor based releases (with Over current / Earth fault / Short circuit ) & Trip& close Coil with Under Voltage releases, high speed closing feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker.
Metering for Incomer:
1No - 96sq.mm Digital Multifunction meter with built-in Selector switch
1set - RYB LED type indication lamps for Phase
1set - RGA LED type indication lamps for ON/OFF/Trip
1No - Auto/Manual selector switch
1set - Cast Resin Current Transformers 1600/5A, class 0.5, 10VA
1set - Control fuses with fuse links & Neutral link
1No - 16 stage automatic electronic power factor controller/indicator.
1Set - Class B SPD with control MCB
Bus bars:
1250A TPN 50kA Copper Busbar. If the busbar is painted with a non-mettallic matt finish paint with colour coded and SMC Bus bar supports. Current density of the bus bars shall not exceed 1.2A/sqmm. Outgoings:
2
-
-
... More
All Capacitor Bank with Auto/Manual selector switch, Manual push button with on delay timers, ON/OFF Indication lamps and 7% Detuned Harmonic filter with discharge resistors arrangement to be provided. 4Sets - Each comprising 400A TP , 50KA MCCB with Capacitor duty contactor, manual over ride circuitary with push buttons & on delay timers in manual circuit, indication lamps for capacitor ON/OFF, three phase delta connected 100KVAR, 525Volt Epcos/Meher heavy duty capacitor, with harmonic reactor 7% detuned copper reactor shall be provided
4Sets - Each comprising 200A TP , 35KA MCCB with Capacitor duty contactor, manual over ride circuitary with push buttons & on delay timers in manual circuit, indication lamps for capacitor ON/OFF, three phase delta connected 50KVAR, 525Volt Epcos/Meher heavy duty capacitor, with harmonic reactor 7% detuned copper reactor shall be provided
4Sets - Each comprising 100A TP , 25KA MCCB with Capacitor duty contactor, manual over ride circuitary with push buttons & on delay timers in manual circuit, indication lamps for capacitor ON/OFF, three phase delta connected 25KVAR, 525Volt Epcos/Meher heavy duty capacitor, with harmonic reactor 7% detuned copper reactor shall be provided
2Sets - Each comprising 63A TP , 25KA MCCB with Capacitor duty contactor, manual over ride circuitary with push buttons & on delay timers in manual circuit, indication lamps for capacitor ON/OFF, three phase delta connected 15 KVAR, 525Volt Epcos/Meher heavy duty capacitor, with harmonic reactor 7% detuned copper reactor shall be provided
2Sets - Each comprising 63A TP , 25KA MCCB with Capacitor duty contactor, manual over ride circuitary with push buttons & on delay timers in manual circuit, indication lamps for capacitor ON/OFF, three phase delta connected 10 KVAR, 525Volt Epcos/Meher heavy duty capacitor, with harmonic reactor 7% detuned copper reactor shall be provided etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply,installation, testing and commissioning of 750 KVA Liquid Cooled Diesel Generator set as per CPCB IV+ Norms Technical specifications.
A) DIESEL ENGINE:- Diesel engine liquid cooled, turbocharged with after cooler, developing 900.6 Hp @ 1500 RPM. 1 is V-type, electric start, compression ignition, 4 stroke designed to run continuously at 1500 RPM confirming to IS 10002, ISO-3046, BS 5514 standard with an overload capacity of 10 % for one hour in every 12 hrs. Operation Diesel Engine will comply with present CPCB-IV+ norms. The diesel engine will comprise of following 1. Dry type air cleaner 2. Exhaust Silencer suitable for canopy 3. Expansion bellow 4. Lube Oil cooler 5. Lube oil filter 6. Fuel Filters 7. Radiator with pusher type fan and mounting 8. In-line mono block fuel injection pump
9 Electronic governor and fuel feed pump 10. Flywheel with starter ring and bell housing suitable for close coupling
11. 24 Volt electric starter motor
12. Battery charging alternator
13. Microprocessor based Controller mounted on the Controller Panel
14. Protection System for Low lube oil pressure High water temperature
2
-
-
... More
B) ALTERNATOR:- 750KVA /600 kw Alternator, suitable for continuous operation rated at 1500 rpm 415 V, 0.8 PF, 50Hz, 3Ph. in SPDP enclosure, self- excited & self- regulated, Brush less, floor mounted with Ball or Bearings on end shields. The alternator conforms to IS: 4722, BS EN 60034-1& will be suitable for tropical condition
C) BASE FRAME:-
Suitable to couple above Engine & Alternator made from steel sheet metal.
D) FUEL TANK:-
990 litre capacity, with Inlet & Outlet arrangement, air vent & drain plug arrangement. E) BATTERIES:-
2 Nos. 180 Ah, 12 Volts Battery with one set of connecting leads of 70sq mm Size Copper Cable. F) STANDARD GENSET CONTROLLER UNIT WITH CONTROL PANEL:-
Genset controller unit with totally enclosed, steel construction canopy in build control panel having following safeties and display parameters: Engine Display parameters 1) Oil Pressure 2) Engine coolant Temperature 3) Fuel Status 4) Engine speed 5) Engine run Hours 6) Total starts
7) Battery condition monitoring
-
-
-
... More
Mechanical Safeties (along with Display) 1) Under/Over speed 2) Low Lube oil pressure 3) High engine coolant temperature 4) Charge Alternator fail 5) Start/Stop fail
Gen-set Display Parameters 1) Phase/Line Voltage 2) Line current
3) Frequency
4) Average Voltage 5) Average Current/Percentage of load 6) Phase kW & Total kW
7) KWH / PF
8) KVA / KVA
9) Earth fault Current
10)DG contactor Manual ON/OFF Electrical Safeties (along with Display) 1) Genset Under/Over voltage 2) Under/Over Battery voltage 3) Under/Over frequency
4) Phase Failure
5) Phase sequence reverse 6) Over Current
7) Over kW 8) High Earth Current
9) Mains Monitoring
10)Mains contactor Manual ON/OFF
-
-
-
... More
TECHNICAL SPECIFICATION OF ACOUSTIC ENCLOSURE CONSTRUCTION
Following are some technical features of Acoustic Enclosure:- 1. The enclosure is modular in construction
2. Base frame is made of Sheet metal
3. Durable industrial locking system is provided on doors. 4.Doors are gasket with high quality EDPM material. CORROSION RESISTANCE:-
To make the enclosure weather proof: - 1. All sheet metal parts/components are hot dipped in seven tanks process, pretreated and passivated. 2. Sheet metal components are painted with P.P base power.
3.Base frame is epoxy coated. 4. Zinc passivated hardware is used to avoid rusting
ACOUSTIC INSULATION:- 1. Sound proofing of the enclosure done with quality Foam confirming to IS: 8183. 2. Acoustic form shall be fire retarded and fire resistant. 3. Attenuates are provided to control sound at entry and exit to and from the container.
4. Specially designed Residential Silencer is provided. ELECTRICAL:- Neutral earth connecting point at termination block / neutral bus at control panel & Body earthing points at alternator leg and acoustic enclosure base frame.
SOUND LEVEL:- The Genset being offered comply to a sound level of 75 dbA (12 point average) at a distance of 1-meter in free field conditions conforming to CPCB Norm
WARRANTY:-
The warranty is for 12 months from commissioning or 5000 hours of operation whichever is earlier, etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply installation, testing and commissioning of 250 KVA Water Cooled Diesel Generator set as per CPCB IV+ Norms Technical specifications.
A) DIESEL ENGINE:- Diesel engine , water cooled, turbocharged with after cooler, developing 310 bhp @ 1500 RPM., electric start, compression ignition, 4 strokes, designed to run continuously at 1500 RPM confirming to IS 10002, ISO-3046, BS 5514 standard. Diesel Engine will comply with present CPCB IV + norms. The diesel engine will comprise of following with Control Panel 1. Dry type air cleaner 2. Exhaust Silencer suitable for canopy 3. Expansion bellow 4. Lube Oil cooler 5. Lube oil filter 6. Fuel Filters 7. Radiator with pusher type fan and mounting 8. In-line mono block fuel injection pump
9 Electronic governor and fuel feed pump 10. Flywheel with starter ring and bell housing suitable for close coupling
11. 24 Volt electric starter motor
12. Battery charging alternato
13. Microprocessor based Controller mounted on the Controller Panel
14. Protection System for Low lube oil pressure High water temperature
B) ALTERNATOR:-
2
-
-
... More
250 kVA/200 Kw Alternator, suitable for continuous operation rated at 1500 rpm 415 V, 0.8 PF, 50Hz, 3Ph. in SPDP enclosure, self- excited & self- regulated, Brush less, floor mounted with Ball or Bearings on end shields. The alternator conforms to IS: 4722, BS EN 60034-1& will be suitable for tropical condition
C) BASE FRAME:-
Suitable to couple above Engine & Alternator made from steel sheet metal.
D) FUEL TANK:-
340 litre capacity, with Inlet & Outlet arrangement, air vent & drain plug arrangement. E) BATTERIES:-
24 Volts Battery with one set of connecting leads of 70sq mm Size Copper Cable. F) STANDARD GENSET CONTROLLER UNIT WITH CONTROL PANEL:-
Genset controller unit with totally enclosed, steel construction canopy in build control panel having following safeties and display parameters: Engine Display parameters 1) Oil Pressure 2) Engine coolant Temperature 3) Fuel Status 4) Engine speed 5) Engine run Hours 6) Total starts
7) Battery condition monitoring
-
-
-
... More
Mechanical Safeties (along with Display) 1) Under/Over speed 2) Low Lube oil pressure 3) High engine coolant temperature 4) Charge Alternator fail 5) Start/Stop fail
Gen-set Display Parameters 1) Phase/Line Voltage 2) Line current
3) Frequency
4) Average Voltage 5) Average Current/Percentage of load 6) Phase kW & Total kW
7) KWH / PF
8) KVA / KVA
9) Earth fault Current
10)DG contactor Manual ON/OFF Electrical Safeties (along with Display) 1) Genset Under/Over voltage 2) Under/Over Battery voltage 3) Under/Over frequency
4) Phase Failure
5) Phase sequence reverse 6) Over Current
7) Over kW 8) High Earth Current
9) Mains Monitoring
10)Mains contactor Manual ON/OFF
-
-
-
... More
TECHNICAL SPECIFICATION OF ACOUSTIC ENCLOSURE CONSTRUCTION
Following are some technical features of Acoustic Enclosure:- 1. The enclosure is modular in construction
2. Base frame is made of Sheet metal
3. Durable industrial locking system is provided on doors. 4.Doors are gasket with high quality EDPM material. CORROSION RESISTANCE:-
To make the enclosure weather proof: - 1. All sheet metal parts/components are hot dipped in seven tanks process, pretreated and passivated. 2. Sheet metal components are painted with P.P base power.
3.Base frame is epoxy coated. 4. Zinc passivated hardware is used to avoid rusting
ACOUSTIC INSULATION:- 1. Sound proofing of the enclosure done with quality Foam confirming to IS: 8183. 2. Acoustic form shall be fire retarded and fire resistant. 3. Attenuates are provided to control sound at entry and exit to and from the container.
4. Specially designed Residential Silencer is provided. ELECTRICAL:- Neutral earth connecting point at termination block / neutral bus at control panel & Body earthing points at alternator leg and acoustic enclosure base frame.
SOUND LEVEL:- The Genset being offered comply to a sound level of 75 dbA (12 point average) at a distance of 1-meter in free field conditions conforming to CPCB Norm
WARRANTY:-
The warranty is for 12 months from commissioning or 5000 hours of operation whichever is earlier etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Auto Synchronizing Panel shall have a outdoor local control of 3200A FP 50KA EDO Type ACB with XLPE Al.Ar.cables/Busduct. The local control cum control panel (As per Technical Specification) to be erected within the container with suitable access door provide or shall be provided suitable outdoor type enclosure required. It shall also have a cable adopter suitable for outgoing cables upto D.G.Set standard control panel.
OFF/Manual/Auto/Test selector switch.
Control circuit ON/OFF switch.
RS485 serial communication port.
Lamp indication & Trip annunciation scheme
Condition Mains ON Generator ON Load on MAINS Load on Generator Emergency trip operated 24 V DC control supply ON Battery charger float mode Battery charger boost mode Condition Indication Trip Annunciation
Set fails to start (with alarm) Low lube oil pressure High water temperature Over speed Earth fault Under voltage Over voltage Battery voltage too low Push button switches Engine start / stop.
1
-
-
... More
DG SYNCHORINIZATION PANEL
2x 750 & 2X250Kva Auto Synchronizing Panel
AUTO START & AUTO SYNC. PANEL
Design, supply, testing and commissioning of Auto start and Auto syn panel with auto load sharing arrangement of Indoor, cubicle type floor mounting panel made out of MS sheet enclosure with Copper busbars, single busbar system, construction with IP42, cable chamber, interconnection, painting, earthing, protection relays etc. comprising of the following : (DG AMF with auto Synchronising control Panel).
INCOMING
2 Sets 630A FP 50KA, Microprocesser based ACB EDO type with UV coil, shunt release, shutter assembly with 250A 4 pole neutral isolating contactor with all other necessary accessories.
2 Sets 1250Amps, FP, 50KA ,Microprocess based ACB EDO type with UV coil, shunt release, shutter assembly with 250A 4 pole neutral isolating contactor with all other necessary accessories.
Instrumental compartment
Providing TNC switch, emergency lockable push button, Multi load manager, Energy meter, Voltmeter, Instantaneous over current, earthfault relay (2 O/C+ 1 E/F), Restricted earth fault relay, Standby earth fault relay, Under voltage relay, Over voltage relay, Reverse directional power relay, Differential protective relay, Under frequency relay, Over frequency relay and Master trip relay, necessary CTs, PTs, control MPCB/MCB/ ELCB/RCBOs, RYB Indication lamps and “ON/OFF/Trip/Rest" indicating lamp, and emergency lockable push buttons, GCU, Battary charger and as per the specification.
Both the incomers & out going shall be provided with mechanical & electrical Interlocking arrangements. and also should have digital type Ammeter, Voltmeter, indication lamps and necessary CTs, PTs and control MPCB/MCB/ ELCB/RCBOs with all other necessary accessories. Instruments Panel
Dual type voltmeter, Dual type frequency meter, Synchronous scope, Synchronising check devise relay, Auto load sharing relay, Voltage balance relay, Current balance relay, Frequency relay with all necessary CTs, PTs, control MPCB/MCB/ ELCB/RCBOs and as per specification.
-
-
-
... More
OUTGOINGS
3200A 4P 50kA Microprocesser based ACB EDO type with UV coil, shunt release, shutter assembly– 1 Nos
All the Outgoing feeder shall be ON/OFF/Trip indication lamps, emergency lockable push buttons, all ACB and MCCBs should have two (spare) potential free contactor for BMS monitoring, Combined digital type Multi function meter (SOCOMEC - Countis E53 / Equivalent) with RS485 port. All ACB feeders should have TNC switch. The rate shall inclusive of necessary CTs, control switches, Front operating handles etc., All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables.The board shall be fabricated for future extension of the panel board.
The necessary electrical interlocking arrangement between incomer and bus coupler by hardware control wiring along with PLC (Programmable Logic Control). The hardware control wiring for MPCC, AMF Panel, Capacitor Panel, Auto Synchronisation Panel and other necessary control wiring and PLC operation shall be feasible to extend for the panel as per the detailed specification . (panel for 4 nos DG sets - 2 Nos of 750KVA & 1No.250KVA).
Each incoming feeders should have inbuilt battery charger for DG sets such as 24Volts, 40Amps,SCR controlled battery charger made up of 16SWG MS sheet enclosure with all accessories having automatic boost and trickle charging arrangements with volt and current limiting circuits, voltmeter for AC/DC supply, ammeter for charging circuit (DC), automatic cut off facility when the Engine alternator is in working condition, MCB for protection, suitable for 230V,50Hz, AC supply, interconnections, body earthing etc. complete as required.
The panel should have the provision to receive the pipe lines for proposed panel gas flooding system etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
supply, installation,testing and commissioning of providing 150mm dia. MS exhaust pipe class' B'
12
-
-
... More
supply, installation, testing and commissioning of providing 150mm dia. MS exhaust pipe class'B' with 50mm thick glass or Mineral wool insulation and 24Swg aluminium cladding
12
-
-
... More
supply, installation, testing and commissioning of providing 250mm dia. MS exhaust pipe class' B'
18
-
-
... More
supply, installation,testing and commissioning of providing 250mm dia. MS exhaust pipe class'B' with 50mm thick glass or Mineral wool insulation and 24Swg aluminium cladding
18
-
-
... More
supply, installation,testing and commissioning of providing 300mm dia. MS exhaust pipe class' B'
18
-
-
... More
supply, installation, testing and commissioning of providing 300mm dia. MS exhaust pipe class'B' with 50mm thick glass or Minneral wool insulation and 24Swg aluminium cladding
18
-
-
... More
Supply& fixing of 50mm thick glass wool insulation for DG engine residential silencer including cutting, fixingof glasswool,polythene covering, chicken mesh and 24 aluminium cladding complete as per the specifications etc. as required.
4
-
-
... More
Supply, Installation Of Ms Structure 12Mtrs Height
4500
-
-
... More
Supply and laying of 40mm ms pipe Fuel Pipe
25
-
-
... More
Supply and laying of 25mm ms pipe Fuel Pipe
25
-
-
... More
supply and fixing 40mm ball valve
5
-
-
... More
supply and fixing 25mm ball valve
4
-
-
... More
supply,installation Of 250mm SS Bellow With Matching Flange,Gaskets,Bolt Nuts etc.
1
-
-
... More
supply,installation Of 300mm SS Bellow With Matching Flange,Gaskets,Bolt Nuts etc
3
-
-
... More
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End
1937
-
-
... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )
108
-
-
... More
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End
273
-
-
... More
Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Staircase Light point Higher End
22
-
-
... More
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End )
186
-
-
... More
Supply and fixing of AC/ DC 76mm Modular buzzer/call bell suitable for 230volts 50c/s single phase AC supply and making good of the concealed portion with suitable colour for PVC concealed earth connection [Higher End]'
3
-
-
... More
Supply and fixing of Linear outline tube 18W/20W [Model No :-CFS-520 Crompton / Equivalent] with connecting accessories with driver complete on wall / ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers..
23
-
-
... More
Supply and fixing of 150W Highbay LED light with integrated driver with PDC housing with IP66 protection, heat resistance tempered glass for protection with 4KV Surge protection on the existing angle iron frame work with PVC unsheathed leads with painting of suitable colour etc., complete complying with standard specification and as directed by the department officers.
22
-
-
... More
Supply and fixing of Cassia Chandelier with Asfour Almaaza Crystal & Gold Finish (D 2000 x H 3100 MM) fitting [Model No. DTD-GLD-ASCAS1780270C Jaquar/Equivalent ] complete with ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
2
-
-
... More
Supply and fixing of WT bulk head fitting with guard suitable for 15W LED lamp with LED
292
-
-
... More
Supply and fixing of 12W LED Round Type Recessed mounted fitting [Model No. CDR-205-12-57-SL-NWH Crompton / Equivalent] with LED on false ceiling from ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
135
-
-
... More
supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers..
423
-
-
... More
Supply and fixing of 20W 4 Feet LED Fitting with LED complete [Higher End] with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
55
-
-
... More
Supply and fixing of 20W 4 Feet LED Fitting with LED complete [Higher End ] with conduit pipe suspension with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
32
-
-
... More
Supply and fixing of 30W LED 4000K 2' x 2' Square Types Surface mounted fitting with LED [Model No.LCTLSNE-30-FO-CDL Crompton / Equivalent ] complete with electronic balleast with TW round block on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
2
-
-
... More
Supply and fixing of 36W LED 2' x 2' Square Type Recess mounted fitting with LED [ Model No.LCTLRF1-36-WW Crompton / Equivalent ] complete with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
255
-
-
... More
Supply and fixing of linear 4ft recess / Suspended 28W LED [Model No.CCP-121-28W /TL/CDL-SL-NWH Crompton / Equivalent ] of dimensions (1148x67x73) capable of forming any decorative pattern chosen by the departmental officials concerned to make the false ceiling a piece of art and to be suspended from steel chain / necessary mounting clips with 3Core copper cable of length not less than 1.5 mtr from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
697
-
-
... More
Supply and fixing of 38W Rhombus design - Geometrically aligned - can be arrange symmetrically or abstract ( Model :-VECTOR VI Crompton / Equivalent )with suspension from the ceiling with necessary mounting kits and with PVC unsheathed Copper leads from terminals to the fitting.The outer powder coating should be customised etc., complete complying with standard specification and as directed by the department officers.
152
-
-
... More
Supply and fixing of 40W LED circular shaped Pendant type Luminarie (Model No.LCSUR6-40-CDL Crompton / Equivalent) with suspension from the ceiling with necessary mounting kits and with PVC unsheathed Copper leads from terminals to the fitting.The outer powder coating should be customised etc., complete complying with standard specification and as directed by the department officers.
217
-
-
... More
Supply and fixing of 40W LED Epsilon shaped Pendant type Luminarie (Model No.CCP-128-36-40-SL-NWH Crompton / Equivalent) with suspension from the ceiling with necessary mounting kits and with PVC unsheathed Copper leads from terminals to the fitting.The outer powder coating should be customised etc., complete complying with standard specification and as directed by the department officers.
10
-
-
... More
Supply and fixing of 1 No of linear Y Shaped recess / Suspended 36W LED with each arm of 4 ft (Model No.CCP-121-28W /TL/CDL-SL-NWH Crompton / Equivalent) capable of forming any decorative pattern chosen by the departmental officials concerned to make the false ceiling a piece of art and to be suspended from steel chain / necessary mounting clips with 3 Core copper cable of length not less than 1.5 mtr from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
52
-
-
... More
supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")
37
-
-
... More
Supply and fixing of Neon Flex 9W IP 66 Rated (K-Lite / equivalent ) of suitable length with necessary connections complete with all accessories etc., complete complying with standard specification and as directed by the department officers.
2500
-
-
... More
Supply and fixing of Strip light 12w (Model No. K-Lite / equivalent) of suitable length with necessary connections complete with all accessories etc., complete complying with standard specification and as directed by the department officers.
2000
-
-
... More
Supply and fixing of LED Step Light 7W ( Crompton / Equivalent) complete with wall opening and making good of the wall with necessary connections etc., complete complying with standard specification and as directed by the department officers.
50
-
-
... More
Supply and fixing of Mirror light 20W LED Battern on wall with PVC unsheathed FRLS Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
42
-
-
... More
Supply and fixing of 150W LED Flood light with integrated driver with PDC housing with IP66 protection, heat resistance tempered glass for protection with 5KV Surge protection on the existing angle iron frame work with PVC unsheathed leads with painting of suitable colour for focusing of approach road etc., complete complying with standard specification and as directed by the department officers.
30
-
-
... More
supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting etc., complete complying with standard specification and as directed by the department officers.
14
-
-
... More
Supply and fixing of 5W, 230V AC Supply "EXIT" LED Light in rectangular aluminium body material with necessary connection complete etc., complete complying with standard specification and as directed by the department officers.
20
-
-
... More
Supply and fixing of 250 mm Modular AC exhaust fan complete with necessary wall opening and making good of the wall etc., complete complying with standard specification and as directed by the department officers.
62
-
-
... More
Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
90
-
-
... More
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed FRLS Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour
2200
-
-
... More
Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
116
-
-
... More
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
173
-
-
... More
Supply and Run of 2 of 2.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.
3600
-
-
... More
Supply and fixing of 2 no. 6A two module socket, 1no.6/16 A two module socket , 2 nos. 6A one module switch, 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
148
-
-
... More
Supply and fixing of 16A to 32Amps moduler DP MCB with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with earth connection etc., complete complying with standard specification and as directed by the department officers.( Higher End )
138
-
-
... More
Supply and fixing of 4nos.6/16A two module socket , 4 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
242
-
-
... More
Supply and run of 2 of 4sqmm PVC insulated SC unsheathed FRLS Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour
10560
-
-
... More
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
56
-
-
... More
Supply and run of 2 of 6sqmm (84/0.3) PVC insulated SC unsheathed FRLS Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.
1680
-
-
... More
Supply and fixing of Weatherproof cabinets - IP 65 - IK 09 - Class II Door and cabinet fully reversible Removable chassis and faceplates 32A FP MCB in flush with wall and making good of the concealed portion with earth connection etc., complete complying with standard specification and as directed by the department officers..
32
-
-
... More
Supply and fixing of brass cable gland 4 x 10 sq.mm PVC armoured LTUG copper cable with earth connection.
64
-
-
... More
Supply and clamping of 4 Core x 10 sq.mm PVC Copper LTUG cable on post or on wall with MS clamps.
1500
-
-
... More
Supply and providing cable end termination of 4 x 10 sqmm PVC LTUG Copper armoured cable with necessary copper cable sockets by crimping etc. with electrical connection complete .
64
-
-
... More
Supply and fixing of Weatherproof cabinets - IP 65 - IK 09 - Class II Door and cabinet fully reversible Removable chassis and faceplates 63A FP MCB in flush with wall and making good of the concealed portion with earth connection etc., complete complying with standard specification and as directed by the department officers.
25
-
-
... More
Supply and fixing of brass cable gland 4 x 16 sq.mm PVC armoured LTUG copper cable with earth connection.
50
-
-
... More
Supply and clamping of 4 Core x 16 sq.mm PVC Copper LTUG cable on post or on wall with MS clamps.
1200
-
-
... More
Supply and providing cable end termination of 4 x 16 sqmm PVC LTUG Copper armoured cable with necessary copper cable sockets by crimping etc. with electrical connection complete .
50
-
-
... More
Supply and fixing of Weatherproof cabinets - IP 65 - IK 09 - Class II Door and cabinet fully reversible Removable chassis and faceplates 100A FP MCB in flush with wall and making good of the concealed portion with earth connection etc., complete complying with standard specification and as directed by the department officers.
25
-
-
... More
Supply and fixing of brass cable gland for 4 x 25 sq.rnrn LTUG armoured cable with earth connection.
50
-
-
... More
Supply and clamping of 4 Core x 25 sq.mm PVC Copper LTUG cable on post or on wall with MS clamps.
1200
-
-
... More
Supply and providing cable end termination of 4 x 25 sqmm PVC LTUG Copper armoured cable with necessary copper cable sockets by crimping etc. with electrical connection complete .
50
-
-
... More
Supply and fixing of 32A FP MCB in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection.
10
-
-
... More
Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm wire and making good of the concealed portion with suitable colour
300
-
-
... More
Supply and fixing of 7 segment 4 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB and another seperate 4 way provision for accomodating 1No.4 Pole ELCB / RCD (Totally 8Ways in one Segement) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. Higher End
i. 63A FP MCB -1No (As incoming)
ii. 63 Amps 4P 30 MA RCCB/ELCB -1Nos
iii. 63 Amps DP MCB Isolator -3Nos
iv. 6A to 32A SP MCB -12 Nos
8
-
-
... More
Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion.
400
-
-
... More
Supply and fixing of 7 segment 6 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB and another seperate 4 way provision for accomodating 3Nos. 2 pole ELCB / RCD (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. Higher End
i. 100 A FP MCB -1No (As incoming)
ii. 40 Amps 30 MA DP RCCB -3Nos
iii. 6A to 32A SP MCB -18 Nos
32
-
-
... More
Supply and run of 4 of 16 sqmm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sq.mm copper wire and making good of the concealed portion with suitable colour
1200
-
-
... More
Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 63A 3P MCB , 3 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
2
-
-
... More
Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 2 nos. 32A 3P MCB , 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
16
-
-
... More
Supply and run of 4 of 25 sqmm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 25 sq.mm copper wire and making good of the concealed portion with suitable colour
800
-
-
... More
Supply and fixing of brass cable gland for 3 1/2 x70 sqmm PVC armoured LTUG cable with earth connection.
4
-
-
... More
Supply and laying of 3 ½ x 70 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
200
-
-
... More
Supply and clarnping of 3 1/2 x 70 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
60
-
-
... More
Supply and providing cable end termination of 3 1/2 x 70 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
4
-
-
... More
Supply and fixing of brass cable gland for 3 1/2 x 150 sqmm PVC armoured LTUG cable with earth connection.
2
-
-
... More
Supply and clarnping of 3 1/2 x 150 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
100
-
-
... More
Supply and providing cable end termination of 3 1/2 x150 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
2
-
-
... More
Supply and fixing of brass cable gland for 3½ x 400 sqmm PVC armoured LTUG cable with earth connection.
78
-
-
... More
Supply and laying of 3 ½ x 400sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
10
-
-
... More
Supply and laying of 5 Runs, 3 ½ x 400sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
1000
-
-
... More
Supply and clamping of 3 ½ x 400 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
530
-
-
... More
Supply and clamping of 5Runs, 3 ½ x 400sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps
100
-
-
... More
Supply and providing cable end termination of 3 1/2 x 400 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete
78
-
-
... More
Rising Mains (Copper):- Design, Supply, Testing and Installation of 1600A, 36kA, 3L+N, IP 66 Sandwich type Copper, Straight feeder (Rising Main), insulation class F (155ºC), Dust and Vermin proof made up of Hot galvanised Sheet Steel Epoxy painted,Copper Earthing, Plug in points at every floor, necessary angle iron supporting of Rising mains.Reference standard: IEC 61439-6. Reference temperature: 40 °C, Protection degree: IP55. Thickness: 1.5 mm, No of conductors: 4. Painted: RAL 7035 . Halogen Free, The insulation between bars is ensured by a multi sheath made with PET film class F(155°C) etc., complete complying with standard specification and as directed by the department officers. [MAKE; LEGRAND /LK /C&S / SCHNEIDER/EQ]
120
-
-
... More
Supply and fixing of 1600A copper flexible for termination for the rising main. [MAKE; LEGRAND /LK /C&S / SCHNEIDER/ EQ]
4
-
-
... More
Supply and fixing End Feed Unit and 4P 1600A 36kA ( Ics=Icu=100% ) MCCB with Rotary Handle , Phase Barrier and flange End Unit. [MAKE; LEGRAND /LK /C&S / SCHNEIDER/EQ]
4
-
-
... More
Supply, Installation, Testing and Commissioning of 250A,25KA, 4P MCCB with Front drive kit .
4
-
-
... More
Supply, Installation, Testing and Commissioning of Tap off Box 400A,25KA, 4P MCCB with Front drive kit . [MAKE; LEGRAND /LK /C&S / SCHNEIDER/EQ]
38
-
-
... More
Supply, Installation, Testing and Commissioning of 400A,25KA, 4P MCCB with Front drive kit .
34
-
-
... More
Supply and fixing of 1600A Flange End Cover for the rising main . [MAKE; LEGRAND /LK /C&S / SCHNEIDER /EQ]
4
-
-
... More
Supply and fixing of Rigid Support. [MR] [MAKE; LEGRAND /LK /C&S / SCHNEIDER/EQ]
36
-
-
... More
Supply and fixing of Spring Hanger. [MR] [MAKE; LEGRAND /LK /C&S / SCHNEIDER/EQ]
36
-
-
... More
Supply and fixing of Wall hanger. [MR] [MAKE; LEGRAND /LK /C&S / SCHNEIDER/EQ]
36
-
-
... More
Supply and erection of 400 Amps Capacity dust and vermin proof floor mounting cubical panel board fabricated out of 16 SWG CRCA sheet for outer body, stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and vertical no of switches one over the other on both sides of bus bar chamber with cable adopter chamber of the extreme end of one side with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board affixed complete on base channel supports to satisfy the CEA (MSES) Regulations 2023) .
1] 400A TPN switch disconnector fuse interior only with HRC fuses double break - 2Nos [L & T / Siemens / Eq] and interconnection with 3 phase and neutral bus bars with interlocking arrangements using 2" X 1/4" copper flat
3]100A TPN switch disconnector fuse interior only with HRC fuses double break- 6 Nos [L & T / Siemens / Eq] and interconnection with 3 phase and neutral bus bars using 1" X 1/8" copper flat
3]63A TPN switch disconnector fuse interior only with HRC fuses double break -3Nos [L & T / Siemens / Eq] and interconnection with 3 phase and neutral bus bars using No. 8 copper A separate chamber on the top of one side should be fixed with 0-500V voltmeter, 0.500A Ammeter, C.T, Selector switches with one set LED pilot lamp with HRC fuses. The bus bar chamber should have 3 Nos of 2" x 1/4" tinned copper flat for 3 phases and neutral and 1 " x 1/4" for body earth bus
must be run all around the panel to provide earth connection to the cubicle switches cable glands etc., the bus bars should be supported on synthetic enamel compound at equal internal as per IS specification. The incoming and outgoing switches should be connected to the bus with the following copper flats etc., complete complying with standard specification and as directed by the department officers.
10
-
-
... More
Supply and erection of 400 Amps Capacity dust and vermin proof floor mounting cubical panel board fabricated out of 16 SWG CRCA sheet for outer body, stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and vertical no of switches one over the other on both sides of bus bar chamber with cable adopter chamber of the extreme end of one side with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board affixed complete on base channel supports to satisfy the CEA (MSES) Regulations 2023 with the following switches confirming to IS specifications.
1] 400A TPN switch disconnector fuse interior only with HRC fuses double break - 2Nos [L & T / Siemens/Eq] and interconnection with 3 phase and neutral bus bars using 2" X 1/4" copper flat
3]100A TPN switch disconnector fuse interior only with HRC fuses double break- 7 Nos [L & T / Siemens/Eq] and interconnection with 3 phase and neutral bus bars using 1" X 1/8" copper flat
3]63A TPN switch disconnector fuse interior only with HRC fuses double break -5Nos [L & T / Siemens/Eq] and interconnection with 3 phase and neutral bus bars using No. 8 copper A separate chamber on the top of one side should be fixed with 0-500V voltmeter, 0.500A Ammeter, C.T, Selector switches with one set LED pilot lamp with HRC fuses. The bus bar chamber should have 3 Nos of 2" x 1/4" tinned copper flat for 3 phases and neutral and 1 " x 1/4" for body earth bus
must be run all around the panel to provide earth connection to the cubicle switches, cable glands etc., the bus bars should be supported on synthetic enamel compound at equal internal as per CEA Regulations. The incoming and outgoing switches should be connected to the bus with the following copper flats etc., complete complying with standard specification and as directed by the department officers.
8
-
-
... More
Supply and erection of 250 Amps Capacity dust and vermin proof floor mounting cubical panel board fabricated out of 16 SWG CRCA sheet for outer body, stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and vertical no of switches one over the other on both sides of bus bar chamber with cable adopter chamber of the extreme end of one side with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board affixed complete on base channel supports to satisfy the CEA (MSES) Regualtions 2023.
1] 250A TPN switch disconnector fuse interior only with HRC fuses double break -2Nos [L & T / Siemens] and interconnection with 3 phase and neutral bus bars using 1" X 1/4" copper flat
2]100A TPN switch disconnector fuse interior only with HRC fuses double break- 6Nos [L & T / Siemens] and interconnection with 3 phase and neutral bus bars using 1" X 1/8" copper flat
3]63A TPN switch disconnector fuse interior only with HRC fuses double break -2Nos [L & T / Siemens] and interconnection with 3 phase and neutral bus bars using No. 8 copper A separate chamber on the top of one side should be fixed with 0-500V voltmeter, 0.500A Ammeter, C.T, Selector switches with one set LED pilot lamp with HRC fuses. The bus bar chamber should have 3 Nos of 2" x 1/4" tinned copper flat for 3 phases and neutral and 1 " x 1/4" for body earth bus
must be run all around the panel to provide earth connection to the cubicle switches ,cable glands etc., the bus bars should be supported on synthetic enamel compound at equal internal as per IS specification. The incoming and outgoing switches should be connected to the bus with the following copper flats etc., complete complying with standard specification and as directed by the department officers.
1
-
-
... More
Supply and fixing of brass cable gland for 3 ½ x 185 sqmm PVC armoured LTUG cable with earth connection.
2
-
-
... More
Supply and clamping of 3 ½ x 185 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
100
-
-
... More
Supply and providing cable end termination of 3 ½ x 185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete
2
-
-
... More
Sulpply and installation of 6000mm pole made of circular mild steel pipe of two section, Bottom section 165.1mm Dia x 4.5mm thick with 1500mm Height & Top section 114.3mm Dia x 3.2mm thick with 2632mm Height. Decorative base made of Gravity Die-cast aluminium (300mm Dia x 205mm Height) covered on bottom and top section joint area in the pole. Bracket-Single arm with 1No.50W LED ornamental fitting (Model No.KL-6799 Pelican Fortis / K-Lite / equivalent)a split constructed type, Bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, with a MS ring upto a height of 1410mm and on top a gravity die cast aluminium flower bud design (205mm Dia x 111mm Height). The elegantly curved single arm made of MS pipe 38.1mm Dia x 2mm thick, with MS scroll, is fixed to the stem by cast iron clamps and cast-iron knobs at both the open ends to fix pendant luminaire at 982mm on either side from the vertical axis of the bracket stem. PDC aluminium service door 348mm height x 110mm width shall be provided with control gear tray, prewired with 2.5 Sq.mm cable, 6A SP MCB and 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Mild steel mounting plate 280mm Dia x 12mm thick to be fixed on masonary pedastal. The pole is coated with primer & powder coating complete, with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour etc., complete complying with standard specification and as directed by the department officers.
50
-
-
... More
Supply, erection, testing and commissioning of Three phase automatic street light controller of outdoor type housed in suitable size powder coated enclosure made of sheet steel accommodating the following with necessary internal wiring with 10Sq.mm Unsheathed Copper wire.
a) 63A four pole MCB=1 No (I/C) b)32A Four pole MCB=8 Nos (O/g)
c) 24 Hrs Time switch (Timer) with Batter backup= 1 No
d) 40A Three phase contactor with 230v coil =1No (MCB’s & Timer: Legrand/L & T /Siemens/BCH/Eq). The metal danger board shall be fixed at approximate location on suitable pedestal.
3
-
-
... More
Design, supply, erection, testing, commissioning and handing over of 16 mtrs High Mast Structure with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. of flood light luminaries with control gear box complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self-lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast.
a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre Width x 1 metre Length and 2 metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site - 1 set.
6
-
-
... More
b) High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch - 1 Set
c) Feeder pillar box comprising 0.90 m x 0.45m x 1,20m floor AI frame with 63 A TPN main switch 1 no , 63 A fuse unit 3 nos. 63 A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor - 1 Set.
d) Neon aviation obstruction light - 1 No
e) 2 Nos of special GI earth electrodes with copper plate 300 x300 x 3mm and copper flat (1”x1/4”) interconnection as per ISS complete with earth connection - 1 set.
f) Hot dip galvanized lightning arrestor - 1 No.
g) Flood light luminaries of specially Heavy type water proof Dust proof integral luminaries fitting provided with 150 Watts LED Light fitting Crompton / Philips / make or Equivalent with drives, Alglas coated reflectors, with cable connection etc. complete as per standard specification. - 8 nos etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply and fixing of brass cable gland for 4 x 16 sqmm PVC armoured LTUG cable with earth connection .
160
-
-
... More
Supply and laying of 4 x 16sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
2100
-
-
... More
supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable through 32mm dia GI pipe in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with sand and refilling the earth to make good by road crossing.
200
-
-
... More
Supply and clamping of 4 x 16 sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps.
50
-
-
... More
Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured LTUG cable in through 32mm dia pipe GI on wall or post with Ms clamps.
50
-
-
... More
Supply and providing cable end termination of 4 x 16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete .
160
-
-
... More
Design, Engineering Supply, fabrication, erection, testing, Commissioning and handing over of 1 No. 20 Passengers MRL lift ,Speed 1.5 m/sec with Stainless Steel Panels ,Disabled friendly,Microprocessor based Controller,VVVF Drive 2 Hrs fire rated door and ARD as per following Technical MRL Specification.
1. Type of Lift : 20 person Passenger lift.
2. Capacity of Lift : 20 Persons / 1360 Kgs.
3. Speed : 1.50 Metre / Sec.
4. Type of Drive : Specific Variable voltage Variable Frequency V3F drive with enhanced ride comfort and leveling functions.
5. No. of Floors : 8 [ Ground + 7Floors].
6. Total Travel : 32.00 Metres (Approximately).
7. Levelling Accuracy : High Level accuracy with smooth & Jerk free stopping.
8. Construction of Car : High quality and suitable thickness S.S. Car and S.S. False ceiling.
9. Position of Machine : Directly in the lift shaft / Machine Roomless - Gearless.
10. No. of Landing Entrance : One in front Total 8Nos.
11. No. of Car Entrance : One in front only.
12. Car Entrance Door : Power operated V3F driver Side / Center opening sliding S.S. doors with VF operation.
13. Landing Entrance Door : Power operated V3F Driver side opening S.S. Doors with provision emergency key opening at all Landings.
14. Lift well existing : 2400 mm (Width) x 2400 mm (depth).
15. Lift pit depth required : 1600mm.
16. Car Size : 2000mm (Width) x 1500mm (depth)
17. Car Clear opening : 1200mm
4
-
-
... More
18. Power Supply : 400 / 440V 3 Phase, 50 Cycles / sec AC supply for power and 230 V 50HZ single phase AC supply for light. with proper two distinct earth flat of adequate size from ISI earthing at ground floor. 19. Control : Micro Computer (micro processor) based simplex, collective control with or without attendent.
20. Car fittings : Compact LED lighting with 1No. 300mm sweep cabin fan.
21. Lift well : Existing RCC Construction with brick masonry .
22. Indication : Up / Down Digital direction and position indicator for all landing and inside the car.
23. Emergency Alarm Bell : Battery operated alarm bell with automatic changing device.
24. Emergency light : Battery operated light with automatic charging device.
25. Fireman’s Switch : Include at Ground Floor.
26. Scaffolding 27. M.S.Sill angles and facia plates 28. Steel for lift machinery 29. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year included in this rate.
30. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type of battery system with charger, invertor, under volitage protection system etc, complete with all accessories.
31. Provision of intercom with phone 32. Lift License : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance polices if any and obtaining CEIG safety certificate as per lift act.
33. Floor announciator with music. Included.
-
-
-
... More
34. Special Feature:
(a). Infra red colour sensor with height screen.
(b). Stainless steel signal fixtures.
(c). Vandal proof button with S.S. cover.
(d). S.S door frames for landing doors.
(e). VF Door operator.
(f). Call register signal.
(g).Stainless steel facia plate for car operating panel and landing fixtures.
(h). ON - OFF Switch for fan and light.
(i). Voice Announciator.
35. Lift Duty motor of adequate capacity, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffer electro machanical door locks, emergency key, side supporting angles motor over load protection devices. Final limit switch, main suspension ropes, counter weights, lifting joist for mounting the machineries.
36. Site testing in accordance with IS 14665 should be carried out at the time of handing over.
37.All disabled Friendly features are included as per differently abled Act.
38. 2 Hrs Fire rated doors etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Design, Engineering, Supply, fabrication, erection, testing, Commissioning and handing over of 1500 Kgs Goods / Service MRL Lift ,Speed 1 m/s with Stainless Steel Panels ,Microprocessor Based Controller ,VVVF Drive , 2 Hrs Fire Rated Doors and ARD as per following Technical Specification.
1. Type of Lift : Goods / Service Lift
2. Capacity of Lift : 1500 Kgs.
3. Speed : 1.00 Metre / Sec.
4. Type of Drive : Specific Variable voltage Variable Frequency V3F drive with enhanced ride comfort and leveling functions.
5. No. of Floors : 8 [ Ground + 7Floors].
6. Total Travel : 32.00 Metres (Approximately)..
7. Levelling Accuracy : High Level accuracy with smooth & Jerk free stopping.
8. Construction of Car : High quality and suitable thickness S.S. Car and S.S. False ceiling.
9. Position of Machine : Directly in the lift shaft / Machine Roomless - Gearless.
10. No. of Landing Entrance : One in front Total 8Nos.
11. No. of Car Entrance : One in front only.
12. Car Entrance Door : Power operated V3F driver Side opening sliding S.S. doors with VF operation.
13. Landing Entrance Door : Power operated V3F Driver side opening S.S. Doors with provision emergency key opening at all Landings.
14. Lift well existing : 2500 mm (Width) x 3000 mm (depth).
15. Lift pit depth required : 1600mm.
16. Car Size : 1700mm (Width) x 2000mm (depth) 17. Car Clear opening : 1700mm 18. Power Supply : 400 / 440V 3 Phase, 50 Cycles / sec AC supply for power and 230 V 50HZ single phase AC supply for light with proper two distinct earth flat of adequate size from ISI earthing at ground floor. 19. Control : Micro Computer (micro processor) based simplex, collective control with or without attendent.
20. Car fittings : Compact LED lighting with 1No. 300mm sweep cabin fan.
21. Lift well : Existing RCC Construction with brick masonry.
1
-
-
... More
22. Indication : Up / Down Digital direction and position indicator for all landing and inside the car.
23. Emergency Alaram Bell : Battery operated alarm bell with automatic changing device.
24. Emergency light : Battery operated light with automatic charging device.
25. Fireman’s Switch : Include at Ground Floor.
26. Scaffolding : Included.
27. M.S.Sill angles and facia plates : Included.
28. Steel for lift machinery : included.
29. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year included in this rate.
30. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type of battery system with charger, invertor, under voltage protection system etc, complete with all accessories.
31. Provision of intercom with phone : Included.
32. Lift License : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance polices if any and obtaining CEIG safety certificate as per lift act.
33. Floor announciator with music. Included.
34. Special Feature:
(a). Infra red colour sensor with height screen.
(b). Stainless steel signal fixtures.
(c). Vandal proof button with S.S. cover.
(d). S.S door frames for landing doors.
(e). VF Door operator.
(f). Call register signal.
(g).Stainless steel facia plate for car operating panel and landing fixtures.
(h). ON - OFF Switch for fan and light.
(i). Voice Announciator.
-
-
-
... More
35. Lift Duty motor of adequate capacity, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffer electro machanical door locks, emergency key, side supporting angles motor over load protection devices. Final limt switch, main suspension ropes, counter weights, lifting joist for mounting the machineries.
36. Site testing in accordance with IS 14665 should be carried out at the time of handing over.
37.All disabled Friendly features are included as per differently abled Act.
38. 2 Hrs Fire rated doors etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Design, Engineering ,Supply, fabrication, erection, testing, Commissioning and handing over of 1500 Kg Goods / Serivce MRL lift With Stainless steel Panels ,Microprocessor based Controller ,VVVF Drive, 2 Hrs Fire Rated Doors with following Technical Specification.
1. Type of Lift : Goods / Serivce lift
2. Capacity of Lift : 1500 Kgs.
3. Speed : 1.00 Metre / Sec.
4. Type of Drive : Specific Variable voltage Variable Frequency V3F drive with enhanced ride comfort and leveling functions.
5. No. of Floors : 3 [ Ground + 2Floors].
6. Total Travel : 12.15 Metres (Approximately).
7. Levelling Accuracy : High Level accuracy with smooth & Jerk free stopping.
8. Construction of Car : High quality and suitable thickness S.S. Car and S.S. False ceiling.
9. Position of Machine : Directly above the lift shaft / Machine Roomless - Gearless.
10. No. of Landing Entrance : One in front Total 3Nos.
11. No. of Car Entrance : One in front only.
12. Car Entrance Door : Power operated V3F driver Side opening sliding S.S. doors with VF operation.
13. Landing Entrance Door : Power operated V3F Driver side opening S.S. Doors with provision emergency key opening at all Landings.
14. Lift well existing : 2500 mm (Width) x 3000 mm (depth).
15. Lift pit depth required : 1600mm.
16. Car Size : 1700mm (Width) x 2000mm (depth) 17. Car Clear opening : 1700mm 18. Power Supply : 400 / 440V 3 Phase, 50 Cycles / sec AC supply for power and 230 V 50HZ single phase AC supply for light. with proper two distinct earth flat of adequate size from ISI earthing at ground floor. 19. Control : Micro Computer (micro processor) based simplex, collective control with or without attendent.
20. Car fittings : Compact LED lighting with 1No. 300mm sweep cabin fan.
21. Lift well : Existing RCC Construction with brick masonry.
2
-
-
... More
22. Indication : Up / Down Digital direction and position indicator for all landing and inside the car.
23. Emergency Alaram Bell : Battery operated alarm bell with automatic changing device.
24. Emergency light : Battery operated light with automatic charging device.
25. Fireman’s Switch : Include at Ground Floor.
26. Scaffolding : Included.
27. M.S.Sill angles and facia plates : Included.
28. Steel for lift machinery : included.
29. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year included in this rate.
30. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type of battery system with charger, invertor, under volitage protection system etc, complete with all accessories.
31. Provision of intercom with phone : Included.
32. Lift License : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance polices if any and obtaining CEIG safety certificate as per lift act.
33. Floor announciator with music. Included.
34. Special Feature:
(a). Infra red colour sensor with height screen.
(b). Stainless steel signal fixtures.
(c). Vandal proof button with S.S. cover.
(d). S.S door frames for landing doors.
(e). VF Door operator.
(f). Call register signal.
(g).Stainless steel facia plate for car operating panel and landing fixtures.
(h). ON - OFF Switch for fan and light.
(i). Voice Announciator.
-
-
-
... More
35. Lift Duty motor of adequate capacity, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffer electro machanical door locks, emergency key, side supporting angles motor over load protection devices. Final limt switch, main suspension ropes, counter weights, lifting joist for mounting the machineries.
36. Site testing in accordance with IS 14665 should be carried out at the time of handing over. 37.All disabled friendly features are included as per differently abled Act.
38. 2 Hrs Fire rated doors etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply, Erection, Testing, Commissioning and Handing over of ((From Ground Floor to First Floor) (1 no. for UP and 1 no. for DOWN)) Heavy Duty ESCALATOR as per following technical specifications :
1.STANDARDS : IS 4591 2022
2.STEP : DEPTH OF STEPS NOT LESS THAN 40CM & RISE NOT MORE THAN 22CM
3.HORIZONTAL STEPS : THREE,
4.VERTICAL RISE : 3900MM, 5.HORIZONTAL SPAN : 12314MM,
6.INCLINATION : 30Degree,
7.SPEED : 0.50M/s, 8.GEAR BOX : WORM GEAR, 9.LIGHTING VOLTAGE : 240v, 10.START : STAR-DELTA, 11.POWER VOLTAGE : 415V,
11.1.FREQUENCY : 50 HZ,
12.ARRANGEMENT : PARALLEL,
13.MOTOR POWER : 5.5 KW, 14.OVER SPEED GOVERNER 15.DELIVERY IN 16.INTERMEDIATE SUPPORT : NOT REQUIRED, 17.INSTALLATION : INDOOR -
18.STANDARD INSTALLATION - 500MM EXTENSION FOR VVVF, 19.TOP : EXTENSION,
20.BOTTOM : STANDARD, 21.HANDRAIL COLOR : BLACK,
22.BALUSTRADE PANEL : TEMPERED SAFETY GLASS (10MM),
2
-
-
... More
23.BALUSTRADE : VERTICAL, SLIMLINE - HIEGHT 1000MM,
23.1.BALUSTRADE PROFILE : HAIRLINE STAINLESS STEEL.
24.SKIRTING : HAIRLINE STAINLESS STEEL,
25.INNER & OUTER DECKING : HAIRLINE STAINLESS STEEL, 26.FLOAT SWITCH AT LOWER MACHINE ROOM : YES,
27.PANEL OF LANDING PLATE : ETCHED STAINLESS STEEL,
28.OIL-WATER SEPARATOR : YES,
29.STEP : DIE CAST ALIUMINIUM,GREY COLOUR
30.ZINC STEEL DRIVE CHAIN COVER : YES,
31.STEP DEMARCATION : YELLOW DEMARCATION, 32.CHAIN PROTECTION : ZINCED, 33.COMBS : DIE CAST ALUMINIUM, YELLOW PAINTING,
34.STOP BUTTON 35.BROKEN DRIVE-CHAIN CONTACT 36.SKIRTING CONTACT 37.HANDRAIL ENTRANCE CONTACT 38.BROKEN STEP-CHAIN CONTACT 39.STEP SAG CONTACT
40.PHASE MONITOR
41.ZINC STEEL FLYING WHEEL COVER 42.MOTOR OVERLOAD AND OVERHEAT CONTACT 43.COMB CONTACT : 44.STEP GAP ILLUMINATION
45.MAINTENANCE LOCKING DEVICE
46.ALARM BUZZER 47.MOTOR SPEED & ANTI-REVERSAL MONITOR
48.STEP ANTI-STATIC BRUSH
-
-
-
... More
49.SAFETY BRAKE ON MAIN SHAFT
50.HANDRAIL ANTI-STATIC ROLLER 51.EARTH LEAKAGE CIRCUIT-BREAKER 52.SERVICE BRAKE RELEASE CONTACT 53.MECHANICAL ANTI-REVERSAL DEVICE
54. LED TRAFFIC LIGHT (2), FIXED ARROW SIGN-ONE EACH AT TOP & BOTTOM.
55.STEP REVERSING FENCES 56.TRAFFIC LIGHT
57.HANDRAIL BROKEN CONTACT 58.4 DRY CONTACT (UP, DN, ERROR, STOP)
59.LCD FAULT DISPLAY AT CONTROLLER
60.FIRE CONTACT
61.SKIRTING LIGHTING 62.LED COMB LIGHTING
63.SKIRTING BRUSH
64.SKIRTING BRUSH (SINGLE ROW) 65.STEP MISSING CONTACT 66.LANDING PLATE SWITCH
67.AUTO LUBRICATION SYSTEM, 68.AUTO-START : DIFFUSE / RADR SENSOR TYPE, 69.CONTROLLER LIFT DEVICE - ONE SET
70.MAINTENANCE FENCE - ONE SET
71.INSPECTION HANDLE - ONE SET
72.KEY SWITCH 73.STEP ANTI-UPTHRUST DEVICE
74.ZINC PLATED STEEL FLYWHEEL COVER
-
-
-
... More
75.SWITCH BOARD BOX (IP54) 76.SOFT STOP 77.LCD FAULT DISPLAY AT MAIN CONTROLLER 78.ZINC PLATED STEEL DRIVE CHAIN COVER
79.HANDRAIL SPEED MONITOR 80.BRAKE LINING SAFETY SWITCH 81.COMB LIGHTING WITH 30 MIN. UPS 82.OUTSIDE TRUSS CLADDING : HAIRLINE STAINLESS STEEL ON LEFT, RIGHT & BOTTOM, 83.FREE SERVICE FOR ONE YEAR 84.ESCALATOR LICENSE 85.ALL DISABLED Friendly FEATURES ARE INCLUDED AS PER DIFFERENTLY ABLED ACT.
86.LICENSE : PREPARATION OF DRAWING,PAYMENT OF CHARGES TO CEIG / LIFT INSPECTORATE AND INSURANCE POLICIES IF ANY. OBTAINING CEIG SAFETY CERTIFICATE AS PER LIFT ACT etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Design, Supply, Erection, Testing and Commissioning of 16 Persons Capacity, disabled friendly, gearless passenger lift with machine room, custom made, specially designed and factory fabricated Capsule / Circular Lift with glass panel made of toughened glass of 10mm thick with necessary S.S supports, in the Circular portion and with 1 Hour fire rated glass door and the specifications confirimng to IS 14665.(The carpet area to be as per the IS : 14665)
The lift car to have a rectangular portion made of S.S panels at the 2 sides of the entrance of 900mm (W) x 1400mm (D) and integrated with 1400mm dia rear portion construction made out of 10mm thick toughened glass panel with S.S supports for the entire height of the lift car (From Floor to Ceiling) 1. Type of Lift : 16 Passenger lift.
2. Capacity of Lift : 16 Persons / 1088 Kgs.
3. Speed : 1.25 Metre / Sec.
4. Type of Drive : Specific Variable voltage Variable Frequency V3F drive with enhanced ride comfort and leveling functions.
5. No. of Floors : 8 [ Ground + 7Floors].
6. Total Travel : 32 Metres (Approximately).
7. Levelling Accuracy : High Level accuracy with smooth & Jerk free stopping.
8. Construction of Car : S.S in the front portion and 10mm thick laminated High quality toughened glass with SS support.
9. Position of Machine : Directly above the lift shaft / with Machine Room - Gearless.
10. No. of Landing Entrance : One in front Total 8Nos.
11. No. of Car Entrance : One in front only.
12. Car Entrance Door : Power operated V3F driver Side / Center opening sliding High quality laminated atleast 10mm thick tempered glass with VF operation.
13. Landing Entrance Door : Power operated V3F Driver side opening, atleast 10mm thick laminated High quality tempered glass 1 Hour fire rated with provision of emergency key opening at all Landings.
14. Lift well existing : Depth on both sides of entrance wall from side brickwall 900mm & 1400m (D) on 2 side of entrance with concrete pillar etc.,
2
-
-
... More
15. Lift pit depth required : 2000mm.
16. Car Size : Front portion made of S.S of 900mm(W) x 1000mm (D) (On 2 Sides) and rear side made of 10mm thick laminated High quality toughened glass with S.S support granited flooring & S.S false Ceiling with LED fitting & Cabin fan, Ceiling Height of 2200mm
17. Car Clear opening : 900 mm wide.
18. Power Supply : 400 / 440V 3 Phase, 50 Cycles / sec AC supply for power and 230 V 50HZ single phase AC supply for light. with proper two distinct earth flat of adequate size from ISI earthing at ground floor. 19. Control : Micro Computer (micro processor) based simplex, collective control with or without attendent.
20. Car fittings : Compact LED lighting with 1No. 300mm sweep cabin fan.
21. Lift well : Brick & RCC Wall.
22. Indication : Up / Down Digital direction and position indicator for all landing and inside the car.
23. Emergency Alaram Bell : Battery operated alarm bell with automatic changing device.
24. Emergency light : Battery operated light with automatic charging device.
25. Fireman’s Switch : Include at Ground Floor.
26. Scaffolding : Included.
27. M.S.Sill angles and facia plates : Included.
28. Steel for lift machinery : included.
29. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year included in this rate.
30. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type of battery system with charger, invertor, under volitage protection system etc, complete with all accessories.
31. Provision of intercom with phone : Included.
32. Lift License : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance polices if any .Obtaining CEIG safety certificate as per lift act.
33. Floor announciator with music. Included.
-
-
-
... More
34. Special Feature:
(a). Infra red colour sensor with height screen.
(b). Stainless steel signal fixtures.
(c). Vandal proof button with S.S. cover.
(d). S.S door frames for landing doors.
(e). VF Door operator.
(f). Call register signal.
(g).Stainless steel facia plate for car operating panel and landing fixtures.
(h). ON - OFF Switch for fan and light.
(i). Voice Announciator.
35. Lift Duty motor of adequate capacity, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffer electro machanical door locks, emergency key, side supporting angles motor over load protection devices. Final limt switch, main suspension ropes, counter weights, lifting joist for mounting the machineries.
36. Site testing in accordance with IS 14665 should be carried out at the time of handing over. 37.All disabled Friendly features are included as per differently abled Act.
38. One Hrs Fire rated doors etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply and installation of Inverter Scroll Compressor Modular VRF outdoor units equipped ,special acryl precoated heat exchanger,low noise condenser fan,auto check function for connection error,auto address setting,with multiple outdoor units capacities and quantities as mentioned below.Refrigerant Shall be R410A etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
16 HP
6
-
-
... More
18 HP
4
-
-
... More
20 HP
22
-
-
... More
22 HP
4
-
-
... More
24 HP
7
-
-
... More
26 HP
12
-
-
... More
30 HP
17
-
-
... More
34 HP
1
-
-
... More
Supply and installation of control panel for OUTDOOR Unit /suitable DOL Starter with 16A power contactor , OLR Single phase preventer indication Lamp and Push Button RYB indication Lamp 32A TPN MCB Auto Manual selector switch wall mounting panel in Siemens Grey powder coated
73
-
-
... More
Voltage Scanner Under voltage cut-off 340+/-4VAC,Over voltage cut-off 450+/-4VAC, contact rating 10Amps @230V unbalance trip setting 60V+/-4VAC, trip delay time 3 to 5sec. Start updelay 3 minutes
73
-
-
... More
Supply, fabrication and fixing of MS Channel for Mounting the Airconditioning Outdoor Unit
73
-
-
... More
VRF 4 Way Cassette Indoor Unit etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
1 TR
3
-
-
... More
1.5TR
1
-
-
... More
2 TR
2
-
-
... More
3 TR
20
-
-
... More
4 TR
15
-
-
... More
Supply, fabrication and fixing of MS Channel for Mounting the Airconditioning Indoor Unit
41
-
-
... More
Supply and fixing of 1.03 Tr Wall-Mounted Panel with Cordless Remote Controller.
3
-
-
... More
Supply and fixing of 1.6 Tr Wall-Mounted Panel with Cordless Remote Controller.
1
-
-
... More
Supply and fixing of 2.02 Tr Wall-Mounted Panel with Cordless Remote Controller.
2
-
-
... More
Supply and fixing of 3 & 4 Tr Wall-Mounted Panel with Cordless Remote Controller.
35
-
-
... More
High ESP Duct (200Pa / 220Pa) with Wired Controller, No Drain Pump
-
-
-
... More
6.3 TR
14
-
-
... More
8.0 TR
73
-
-
... More
12.8 TR
14
-
-
... More
16 TR
26
-
-
... More
Supply ,fabrication and fixing of MS channel for Mounting the Airconditioning Indoor unit
127
-
-
... More
Supply and fixing of VFD starter panel for 3KW (For AHU Conrol Kit)
87
-
-
... More
Supply and fixing of VFD starter panel for 5KW (For AHU Conrol Kit)
40
-
-
... More
Supply and fixing of VRF Expansion VALVE KIT
127
-
-
... More
supply ,fabrication and fixing of fresh air louver made of extruded aluminium with bird screen provided intake louvers
113
-
-
... More
Supply and fixing of Flexible Canvas connection
127
-
-
... More
Supply and fixing of extruded aluminium powder Coated ,Supply and return Air Grills /Diffusers with volume control damper
350
-
-
... More
Supply and fixing of Ivory colour powder coated painted Aluminium Diffuser Jet Nozzle
195
-
-
... More
Supply and fixing of Flexible insulated Duct for inter connecting between main duct and Jet Nozzle
195
-
-
... More
Supply ,fabrication and erection of fabricated ducting made up of GI Sheets of 20 Gauge thickness
3650
-
-
... More
Supply ,fabrication and erection of fabricated ducting made up of Gi Sheets of 22 Gauge thickness
5400
-
-
... More
Supply ,fabrication and erection of fabricated ducting made up of Gi Sheets of 24 Gauge thickness.
9750
-
-
... More
Supply and providing acoustic for initial portion of ducting with 12mm thick fiber glass rigid board covered with tissue paper and aluminium prefabricated sheet
5500
-
-
... More
Supply and providing thermal insulation of 9mm thick vido flex with Aluminum Foil.
12800
-
-
... More
Supply, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specification
-
-
-
... More
Fire damper
25
-
-
... More
Actuator
16
-
-
... More
Supply and fixing of 40mm – U value of 0.72 W/m2K Acoustic thermal insulation for AHU Room
620
-
-
... More
Supply and fixing of Refnet
230
-
-
... More
Pressure Testing & Commissioning of VARIABLE REFRIGERANT VOLUME/FLOW SYSTEM comprising of Inverter OUTDOOR UNIT
1720
-
-
... More
Supply and installation of hard/Soft drawn soft refrigerant piping. The brazing to be carried out with bleeding of nitrogen. The copper pipe to be insulated with 19mm thick for suction and 13mm thick for liquid line with class O make ( All Copper pipes to be covered with micropolyshield coating, Drier/filter and shutoff valves to be installed in liquid line of the outdoor unit)
-
-
-
... More
36.9 mm
3200
-
-
... More
28.6 mm
1300
-
-
... More
22.2 mm
1275
-
-
... More
19.1 mm
1250
-
-
... More
15.9 mm
1175
-
-
... More
12.7 mm
1175
-
-
... More
9.5 mm
1075
-
-
... More
6.4 mm
1050
-
-
... More
Supply and apply for sun light exposed area Copper pipes to be covered with micropolyshield coating
2500
-
-
... More
Supply and laying of PVC insulated sealed copper control cables 2Cx1.5 sqmm,as per relevant IS.
6500
-
-
... More
Supply and laying of Cabling PVC insulated copper cables 3Cx2.5 sqmm for indoor unit power supply as per relevant IS.
1850
-
-
... More
Providing and fixing in position the following PVC pipes with necessary Insulation for drain cut to required lengths and installed complete with all necessary fittings like elbows, tees & reducers.
-
-
-
... More
32 MM
2350
-
-
... More
40 MM
690
-
-
... More
Supply and filling Refrigerant R410A gas topping at site for VRF
2500
-
-
... More
Unit lifting shifting , positioning charges for outdoor unit
72
-
-
... More
Supply of 8 mm dia Aluminium alloy Solid Round conductor of material AlMgSi used in air termination and down conductor system,and roof holder vertical,horizontal clamps 4way 3 way & accessories.Solid Round "S". Conductor during temperature variations
1200
-
-
... More
Supply of1.2 mtr air termination rod of material Aluminium alloy of diametre 16/10 mm crimped on both ends (Tappered Type) The rod shall be mounted with stainless steel clamp and fixing accessories. Krish / Equvalient
6
-
-
... More
Supply of 2 mtr length air termination rod of Aliminium alloy of diametre 16/10 mm crimped on both ends (Tappered Type) The rod shall be mounted with stainless steel clamp and fixing accessories.
2
-
-
... More
Supply of 4 mtr vertical air terminal material Aluminium alloy as per IEC 62561-2 of diametre 16/10 mm crimped on both ends stand 40mm GI pipe 2mtrs, wall 6mm thicksX 2mm, FRB base plate frb 200x200mm 6mm ,16x150 ancher Bolt
8
-
-
... More
Supply of Stainless steel 304 Grade Test Joint with enclosure to interconnect between 8 mm Al round conductor & 10 mm copper bonded round conductor.
14
-
-
... More
Supply of Rust resistant non corossive 10 mm diameter copper bonded steel round conductor used for Earth termination inside the concrete and soil.
280
-
-
... More
Supply of stainless steel 304 Grade conductor Holder for fixing the 8-10 mm dia round conductor on the wall to earth pit
8
-
-
... More
Supply of make UL Listed Maintenance free copper bonded earth rod of 3048 mm length having the dia of 17.2mmx3000mm with copper coating thickness of 250 microns. The rod has been tested for Dimension, Marketing Tensile Strength, Salt mist, coating thickness. 254mmdia (top)330mm dia (bottom) 260mm(height)142/od Clamp priveled earthrod.25x2 kgs BFC-Electrical resistivity test before and after corrosion test.
14
-
-
... More
Supply of 25mm x 6mm GI strip from AL conductor to the earthpit station and further the samestap shall be used for interconnecting all earth pits below ground level Zine coating 500g/m square ground level.
200
-
-
... More
supply and fixing of 15KVA Double Conversion online UPS Systems (3 phase input/3 phase output ) with microprocessor based PWM technology with high efficiency greater than 90% and suitable for 1 phase circuit lights/fan load and computers without interruption with 2 hours backup supported with 12V /120AH -24 Nos of SMF battery complete with the following specifications.
CONFIGURATION:
True On line double conversion ups system with pulse width modulation (PWM) Technology using IGBT inverter.
RECTIFIER:
Full wave(shall fully meet the specified input power requirements )
INPUT: 3 phase 320V – 460V OUT PUT:230V +1% on battery mode FREQUENCY: 47HZ-53HZ
SYSTEM DC VOLTAGE: 288V INVERSION TECHNOLOGY: Micro processor controlled, pulse width modulation with Instantaneous sine Wave control using IGBT.
INVERTER OUT PUT : ( Out put Galvanic Isolation through Double winding Isolation Transformer at Output of Inverter shall be part of UPS Design )
LOAD POWER FACTOR: 0.8 to lag to unity REGULATION : for Balanced load + 1% For 100% unbalanced load + 2%
FREQUENCY: 50Hz + 0.5%
WAVE FORM : True sine wave TOTAL HARMONIC DISTORTION : Less than 5%
OVERLOAD CAPACITY: Inverse Time Characteristic 125% for 10 minutes
13
-
-
... More
150% for 1 minutes
EFFICIENCY : 1. Converter – 90% 2.Inverter - 85% 3. Overall – 80 % ( full load) OPERATING TEMPERATURE : 0 to 45 Degrees centigrade on full load CREAST FACTOR: 3 : 1
RELATIVE Humidity : : 95% at 35 Degree Centigrade non- Condensing CHARGER: Built in solid state automatic float- cum boost charger with constant current, constant voltage mode of charging along with current limiting features. Ripple in DC shall not exceed 2% when battery is disconnected.
PROTECTION( in built)
i) output under Voltage
ii) output over Voltage
iii) ) output over load
iv) output short circuit.
v) HRC fuses /output/ battery vi) Battery low trip
vii) battery charges current limit.
INDICATIONS:
i. Mains ON ii. Inverter ON
iii. UPS ON battery iv. Load On UPS v. Battery LOW METERING: i. Output AC Voltage
ii.Output DC Voltage / Load details and Frequency By Pass: Manual etc., complete complying with standard specification and as directed by the department officers.
-
-
-
... More
Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height cable tray on ceiling or on wall with necessary fasteners, bolt nuts and clamps etc., complete complying with standard specification and as directed by the department officers.
2800
-
-
... More
Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height cable tray on ceiling or on wall with necessary fasteners, bolt nuts and clamps etc., complete complying with standard specification and as directed by the department officers.
1500
-
-
... More
Safety Accessories measuring instruments and tools as follows First Aid Box complete with all First Aid Medicines-1 no, 4 nos 9 litre fire bucket with sand- 1 set, Rubber mat 12mm thickness 1mX2m. - 5 Nos ,'Fire extinguisher -DCP- 5Kgs-2nos, Shock Treatment Chart fixed in glass frame, Earth Discharge rod-1 no, Metallic Danger Board as required by the Electrical Authorities - 1NoAC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories.
6
-
-
... More
Providing fuel oil to run the set for 8 hours on load testing and commissioning using water rheostat or suitable loading elements
2000
-
-
... More
Preparation of site plan, physical layout, electrical line schematic diagram for sub stations in 5 sets getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG inspection and obtaining safety certificate preparation of 1 set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in electrical room and payment of CEIG inspection fees.
1
-
-
... More
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .
21
-
-
... More
Supply, installation, testing & commissioning of copper plate earth electrode of size 600 x 600 x3.15mm at a depth of 3000mm filled with salt, charcoal etc., construction of chamber, providing heavy duty concrete cast slab, painting & making etc.,
58
-
-
... More
Supply and run of 60mm x 10mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
50
-
-
... More
Supply and run of 50mm x 10mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
490
-
-
... More
Supply and run of 50mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
980
-
-
... More
Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
850
-
-
... More
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.
720
-
-
... More
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
750
-
-
... More
Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 1No.32A TP MCB & 9Nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
10
-
-
... More
Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection.
20
-
-
... More
Supply and clamping of 3 ½ x 25 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
500
-
-
... More
Supply and providing cable end termination of 3½ x 25 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete
20
-
-
... More
Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
81
-
-
... More
Supply and fixing of Ornamental Pendent Globe Diffuser with Rose Gold Finish Pendant (Jaguar / Equivalent) complete with ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
4
-
-
... More
Supply and fixing of LED Bollard with soft 360º light distribution with mounting screws and brackets with PVC unsheathed copper leads from terminals to the fitting suitable on masonary pedestal etc., complete complying with standard specification and as directed by the department officers.
50
-
-
... More
Supply and laying of 3C x 2.5 Sq mm copper XLPE armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
1715
-
-
... More
Supply and clamping of 3C x 2.5 Sq mm copper XLPE LTUG armoured cable on post or on wall with MS clamps.
550
-
-
... More
Supply and fixing of 24-30W LED COB Spot Recessed mounted fitting [Model 'CDR-213-24-30/40-SL-NWH Crompton / Equivalent] included driver complete with Beam angle 36 degree, Vertical Tilt 30 degree ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
100
-
-
... More
Supply and fixing of 25W circular luminaire fitting [Model No.TORUS600RDP/S25WLED830SPMMAWH Havells / Equivalent] included driver complete ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
25
-
-
... More
Supply and fixing of 6M-12M RGB Flood Light Fitting [ Model 'CFS -517 Crompton / Equivalent] included driver / controller complete ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers..
34
-
-
... More
Supply and fixing of under water Pool Light Fitting [ Crompton / Equivalent] including driver / controller complete with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the department officers.
40
-
-
... More
Sulpply and installation of 6000mm pole made of circular mild steel pipe of two section, Bottom section 165.1mm Dia x 4.5mm thick with 1500mm Height & Top section 114.3mm Dia x 3.2mm thick with 2632mm Height. Decorative base made of Gravity Die-cast aluminium (300mm Dia x 205mm Height) covered on bottom and top section joint area in the pole. Bracket-double arm with 2Nos.50W LED ornamental fitting (Model No.KL-6799 Pelican Fortis / K-Lite / equivalent)a split constructed type, Bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, with a MS ring upto a height of 1410mm and on top a gravity die cast aluminium flower bud design (205mm Dia x 111mm Height). The elegantly curved double arm made of MS pipe 38.1mm Dia x 2mm thick, with MS scroll, is fixed to the stem by cast iron clamps and cast-iron knobs at both the open ends to fix pendant luminaire at 982mm on either side from the vertical axis of the bracket stem. PDC aluminium service door 348mm height x 110mm width shall be provided with control gear tray, prewired with 2.5 Sq.mm cable, 6A SP MCB and 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Mild steel mounting plate 280mm Dia x 12mm thick to be fixed on masonary pedastal. The pole is coated with primer & powder coating complete, with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour etc., complete complying with standard specification and as directed by the department officers.
8
-
-
... More
Sulpply and installation of 3000mm pole made of circular mild steel pipe of two section, Bottom section 139.7.1mm Dia x 3.6mm thick with 750mm Height & Top section 76.1mm Dia x 2.6mm thick with 2238mm Height. (Model No.KL-4222 K-Lite / equivalent) . PDC aluminium service door 348mm height x 110mm width shall be provided with control gear tray, prewired with 2.5 Sq.mm cable, 6A SP MCB and 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Mild steel mounting plate 200mm Dia x 12mm thick to be fixed on masonary pedastal. The pole is coated with primer & powder coating complete, with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour etc., complete complying with standard specification and as directed by the department officers
12
-
-
... More
Supply and fixing of Post top luminaire of make 20W LED fixed (Model No.KL-4925 K-Lite / Equivalent) in the base of the Existing pole etc., complete complying with standard specification and as directed by the department officers.
6
-
-
... More
Supply and Fixing of 45 W LED MAGUDAM model top Light Luminar on DECORATIVE BRACKET (Model No. 4999 K-Lite / Equivalent) on base of the Existing pole etc., complete complying with standard specification and as directed by the department officers.
6
-
-
... More
Add GST 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%