Nuclear Fuel Complex Tender

... More
The NFC has issued a formal invitation for competitive bids for the Nuclear Fuel Complex project, for Geotechnical Investigation At Zirconium Complex, Pazhayakayal, Tuticorin. in Tuticorin, Tamil Nadu, with an estimated contract value of Rs. 63,83,000. The bid opening date for this tender is 22-10-2026 and the last date for bid submission is 20-11-2026. Interested bidders for Nuclear Fuel Complex tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Nuclear Fuel Complex - NFC Tender - TN Tender

Opening Date22 Oct 2026
Closing Soon20 Nov 2026
Tender Amount₹ 63,83,000 
Notes
Download

Costs

Description

Geotechnical Investigation At Zirconium Complex, Pazhayakayal, Tuticorin.

AI Insights

Unlock AI Insights for this Tender

Sign in to request AI-powered insights, eligibility criteria and automated analysis for this tender.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Setting up of boring rig at each borehole location including moves between borehole positions, locating and marking the location on the ground by actual survey, setting up all field test equipment and bringing all personnel to the location, making area good for setting up rig etc. complete. Any criss-cross or back and forth movement of the rig can take place, all as per specification & drawing and as directed by the Engineer-in-charge.

16

-

-

... More
Boring vertically through all kinds of soils, weathered rock and soft rock/boulders if any, met during drilling with suitable and adequate equipment of diameter 116 / 150 mm or more for all depths measured below existing ground level at rig location, casing shall be provided wherever required & as directed by Engineer-In-Charge.

240

-

-

... More
Drilling vertically through bedrock strata (Hard rock), using NX/ NQ size diamond bit, using double tube core barrel with suitable core catcher, including collection and logging of cores, placing them in approved core boxes made of Galvanised iron (GI) 22 guage of standard size, numbering and indexing each core, noting the lithology, colour photographs (100X150mm size) of rock cores, locking arrangements, labeling and transporting the boxes to core store/laboratory located with in BARC (V) campus and as per the direction of EIC for the following depths measured from existing ground level all as per with requirements as per IS:4078 and as directed by Engineer In Charge.

-

-

-

... More
0m to 20m. From G.L

24

-

-

... More
20m to 40m. From G.L

24

-

-

... More
Obtaining 90mm diameter, 450mm long undisturbed soil samples (UDS) from boreholes at every change in stratum or for every 1.5m stratum depth, whichever is less, as per IS:2132, WITH JARRING LINK and wax sealing and labelling the container & to be tested in site laboratory used for determining various parameters all as per specifications and as directed by Engineer-In-charge. Note: First UDS sample shall be collected at 0.5m/1.0m depth in general.

160

-

-

... More
*NOTE for Item No 1.07, 1.08, 1.09: Standard penetration test shall be conducted at 1.5m interval. Sequence of conducting SPT shall be changed in each bore hole. Say for first bore hole SPT started at 1.5 m depth then 3.0 m, 4.5m……….. etc. For next bore hole within a building/ facility, it shall be started at 1m depth then 2.5m, 4.0m …… etc. Similarly for other bore holes. So that staggered value of SPT’s obtained for entire site.

-

-

-

... More
Conducting Standard Penetration Tests (SPT) soil & soft and weathered rock at every change in stratum or 1.5m, whichever is less, as per IS:2131, and collecting, packaging and labelling disturbed soil/rock samples above and with a part of the distrubed soil samples from SPT sampler to be sealed immediately after collection to completely retain all moisture within the sample ( to be used in laboratory for Grain Sieve Analysis, hydrometer or pipette analysis, Liquid Limit, Plastic Limit, Plastic Index, Specific Gravity, chemical analysis and any other tests), and other part of the sample to be collected, packaged, sealed, labelled and to be placed in core boxes all as per specifications and as directed by Engineer-In-Charge.

160

-

-

... More
Conducting Standard Penetration Tests (SPT) in soil, soft and weathered rock at every change in stratum or 1.5m, whichever is less, as per IS:2131, and collecting, packaging, sealing and labelling disturbed soil/rock samples and to be place in core boxed all as per specifications and as directed by Engineer-In-Charge.

32

-

-

... More
Conducting Standard Penetration Tests (SPT) in rock with RQD greater than 10% and less than up to 25% as per IS:2131, including replacement of SPT shoe by a new SPT shoe for each SPT all as per specifications and as directed by Engineer-In-Charge.

12

-

-

... More
Conducting single packer permeability test in weathered and hard rock upto maximum effective pressure of 10Kg/sq.cm for each rocky stratum or at every 3m depth or depth corrosponding to RQD values of 25%, 50% and 75%, all as per IS:5529 (Part 2). Each unit of this item shall consist of a series of tests with pressure of three(3) equal increments to the maximum and three(3) equal decrements etc., as per specifications and as directed by Engineer- In- Charge.

16

-

-

... More
Conducting Pressuremeter Test as per IS:12955(Part 2)/ ASTM D4719 in NX/NQ size bore holes

-

-

-

... More
In Soil and Weathered Rock(RQD less than 10%)

6

-

-

... More
In Hard Rock

6

-

-

... More
Bursting of pressuremeter probe

6

-

-

... More
Observation of ground water table and its variation and collecting ground water samples from boreholes at specified depths (minimum 1 litre) as per IS:6935 and as directed by the Engineer-In-Charge.

16

-

-

... More
Conducting Cross borehole test as per ASTM D-4428M/IS:13372 (Part 2) comprising of three boreholes (NX/NQ size), at various depths, including backfilling of boreholes after completion of test, excluding drilling of bore holes only, all as per drawings, specifications and as directed by Engineer-In-Charge. NOTE: 1. Drilling of bore holes shall be paid separately under relevant items No.6,7,7.1 and 7.2 2. The tests are to be performed in orthogonal directions as specified in the drawing. 3. The test conducted in each direction shall be considered as one test. (1No.) 4.Cross bore hole test in one direction shall comprise of one source borehole (main borehole) and two receiver boreholes spaced 3m apart as shown in the drawing. 5. The test on the orthogonal direction shall have the same source borehole(main borehole) and two more receiver boreholes in the orthogonal directions spaced 3m apart as shown in the drawing. 6. Cost includes supplying, providing and installing PVC pipes to the full depth of borehole creating of annular space, grouting with bentonite/ cement slurry. 7. The annular space shall be grouted properly and there should not be any gap left in the annular space between the pvc pipe and borehole wall.

6

-

-

... More
Backfilling of boreholes with 1:1 cement : bentonite / mud grout as per specifications.

16

-

-

... More
Collection of soil samples at 0.5m, 1m, 2m depths, packing and labeling of soil samples (Undisturbed/disturbed samples), conducting field tests for bulk and dry density, field moisture. Samples so collected should be sufficient for conducting field and lab tests as per specifications. Size of pit shall be 1.2m x1.2m or as decided by the Engineer-In-Charge as per the site conditions and technical requirements.

16

-

-

... More
LABORATORY TESTS ON SOIL

-

-

-

... More
Conducting grain sieve analysis of soil(Sieve analysis & Hydrometer analysis) and submission of grain size distribution curve as per IS:2720(Part-4) of the soil (SPT/UDS) samples and Classification of soil as per IS:1498 for every soil stratum in each borehole in alternate and staggered manner to represent each soil stratum. Sutability of Soil for various purpose shall be reported as directed by the Engineer In Charge. ** Note: Distribution curve, Cu, Cc, D50 and soil classification shall be mentioned in the report.

-

-

-

... More
Grain Sieve analysis.

160

-

-

... More
Hydrometer or Pipette analysis

100

-

-

... More
Conducting tests for Atterberg/Consistency Limits (SPT/UDS) samples such as Liquid limits, Plastic limits, Plasticity Index, Shrinkage limits, Shrinkage ratio to represent each soil stratum and submission of reports complete geotechnical characterization and engineering properties of soil as per specifications and IS:2720(Part 5&6) and as directed by Engineer In Charge.

-

-

-

... More
Liquid limit, Plastic Limit and Plasticity Index

100

-

-

... More
Shrinkage limit and Shrinkage Ratio

100

-

-

... More
Conducting Natural Moisture content and Specific gravity as per IS:2720 (Part 2 & Part 3 ) and other parameters like bulk and dry density, void ratio etc of SPT/UDS soil samples to represent each soil stratum as per specifications and as directed by EIC.

160

-

-

... More
Conducting of Density Index( Relative Density) of cohessionless soils by Vibratory Table method on UDS/DS as per IS 2720 (Part-14) and as directed by Engineer In Charge.

100

-

-

... More
Chemical analysis of undisturbed soil samples or disturbed SPT soil samples coated with wax including Total soluble solids, Organic matter, pH, total Soluble sulphates (as SO3 & SO4), chlorides, Nitrate Contents, chemical salinity and any other chemicals harmful to the foundation material as per IS:2720 (Part 21, 22, 26, 27) as per specifications and as directed by Engineer In Charge.

50

-

-

... More
Same as in Item No. 2.07 above, but on 2:1 water:soil extract of the soil samples, giving sulphates as SO3 only.

32

-

-

... More
Chemical analysis of sub soil water samples, including colour, odour, turbidity, pH, Specific conductivity at 25 deg. and carbonates, nitrate, organic matter, sulphates as SO3, chlorides, soluble salt content etc as per IS:3025 for one or more water samples collected from each boreholes and submission of report as per specifications and as directed by Engineer-In-Charge.

50

-

-

... More
Conducting Permeability test ( constant head method for coarse grained soil and falling head method for fine grained and cohessive soils) in laboratory as per IS:2720 (Part -17) and as per IS 2720(Part -36 for granular soil) as per specifications and as directed by Engineer-In-Charge.

32

-

-

... More
Consolidation tests on undisturbed soil samples or on soil samples representative to each soil stratum compacted to specified density, giving full test results including unit weights, specific gravity, e-log p curve, virgin curve, pre-consolidation pressure (P0), initial and final void ratios, compression index(Cc), coefficient of permeability(Cv), coefficient of compressibility(av) and coefficient of volume change(mv) and t50 or t90 for all pressure increments etc and settlement calculations as per IS: 2720 (Part-15) & as directed by Engineer-In-Charge. (Tests without presentation of lab test readings for individual load increments and consolidated report as per APPENDIX A and B of the IS:2720 (Part-15) and without these results the test shall not be paid.)

16

-

-

... More
Unconfined Compressive Strength test on undisturbed soil samples of cohesive soils of each soil stratum as per IS:2720 (Part- 10) along with submision of report of compression strength, undrained shear strength and bearing capacity as directed by Engineer-In-Charge.

16

-

-

... More
Conducting Direct shear test in consolidated drained condition on undisturbed soil samples or soil samples compacted to specified density and submiting full test report including lab readings of complete test, cohesion and angle of friction (CD test), shear strength etc. Tests to be conducted as per IS:2720 (Part-13) or as per IS:2720 (Part-39) for soils containing gravel) and as per direction of Engineer-In-Charge.

16

-

-

... More
Conducting Triaxial Shear Strength Test on undisturbed soil samples or on soil samples compacted to specified density representative to each soil stratum. Tests to be conducted along with submission of test reports including lab observation readings, cohession and angle of internal friction, shear strength envelope, stress-strain behaviour, poissions ratio and elastic modulus as per specifications and IS:2720(Part-11&12) and as directed by Engineer-In-Charge.

-

-

-

... More
Unconsolidated Undrained (UU, without pore water pressure measurement)

16

-

-

... More
Consolidated Undrained (CU including pore water pressure measurement)

16

-

-

... More
LABORATORY TESTS ON ROCK

-

-

-

... More
Conducting True Specific gravity of rock core samples corresponding to each rocky strata and submission of reports as per IS: 1122 and specifications as directed by Engineer-In-Charge.

6

-

-

... More
Conducting water absorption of rock samples as per IS:1124 and specification as directed by Engineer-In-Charge.

6

-

-

... More
Unit weight, water content, porosity, bulk density, dry density of rock sample corresponding to each rocky strata as per IS:13030 and specifications as directed by Engineer-In-Charge.

6

-

-

... More
Conducting Unconfined compressive strength of rock core at depths corresponding to RQD=25%, 50% and 75% or corrosponding to each rocky strata with submission of Unconfined compressive strength of intact rock as per procedure in IS:9143 and stress-strain curve, poissions raatio and deformation modulus as per IS:9221 and specification as directed by Engineer-In-Charge.

6

-

-

... More
Point load strength index test on rock core at depths corresponding to RQD=25%, 50% and 75% or corrosponding to each rocky strata as per IS:8764 and as per specifications as directed by Engineer-In-Charge.

6

-

-

... More
Brazilian test on rock core at depths corresponding to RQD=25%, 50% and 75% or corrosponding to each rocky strata along with submittion of tensile strngth as per IS:10082 and as per specifications as directed by Engineer-In-Charge.

6

-

-

... More
Conducting Triaxial compression test on rock core with internal pressure up to 160kg/sq.cm on minimum 3 samples with 3 different confining pressures, at depths corrosponding to RQD=25%, 50% and 75% or corrosponding to each rocky strata as per procedure in IS:13047or ASTM D 2664-86 and submission of report including cohession and angle of inter friction, shear strength envelope along with stress-strain curve, poissions raatio and deformation modulus as per specification as directed by Engineer in Charge.

6

-

-

... More
Petrographic examination for mineral composition.

6

-

-

... More
REPORT

-

-

-

... More
Preparation and submission of Three (3) hard & soft copies (on DVD) of Draft reports as specified followed by Six (6) hard copies of Final report of Geotechnical Investigations as detailed in specifications along with 6 soft copies of the same on the DVD along with bore hole location drawing. Field and laboratory record sheets shall also to be submitted.

1

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.